• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.1-13
• /
• 1995

In this paper, we evaluated the mean acquisition time and it's variance of the rapid synchronization system using the DMF(Digital Matched Filter) under the DS/CDMA system which uses the long period PN code. And we implemented the synchronization system that satisfies the specification demanded by the proposed EIA/TIA Interim Standard of Qualcomm Company. We showed that the state of the PN spreading code was estimated using the DMF(Digital Matched Filter) and then exact and fast chip synchronization could be achieved by the early-late tracking loop in the multiple channel environment. And we suggested the possibility that this synchronization system could be useful in the emerging digital cellular DS/CDMA system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.688-695
• /
• 2003

In this paper, the parallel sub-filter searching structure to be adapted that divides a filter into several sub filters and the parameter decision technique to control adaptive parameters with power of received signal in the code acquisition system using adaptive filter are proposed. The numerical results for the system probabilities are derived that the code acquisition system using parallel sub-filter searching structure is statistically analyzed. Also, characteristic of the parameters in adaptive code acquisition system is analyzed by simulations and the parameter decision technique through SNRc estimation is explained. The system with parallel sub-filter searching structure outperforms by 1∼l.5 dB for 16 taps, 5∼6 dB for 64 taps. And the system with parameter decision technique works efficiently with the reasonable degree of degradation about 1 ∼2.5dB for 16 and 32 taps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.38-46
• /
• 1992

In this thesis, a high speed code synchronization circuit is implemented, which is applicable to frequency hopping FSK tranceiver within 68-88 MIBz band- width. synchronization Process consists of two steps, initial synchronization and tracking. A modified matched filter method using two channel passive correlators matched with short hopping frequencies, synchronization prcfix. is proposed for initial synchronization. To increase probability of initial synchronization, prefix are transmitted repeatedly. The outputs of correlators are sent to synchronization decision circuit, and code start time Is extracted by synchronizatlon decision circuit-Modified matched fitter method makes it possible to reduce complexity in hardware and obtain code acquisition rapidly.Clock recovery circuit regenerates PN code clock for tracking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.400-410
• /
• 1988

In this paper, a fast synchronization system using SAW TDL matched filter and SAW recirculation loop not only for acquisition but also tracking in the direct sequence spread spectrum communication receiver in case of low SNR was designed and its characteristics were investigated. When signal of 16dB SNR was inputed at the receiver, the PN code of the receiver could be synchronized from the extracted signal for synchronization through SAW TDL matched filter and SAM recirculation loop for 30 recirculations. And the average synchronization time of this system was calculated. From the results, we found that this synchronization system could achieve faster synchronization of PN codes in the receiver under the circumstances of low SNR than that of using only matched filter.

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.95-101
• /
• 2008

In this paper, we study an optimum design of search synchronization structure for Baseband Modem to support ISO/IEC 18185-5 and 24730-2 Standard. For DSSS Modem, we design the code acquisition and tracking structure which are important in receiver operation, and examine the parameters to be considered. The data and PN chip transmission rates and processing gain of the proposed modem are 59.7 kbps, 30.521875 Mcps, and 27 dB, respectively. This indicates that the noise immunity of the proposed modem is 17dB better than IEEE 802.11b (Processing gain : 10dB). Therefore, we design the optimum structure for the modem search synchronization which is compatible to the proposed modem standard.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.54-65
• /
• 2000

We propose a parallel acquisition scheme using antenna arrays for initial acquisition of direct-sequence spread-spectrum (DS-SS) signals. The proposed parallel scheme can lower substantially the range of detectable signal-to-noise ratio (SNR) as compared to the conventional parallel scheme with a single antenna. The proposed scheme uses the sum of the independent decision samples from antenna arrays corresponding to an identical subsequence of the pseudonoise (PN) code as a decision variable. We derive the probabilities of detection, missing, and false alarm under an additive white Gaussian noise (AWGN) channel and a flat Rayleigh fading channel. Using these, we get the mean acquisition time of the proposed scheme. From numerical results, we see that the acquisition performance becomes improved continually as the number of antennas increases.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.1247-1250
• /
• 2005

이 논문은 multicarrier CDMA 이동 통신 시스템에서 직-병렬 혼합 pseudo-noise (PN) 코드 동기 획득 기술을 제안 했으며 다중경로 페이딩 채널에서 multiple access interference (MAI) 의 영향을 분석하였다. 직-병렬 혼합 동기 획득 방식은 입력되는 코드 위상의 불확정 영역 전체를 직렬 획득 방식과 병렬 획득 방식을 조합하여 탐색하는 방식이다. 이러한 방식은 완전 병렬획득보다 MAI의 환경에서 mean acquisition time (MAT)이 조금 늦어지지만 하드웨어의 구조를 훨씬 단순화 할 수 있다. 검파 및 오경보 확률을 closed-form 표현으로 mean acquisition time (MAT)를 유도하였다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.997-1004
• /
• 2012

In this paper, we propose and implement a signal quality measurement algorithm for CDMA2000 1x terminal. The proposed algorithm is suitable to be implemented in software on a PC-based platform and extract the received signal after carrying out equalization, PN code acquisition and tracking, frequency and phase offset compensation with 4-oversampled input signal. Then, through despreading and demodulation with the extracted signal, the proposed algorithm regenerate the reference signal to be used in measurement. The signal quality is measured using this regenerated signal and the extracted signal.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.27-35
• /
• 1999

In this paper, we propose an error detection scheme of phase offsets for binary sequences including PN (Pseudo Noise) sequences based on the number theoretical approach. It is important to know phase offsets of spreading sequences in the CDMA (Code Division Multiple Access) mobile communication systems because phase offsets of the same spreading sequence are used to achieve the acquisition and are used to distinguish each base station. When the period of the sequence is not very long, the relative phase offset between the sequence and its shifted replica can be found by comparing them, but as the period of the sequence increases it becomes difficult to find the phase offset. The error detection failure probability of the proposed method is derived, and it is confirmed by the simulation results. We also discuss the circuit realization of the proposed method and show it can be easily implemented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.12-20
• /
• 2000

In this paper, we propose to use nonparametric detector for the PN code acquisition in DS/CDMA systems. Because the detector is nonparametric, Ive can decide the threshold of the detector without first haying to estimate the valiance of time-varying interference. We compare the proposed detector with the conventional detector by showing both analytic and simulation results. From these results, we can observe that the DS/CDMA system with the proposed detector have better performance than that with the conventional detector when the exact estimation of the interference variance is not possible.