• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.17-22
• /
• 2009

Two different organic-inorganic hybrid thin film transistors (OITFTs) with the structures of glass/ITO/ZnO/PMMA/Al (staggered structure) and glass/ITO/PMMA/ZnO/Al (inverted staggered structure), were fabricated and their electrical and structural properties were compared. The ZnO thin films used as active channel layers were deposited by the atomic layer deposition (ALD) method at a temperature of $100^{\circ}C$. To investigate the effect of the substrates on their properties, the ZnO films were deposited on bare glass, PMMA/glass and ITO/glass substrates and their crystal properties and surface morphologies were analyzed. The structural properties of the ZnO films varied with the substrate conditions. The ZnO film deposited on the ITO/glass substrate showed better crystallinity and morphologies, such as a higher preferred c-axis orientation, lower FWHM value and larger particle size compared with the one deposited on the PMMA/glass substrate. The field effect mobility ($\mu$), threshold voltage ($V_T$) and $I_{on/off}$ switching ratio for the OITFT with the staggered structure were about $0.61\;cm^2/V{\cdot}s$, 5.5 V and $10^2$, whereas those of the OITFT with the inverted staggered structure were found to be $0.31\;cm^2/V{\cdot}s$, 6.8 V and 10, respectively. The improved electrical properties for the staggered OITFTs may originate from the improved crystal properties and larger particle size of the ZnO active layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.866-870
• /
• 2014

In solid oxide fuel cell system, yttria-stabilized zirconia is generally adopted as the electrolyte, which has high strength and superior oxygen ion conductivity, and the air electrode and the fuel electrode are attached to this. Recently, new structure of 'layered planar SOFC module' was suggested to solve the reliability problem due to the high temperature stability of a sealing agent and a binding material. In this study to materialize the air electrode in a layered planar SOFC module, the LSM ink was coated to form homogeneous electrode in the channel after the ink preparation. As the porosity control agent, PMMA or active carbon powder was adopted with use of a commercial dispersant in ethanol. The optimal amounts of both the porosity control agents and the dispersant were determined. Four (4) vol% of the dispersant for the LSM-PMMA case and 15 vol% for LSM-carbon powder showed the lowest viscosities respectively to indicate the best dispersed states of the slurries. With PMMA and carbon powder, sintered LSM ink shows the relatively homogeneous distributions of pores and with increases of the agents, the porosities increased in both cases. From this, it can be thought that the amount of the PMMA or carbon powder could be used to control the porosity of the LSM ink.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.116-119
• /
• 1997

In this paper A double-layer organic electroluminescent(EL) device was fabricated using a TPD(N,N'-dipheny] -N,N'-bis(3-methylphenyl)-[1,1'-biphenyl]-4.4'-diamine: aromatic diamine), as a hole-transport material and tris (8-hydroxy quinolinate) aluminum(Alq$_3$) as a an emiting material and its performance characteristics were investigated. structure of devices is ITO/TPD/Alq$_3$/Al. we have fabricated hole transport layer of two types. Doping material of Hole Transport material is Poly(methyl methacrylate)(PMMA) and PEI(Poly-Ether-Imide). Carrier injection from the electrodes to the doped PMMA and PEI layer through the dopants and concomitant electroluminescence from Alq$_3$were observed. Green emission with luminance of 40cd/m$^2$was achieved at a drive voltage of 30V

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.43-43
• /
• 2009

Organic TFT(OTFT)에서 중요시되는 게이트 절연막을 개선 하고자 본 연구에서는 게이트 절연막에 대한 전기적 분석을 하였다.OTFT의 절연막으로 널리 연구되고 있는 PVP를 포함한 다른 2개의 polymer, PMMA, PVA에 OTS 코팅을 하였다. MIM구조의, OTS 코팅이 되지 않은 각 polymer가 증착된 그룹과 OTS 코팅을 한 polymer그룹에 대하여 전기적 및 표면특성을 비교 분석하였다. 그 결과, 모든 polymer의 표면특성이 향상되었으나, 전기적인 특성에 대한 향상 정도는 polymer 마다 차이를 보였다. 특히, PMMA는 OTS와 정확성이 좋지 않아 증착된 절연막 전체가 분리가 되어 전기적 특성에 대해서는 불안정한 결과를 보였으며, OTS가 코팅된 다른 폴리머, PVP, PVA에서는 표면특성의 향상과 더불어 향상된 전기적 특성을 얻을 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.23-24
• /
• 2008

본 논문에서는 폴리머(Polymer)기판에서의 레이저의 조사밀도와 기판의 온도 변화에 따라서 성장하는 ZnO박막의 구조적 특성을 알아보기위해 펄스 레이저 증착 법으로 PMMA(Polymethly Methacrylate)기판상에 ZnO박막을 형성하였다. 레이저의 조사 밀도는 2 J/$cm^2$에서 3 J/$cm^2$까지 기판의 온도는 상온에서부터 $50^{\circ}C$까지 변화시켰고 박막의 구조적 특성을 X-선 회절법(XRD)과 주사 전자 현미경(SEM)으로 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04a
• /
• pp.47-51
• /
• 2004

