• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.43-48
• /
• 2009

The purpose of this study is to show how to eliminate the noises and to obtain the data related with the relationship between AE signal characteristics and mechanical behaviors for the pressure vessel steel. Various kinds of noises are introduced into the AE data in the course of experiments. Accordingly, real AE data have to be obtained after tests. AE test was carried out under four point bending load. Among AE signals, counts and signal strength are used to find out the differences of AE characteristics between the basemetal and weldment. After tests, this paper shows the procedures of filtering the noises against basemetal of the pressure vessel steel to obtain the real data around crack tip. Relationships between plastic zone size and cumulative AE counts are shown also. AE signals were absent within an elastic region, regardless of the specimens. Most of AE signals are produced in the process of plastic deformation. The deformation and fracture modes of basemetal and weldment are quiet different.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.392-397
• /
• 1996

To produce low salt fermented anchovy by an accelerated method with Asp. oryzae and Bacillus sp. koji, enzyme activity and variation of microflora during the 60 day fermentation were examined. Bacterial counts changed a little during the fermentation with the highest on day 40 for proteolytic and anaerobic bacteria and on day 20 for aerobic bacteria. Proteolytic, lipolytic, aerobic, and anaerobic bacteria counts were higher in the Bacillus sp. koji added anchovy paste than in others. The protease and lipase activities reached the highest point on day 20 and 30, respectively, and decreased gradually afterwards. The protease activity was higher in Asp. oryzae koji than in bacillus sp. koji, but the lipase activity was to the contrary.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1667-1671
• /
• 2024

This paper presents a neutron/gamma detector based on a micropixel avalanche photodiode and a plastic scintillator that monitors the status of the accelerator-driven intense resonance neutron source (IREN) facility by measuring the neutron/gamma intensity in the target hall. The electronics of the neutron/gamma detector has been designed and developed. The size of the plastic scintillator was selected to be 3.7 × 3.7 × 30 mm³ due to the sensitive area of the MAPD. The experimental results demonstrated a dependence between the count rate of the detector and the frequency of the accelerator. The detector is sensitive to intermediate and fast neutrons. The minimum detectable energy was determined to be 200 keV using Cs-137 point gamma source. The maximum counting rate of the detector from TTL out is about 2.2⋅10⁶ counts/sec, but for analogue output it is about 2⋅10⁷ counts/sec. The detector can not allow discriminating neutrons and gamma rays by charge integration method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.577-582
• /
• 2015

This paper proposes an efficient detection of absolute position of a robot joint using two incremental encoders. We considers a robot joint comprising a motor, a reducer, two encoders, and a motor drive. An incremental(first) encoder provides motor's rotor position or input position of reducer while another incremental(second) encoder does output position of the reducer. A table is made where the relationship between the first and the second encoder counts is recorded. The key point is placed where the table is constructed: when a pulse occurs in the second encoder, there exists a corresponding unique count value of the first encoder. The absolute position is detected using the table by searching the second encoder position corresponding to the first encoder count value when a pulse occurs in the second encoder. The proposed method needs a small rotation, as just one second encoder's pulse angle, for the initial absolute position detection.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.614-622
• /
• 2018

Based on army operating road profile, the endurance test of military vehicle aims to reproduce the similar loading conditions with mixture of proving ground tracks. It is so called as endurance test mode and its optimal generation is important to meet high reliability of endurance test. In this paper, proving ground optimization is proposed to achieve a close match to the target profile. Several performance measures such as torque-revolution counts or transmission ratio for the powertrain system can be considered as one of the objective functions. However, the one-side optimal endurance test mode may give the poor solution in the whole system point of view. To incorporate several goals simultaneously, this paper employs multi-objective optimization technique to generate endurance test mode. One of the most widely used method, weighted-sum method is applied here and the case study is discussed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.473-478
• /
• 2009

The purpose of this study is to evaluate the behaviour of the plastic deformed zone at crack tip on the standard Charpy specimens which were taken from the multi-passed weld block of the pressure vessel steel. Notch was machined on the standard Charpy test specimens and pre-crack which was located around the fusion line was made under the repeat load. Four point bend and acoustic emission tests were carried out simultaneously. The size of plastic region at crack tip was calculated using stress intensity factor. Relationships between characteristics of acoustic emission and plastic zone size at crack tip were discussed through the cumulative AE energy. Regardless of the specimens, AE signals were absent within the elastic region almost and most of AE signals were produced at the plastic deformation region from yield point to the mid-point between yield and maximum load. More AE signals for the weldment were produced compared with the base-metal and PWHT specimen. Relations between plastic deformed zones at crack tip and cumulative AE energy for the weldment and PWHT specimen were different quietly from the base-metal. Besides, number of AE counts for the weldment was the larger than those of the base-metal and PWHT specimen.

