• Journal of Magnetics
• /
• v.4 no.4
• /
• pp.115-118
• /
• 1999

$MgFe_2O_4$ has been studied with X-ray diffraction, M ssbauer spectroscopy and vibration sample magnetometer (VSM). The crystal structure of the sample is found to have a cubic spinel structure with a lattice constant of $a_0=8.390$\pm$0.005$\AA$.$ The iron ions at both A (tetrahedral) and B (octahedral)sites are found to be in ferric high-spin states. Its Neel temperature TN is found to be 710$\pm$3 K. The Debye temperature for the A and B sites found to be 417$\pm$5 K and 331$\pm$5 K., respectively. Atomic migation from the A to the B sites starts near 425 K and increases rapidly with increasing temperature to such a degree that 31% of the ferric ions at the A sites have moved over to the B sites by 600 K.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.985-995
• /
• 2003

In this paper, a study on optimization of three dimensional multi-layered metallic disk array structure(MDAS) excited by circular waveguides was performed to shape efficient flat-topped element patterns(FTEP) of ${\pm}$20$^{\circ}$ beam width. Each radiating element of the MDAS is composed of input, transition and radiation circular waveguides and finite metal disks stacked on radiation circular waveguide. It has an array structure of a hexagonal lattice appropriate for the conical beam scanning. The analytic algorithm for the MDAS was proposed and the code was also programmed using it. Optimal design parameters of the MDAS were determined through the optimal simulation process to obtain ${\pm}$20$^{\circ}$ FTEP. Also, bandwidth characteristics for FTEP and reflection coefficients of the MDAS were investigated and, as the results, it was shown that the MDAS could shape good FTEPs of ${\pm}$20$^{\circ}$ beam width in main planes at least within a 5.6 % frequency band.

• Journal of Forest and Environmental Science
• /
• v.32 no.1
• /
• pp.99-102
• /
• 2016

Echolocation call structure and intensity were measured from the Malaysian Myotis muricola, which were recorded from the hand-released bat. The Malaysian M. muricola produced typical FM call pattern of the genus Myotis, producing steep, downward frequency-modulated calls. The average PF of calls is $64.39{\pm}1.33(kHz)$. Discrete PF patterns of two types are found, which consist of 63.39 kHz and 66.15 kHz. The averages of SF and D are $126.07{\pm}3.37kHz$ and $2.14{\pm}0.29ms$, respectively. There are various IPI lengths with average of $42.97{\pm}12.68ms$. A pulse consists of two harmonies which consist of the first harmony with wider bandwidth and the second harmony with narrower bandwidth. The PF of the first harmony is higher than that of the second harmony. The typical FM call structure, with two harmonies and wide bandwidth, would be highly related to fast flying and wide screening in the dense forests.

• Journal of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.293-298
• /
• 1963

The crystal structure of ethylenediamine dihydrochloride has been determined by the two-dimensional Patterson methods and refined by two-dimensional Fourier syntheses. The unit cell dimensions are a = 4.44${\pm}$0.02, b = 6.88${\pm}$0.02, c = 9.97${\pm}$0.02 ${\AA}$, ${\beta}$ = 92${\pm}$$1^{\circ}$. The space group is $P2_1_{/c}$. The carbon and nitrogen atoms in the ethylenediamine itself lie on one plane and its structure has a trans-form with a centre of symmetry in it, and C-C distance of 1.54 ${\AA}$, C-N distance of 1.48${\AA}$ and C-C-N bond angle of $109.07^{\circ}$. The molecules are linked by N-H${\cdots}$Cl hydrogen bonds with distance of 3.14, 3.16 and 3.22 ${\AA}$ forming three dimensional network. The values of reliability factor for F(okl), F(hol) and F(hko) are 0.11, 0.10 and 0.09 respectively.

• Animal cells and systems
• /
• v.16 no.6
• /
• pp.498-505
• /
• 2012

This study uses the mitochondrial DNA control region to identify the genetic diversity and population structure of the marbled soles (Pleuronectes yokohamae) that inhabit Jinhae Bay and Yokji Island in the nearby sea and the adjacent waters of Namhae, Hansan Island, and Jaran Bay. Direct sequencing of the PCR products revealed 379 bp sequences with 83 variable nucleotide sites, defining a total of 91 haplotypes. The haplotype diversity was high, ranging from $0.917{\pm}0.031$ to $0.983{\pm}0.008$, and nucleotide diversity ranged from $0.015{\pm}0.008$ to $0.024{\pm}0.012$. In addition, 48 haplotypes (52.7%) were unique. Pairwise $F_{ST}$ values were very low, with the maximum value occurring between PYH (Hansan Island) and PJI (Jinhae Bay) ($F_{ST}$ = 0.011). Therefore, no significant genetic differentiation was evident between any pair of sampling localities.