The aspherical lens are used as objective lens of optical pickup. The sample product is made before manufacturing the injection mould of lens to examine the design factor. The optimum cutting conditions of the main spindle speed, the depth of cut, the feed rate are found when we cut PMMA and PC lens sample with ultra-precision SPDT. The demanded surface roughness 10 nm Ra, aspherical form error 0.5 ${\mu}m$ P-V for aspherical lens of optical data storage device are satisfied for PMMA, but not satisfied for PC.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.349-349
• /
• 2005

수동소자를 PCB(Printed Circuit Board) 안으로 집적하기 위한 방법의 일환으로 polymer-metal, polymer-ceramic composite에 연구가 국내외 연구 국내외 연구기관에서 광범위하게 진행되고 있다. 본 연구에서는 polymer-metal-ceramic composite 에서 PZT-coated Ni의 volume fraction에 따른 유전율 변화에 대하여 조사하였다. 원료로는 PZT(52/48) solution. 니켈금속분말, PMMA(polymethyl methacrylate)를 사용하였다. 전기적 특성은 임피던스분석기를 이용하여 측정하였으며 mixing rule과 percolation theory를 이용하여 결과를 해석하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.18-24
• /
• 1999

Microcellular foaming is being researched as a method of maintaining and improving the mechanical characteristics of plastics as well as saving the material costs. This can not only improve the mechanical properties including impact strength of plastic by producing cells with the size of few ${\mu}$m diameters within the plastic, but also can save the material cost of plastic products with the general volumetric expansion of 2 to 10 times. But quite a long time is required for the gas to be absorbed in the plastic. Therefore consistent research should be done to reduce the saturation time of gas into the plastic and this paper provides the method of water microcellular foaming process as one of the methods using the high diffusivity of water. In addition, we can improve impact property of foamed plastic by using this method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.345-345
• /
• 2008

최근 전자 소자의 고주파화, 소형화에 대한 요구가 증대 되면서 많은 소자들을 하나의 시스템에 3차원적으로 실장시키는 SOP (System-on-Package)가 새로운 대안으로 떠오르고 있으며 SOP를 실현하기 위해서는 집적기판에 대한 저온화 공정 기술이 절실히 필요한 실정이다. 현재 집적기판에 사용되는 재료로서 세라믹이 널리 알려져 있지만 세라믹은 취성이 있으며 $1000^{\circ}C$ 이상의 고온화 공정 프로세스를 필요로 하는 근본적인 약점이 있다. 이에 본 연구에서는 상온에서 고속으로 치밀한 성막을 가능케 하는 Aerosol Deposition Method (ADM)를 이용하여 최초로 세라믹-폴리머 복합체 후막을 성공적으로 제작하였다. XRD와 FT-IR 분석 결과 $Al_2O_3$-PMMA, $Al_2O_3$-PI 혼합물을 출발 파우더로 사용하여 제조한 후막이 세라믹-폴리머 복합체임을 확인할 수 있었다. 또한 SEM 분석결과 $Al_2O_3$-PMMA 복합체와 $Al_2O_3$-PI 복합체의 표면 양상이 매우 다르다는 점을 확인하였으며 $Al_2O_3$-PMMA 복합체의 성막률이 $Al_2O_3$-PI 복합체의 성막률에 비해 매우 낮음을 확인하였다. 이러한 현상들은 폴리머 파우더들의 경도와 탄성 차이 때문인 것으로 사료되어 이를 증명하기 위한 실험을 실시하였다. 결국 PMMA 막과 PI 막에 대한경도측정결과와 PMMA 파우더와 PI 파우더의 유성 볼밀링 전후에 대한 SEM 이미지를 통해 PMMA 파우더가 PI 파우더에 비해 경도가 낮으며 반면 탄성이 높다는 것을 간접적으로 확인할 수 있었다. 이와 같은 분석을 통하여 ADM을 이용한 세라믹-폴리머 복합체 후막의 제조에 있어 폴리머 파우더의 경도와 탄성이 매우 큰 영향을 미친다는 것을 알 수 있었다. 본 연구에서는 세라믹-폴리머 복합체 후막을 성공적으로 제조하기 위해서 폴리머 파우더의 적절한 선택이 중요함을 알 수 있었으며 ADM을 이용한 세라믹-폴리머 복합체 후막의 제조에 대한 가이드 라인을 제시할 수 있을 것으로 기대된다.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.91-103
• /
• 2023

This study aims to investigate the dynamic fracture characteristics of rocks and rock-like materials subjected to the Nonex Rock Cracker (NRC), a vapor pressure crushing agent that produces vapor pressure by instantaneously vaporizing a liquid mixture crystallized through the thermite reaction. Furthermore, the study seeks to develop an analytical technique for predicting the fracture pattern. A dynamic fracture test was performed on a PMMA block, an artificial brittle material, using the NRC. High-speed cameras and dynamic pressure gauges were employed to capture the moment of vapor pressure generation and measure the vapor pressure-time history, respectively. The 2-dimensional Dynamic Fracture Process Analysis (2D DFPA) was used to simulate the fracture process caused by the vapor pressure, with the applied pressure determined based on the vapor pressure-time history. The proposed analytical method was used to examine various fracture patterns with respect to granite material and high-performance explosives.