• Structural Engineering and Mechanics
• /
• v.30 no.2
• /
• pp.135-146
• /
• 2008

This study utilizes the fine-tuning and small-digit characteristics of the successive zooming genetic algorithm (SZGA) to propose a method of structural damage detection in a continuum structure, where the differences in the natural frequencies of a structure obtained by experiment and FEM are compared and minimized using an assumed location and extent of structural damage. The final methodology applied to the structural damage detection is a kind of pseudo-discrete-variable-algorithm that counts the soundness variables as one (perfectly sound) if they are above a certain standard, such as 0.99. This methodology is based on the fact that most well-designed structures exhibit failures at some critical point due to manufacturing error, while the remaining region is free of damage. Thus, damage of 1% (depending on the given standard) or less can be neglected, and the search concentrated on finding more serious failures. It is shown that the proposed method can find out the exact structural damage of the monitored structure and reduce the time and amount of computation.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.36-43
• /
• 1999

The present study was performed to investigate biodegradation rate of dichlorvos and methidathion. In the biodegradation test of two pesticides by the modified river die-away method from June 17 to August 22, 1998, the biodegradation rate constants and half-life were determined in Nakdong(A) and Kumho River(B). Biodegradation rate of dichlorvos was 4.51% in A sampling point, 6.88% in B sampling point after 7 days. Biodegradation rate constants and half-life of dichlorvos were 0.0066 and 105 days in A sampling point, 0.0102 and 67.9 days in B sampling point, respectively. Biodegradation rate of methidathion was 23% in A sampling point, 36% in B sampling point after 7 days. Biodegradation rate constants and half-life of methidathion were 0.0377 and 18.4 days in A sampling point, 0.0641 and 10.8 days in B sampling point, respectively. Biodegradation rate of methidathion was faster than that of dichlorvos. This suggested that the difference in biodegradation of pesticides was due to difference in the water quality and standard plate counts in the Nackdong and Kumho Rivers. The result of correlation analysis between biodegradation rate constants of the pesticides and water quality(DO, BOD, SS, ABS, NH$_3$-N, and NO$_3$-N) showed significant correlation with BOD, SS and NH$_3$-N at the 5% significant level. A significant linear equation was obtained from regression analysis at the 5% significant level, whereas, dependent variables were BOD, SS and NH$_3$-N, and the biodegradation rate constant was independent variable. It is suggested that dichlorvos will be mainly degraded by hydrolysis, and for methidathion was both hydrolysis and biodegradation. A significant QSAR equation was obtained from regression analysis at the 10% significant level, whereas, dependent variable is biodegradation rate constants of BPMC, chlorothalonil, dichlorvos and methidathion, vapor pressures, partition coefficients and water solubilities of the pesticides are independent variables. Also, a significant linear equation was obtained from regression analysis at the 1% significant level, whereas, dependent variable is biodegradation rate constants of BPMC, chlorothalonil, dichlorvos and methidathion, hydrolysis rate constants of the pesticides are independent variables. It is suggested that the pesticides will be degraded by main degradation factor when the pesticides was affected both hydrolysis and biodegradation.

• Publications of The Korean Astronomical Society
• /
• v.7 no.1
• /
• pp.231-253
• /
• 1992

A model for the distribution of stars in the disk and the spheroid of our Galaxy is reexamined from an edge-on view of the Galaxy obtained by selecting infrared sources from the IRAS Point Source Catalog. The sources are counted as a function of galactic latitude. longitude and $12{\mu}m$ apparent magnitude. The source counts are reasonably separated into the disk component and the spheroid component contributions and each of the contributions is further interpreted as a convolution of a spatial density distribution and a luminosity function based on the least-square fit method. The spatial density of the disk component has an exponential radial scale length of $h_R{\sim}2.6\;kpc$ and the vertical distribution follows a canonical $sech^2$ law with a scale height $h_z{\sim}240\;pc$. The distribution of the spheroid component can be represented by an oblate spheriod with an axis ratio $k{\sim}0.61$ and a de Vaucouleurs' $r^{1/4}$ law with an effective radius of $R_e{\sim}120\;pc$. The steep density gradient of the spheroid component is consistent with that of late M giants in the central bulge. The luminosity functions of the disk and the spheroid component stars resemble respectively those of the K luminosity function of disk M giants (Garwood and Jones 1986) and the bolometric luminosity function of M giants in bulge fields (Frogel et al, 1990).

• International Journal of Oral Biology
• /
• v.40 no.3
• /
• pp.143-146
• /
• 2015

The purpose of this study was to compare the effect of different methods of hand washing by counting the number of bacteria on the hand surface. Eighteen clinicians were chosen and divided into three groups, consisting of six clinicians each. Culturing of the right raw palms of all individuals was performed. Individuals in the control group washed hands for 5 seconds with antimicrobial soap. Group 1 washed their hands for 10 seconds with antimicrobial soap. Group 2 washed with an instant alcohol-based hand sanitizer. After the respective washes, re-culturing of the right raw palm was done for each member of all groups. The colony-forming units (CFU) were calculated at each time point, and the reduction rate of CFU among the three groups were statistically evaluated using student t-test. All groups showed a significant decrease in CFU, according to the time applied (P<0.01). In addition, the reduction rate of CFU between the groups were statistically evaluated with ANOVA (P<0.01). It showed statistically difference between the control group and group 1, control group and group 2. The present study confirmed that the hand washing method with antimicrobial soap for 10 seconds and hand sanitizer, including alcohol, were excellent for decreasing the number of bacteria on the hand surface.