• Korean Journal of Environment and Ecology
• /
• v.18 no.2
• /
• pp.131-141
• /
• 2004

To investigate the vegetation structure of mountain ridge from Namdeogyusan to Sosajae in Baekdudaegan which is the greatest chain as well as the major ecological axix of the Korean Peninsula, sixteen sites(size 500$m^2$) were set up and surveyed. By using TWINSPAN technique, the plants community was divided and summarized into five groups, those are four Quercus mongolica dominated communities and Quercus mongolica-Pinus densiflora community. Four Quercus mongolica dominated communities have differentiated from subtree dominant species. Vegetation structure of each community have explained using important percentage by layer. In descriptive analysis, average number of species is 27.8$\pm$7.5 and average number of individuals is 687.6$\pm$326.8 at unit area(500$m^2$).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.495-501
• /
• 2013

In the present study, a BLDC motor for a pump in which a neodymium PM is replaced with a Ferrite PM has been developed in preparation for the cost increase and to ensure the stability of the resource supply. One of the currently used motors for pumps is a BLDC motor having an interior PM wherein a rare-earth PM is adopted. However, a BLDC motor for a pump is designed to have large airgap because of the use of a waterproof insulator according to its structural characteristics, and therefore, a SPM structure is suitable. Hence, an SPM BLDC motor in which a Ferrite PM is used is designed. Nevertheless, the use of Ferrite instead of rare-earth materials causes a deterioration in the performance of the electric motor, such as a decrease in the BEMF and the maximum power of the motor and the irreversible demagnetization of the PM. In order to mitigate such disadvantages, an optimized design of the BLDC motor is developed by changing each design parameter and by improving the electromagnetism structure.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.23-35
• /
• 1998

A new instantaneous torque control is presented for a high performance control of a permanent magnet(PM) synchronous motor. In order to deal with the torque pulsating problem of a PM synchronous motor in a low speed region, new torque estimation and cotrol techniques are proposed. The linkage flux of a PM synchronous motor is estimated using a model reference adaptive system technique and the torque is instantaneously controlled by the proposed torque controller combining an integral variable structure control with a space vector PWM. The proposed control provides the advantage of reducing the torque pulsation caused by the non-sinusoidal flux distribution. This control strategy is applied to the high torque PM synchronous motor drive system for direct drive applications and implemented by using a software of the DSP TMS320C30. The simulations and experiments are carried out for this system and the results well demonstrate the effectiveness of proposed control.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.156.2-156.2
• /
• 2016

The variation of the surface structure of the Al adsorbed W(110) planes according to the coverage and the substrate temperature has been investigated using LEED and ISS When the Al atoms were adsorbed on the W(110) surface at room temperature, a p($1{\times}1$) of the fcc (111) face were found at the coverage higher than 4 ML. When the substrate temperature was kept at 900 K during Al adsorption and the coverage was 1.0 ML, the surface revealed a p($1{\times}1$) of the bcc(110) face and when the coverage is 1.5 ML, the surface showed a p($1{\times}1$) of the bcc (110) face together with a p($1{\times}1$) double domain structure (fcc (111) face) rotated ${\pm}3^{\circ}$ from the [100] direction of the W(110) surface. When Al atoms were adsorbed on the W(110) surface at the substrate temperature of 1000 K and the coverage was higher than 1.0 ML, the surface revealed a p($1{\times}1$) of the bcc(110) face together with p($1{\times}1$) double domain structure(fcc(111) face) rotated ${\pm}3^{\circ}{\sim}5^{\circ}$ from the [100] direction of the W(110) surface. When Al atoms were adsorbed on the W(110) surface at the substrate temperature of 1100 K and the coverage was 0.5 ML, Al atoms formed a p($2{\times}1$) double domain structure When the coverage was 1.0 ML, the double domain hexagonal structure (fcc(111) face) rotated ${\pm}5^{\circ}$ from the [100] direction of the W(110) surface and another distorted hexagonal structure was found. Low-energy electron diffraction results along with ion scattering spectroscopy results showed that the Al atoms followed the Volmer-Weber growth mode at high temperature.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.510-514
• /
• 2022

In this paper, we propose the development of high-sensitivity low-end radiation measuring sensor module. The proposed measurement sensor module is a scintillator + photomultiplier(SiPM) sensor optimization structure design, amplification and filter and control circuit design for sensor driver, control circuit design including short-distance communication, sensor mechanism design and manufacturing, and GUI development applied to prototypes consists of, etc. The scintillator + photomultiplier(SiPM) sensor optimization structure design is designed by checking the characteristics of the scintillator and the photomultiplier (SiPM) for the sensor structure design. Amplification, filter and control circuit design for sensor driver is designed to process fine scintillation signal generated by radiation with a scintillator using SiPM. Control circuit design including short-distance communication is designed to enable data transmission through MCU design to support short-range wireless communication function and wired communication support. The sensor mechanism design and manufacture is designed so that the glare generated by wrapping a reflective paper (mirroring) on the outside of the plastic scintillator is reflected to increase the efficiency in order to transmit the fine scintillation signal generated from the plastic scintillator to the photomultiplier(SiPM). The GUI development applied to the prototype expresses the date and time at the top according to each screen and allows the measurement unit and time, seconds, alarm level, communication status, battery capacity, etc. to be expressed. In order to evaluate the performance of the proposed system, the results of experiments conducted by an authorized testing institute showed that the radiation dose measurement range was 30 𝜇Sv/h ~ 10 mSv/h, so the results are the same as the highest level among products sold commercially at domestic and foreign. In addition, it was confirmed that the measurement uncertainty of ±7.4% was measured, and normal operation was performed under the international standard ±15%.