• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.464-476
• /
• 2019

Objectives: This study aimed to assess the exposure levels of tollbooth workers to diesel particulate matter using black carbon (BC) and to find the correlations among variables associated with BC using the motor vehicle management act regulated by the Ministry of Land, Infrastructure and Transport. Methods: This study was performed over 14 days at a university in Seoul. BC levels were monitored using an aethalometer and were conducted around the breathing zones of the workers. There were three sampling locations: inside the tollbooth (front gate and rear gate) and an office as a control group. T-test, correlation, and multiple linear regression analysis were performed using SPSS. Results: The geometric mean (GM) of BC_30min concentrations in the exposure group was 2.44 ㎍/㎥, approximately 1.4 times higher than the control group (1.75 ㎍/㎥). The GM of BC_30min concentrations was 2.75 ㎍/㎥ during the heavy traffic time (9-10 am) and 2.30 ㎍/㎥ during non-heavy traffic times (p<0.001). The multiple linear regression analysis shows that the number of all types of vehicles and PM_2.5 concentrations in the atmosphere were factors increasing the GM of BC(ln(BC_30min)) concentrations (adjusted R²=0.42, p<0.001). The workers were constantly exposed to low concentrations (GM of BC_30min=2.44 ㎍/㎥), but they were exposed to peak concentrations instantly (BC_10sec=3545.04 ㎍/㎥). When the GM of BC_30min concentrations was momentarily represented as high, it was identified that a vehicle mainly using diesel fuel or an aging vehicle had passed. Conclusions: A ventilation system should be installed in the closed tollbooth or aging vehicles should be controlled so as not to pass tollbooths.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.337-344
• /
• 2005

A tactile sensor employs a piezoelectric element to detect contact frequency shifts and thereby measure the stiffness or softness of material such as tissue, which allows the sensor to be used in many fields of research for urology, cardiology, gynecology, sports medicine and caner detection and especially for cosmetics and skin care. In this study, reliability of the tactile sensor system was investigated with its manual application to the muscles susceptible to temporomandibular disorders. Stiffness and elasticity of anterior temporalis, masseter and trapezius muscles were calibrated bilaterally from 5 healthy men with an average of 24.5$\pm$0.94 years. The tactile sensor used in this study had a computer-controlled and motor-driven sensor unit which automatically pressed down on the skin surface over the muscles being measured and retracted, thereby providing the hysteresis curve. The slope of the tangent of the hysteresis curve (${\Delta}f/{\Delta}x$) is defined as stiffness of the muscle being measured and the distance between the two parts of the curve as its elasticity. To determine inter-examiner reliability, all the measurements were performed by the two examiners A and B, respectively and the same examination were repeated with an interval of 2 days for intra-examiner reliability. The results from this study demonstrated high reliability in measuring stiffness and elasticity of anterior temporalis, masseter and upper trapezius muscles using a tactile sensor system. It is suggested that the tactile sensor system can be a highly reproducible and effective instrument for quantitative evaluation of the muscle in head and neck region.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.1
• /
• pp.25-35
• /
• 2003

Objectives: The aim of this study was to investigate 1) the prevalence of depressive symptoms, 2) the severity of depressive symptoms, 3) the correlation of depressive symptoms with clinical variables, and 4) factors that contribute to depressive symptoms in patients with Parkinson's disease. Methods: One hundred eighteen patients with Parkinson's disease referred from the Parkinson's Disease Clinic of Dong-A University Hospital, Busan, Korea, completed a self-administered questionnaire package, which included basic demographic data, the Beck Depression Inventory, the Parkinson's disease quality of life questionnaire, the Symptom Checklist-90-Revision(SCL-90-R), and the Spielberger's State-Trait Anxiety Inventory. In addition, a structured interview and a complete neurological examination, including the Hoehn and Yahr stage, the motor part of the Unified Parkinson's Disease Rating Scale(some selected scales of UPDRS part III), the Schwab and England Activities of Daily Living scale(ADL), and the Korean version of Mini-Mental State Examination were performed. Results: 1) Based on BDI score, subjects were divided into four groups:severely(40.7%), moderately(13.6%) and mildly(12.7%) depressive and non-depressive(33.1%). 2) The severity of depressive symptom in Parkinson's disease was positively correlated with Hoehn and Yahr(H & Y) stage(r=0.34, p<0.0001), the severity of motor symptom(r=0.35, p<0.0001), and trait anxiety inventory(r=0.33, p<0.001). On the other hand, the severity of depressive symptom was negatively correlated with educational level(r=-0.34, p<0.001), ADL(r=-0.37, p<0.0001) and Parkinson's disease quality of life (PDQL)(r=-0.69, p<0.0001). Among several clinical variables, the PDQL was the most influential factor predicting whether the depressive symptom was present or not. Conclusion: This study suggests that depressive symptom is very prevalent among patients with Parkinson's disease. Data from this study indicate that medical staffs who take care of patients with Parkinson's disease should pay attention to finding and treating depressive symptom among their patients. With appropriate psychiatric intervention, patient's depressive symptom can be minimized or alleviated and thus, the quality of life in these patients is likely enhanced.

• Clinical and Experimental Pediatrics
• /
• v.52 no.4
• /
• pp.458-463
• /
• 2009

Purpose : Schizencephaly is a uncommon congenital brain anomaly characterized by congenital clefts spanning the cerebral hemispheres from pial surface to lateral ventricles and lined by gray matter. In this study, we investigated the clinical manifestation and radiologic findings of pediatric schizencephaly. Methods : The data of 13 patients who were diagnosed with schizencephaly in Severance Childrens Hospital and Yongdong Severance Hospital from January 2005 to December 2007 were analyzed retrospectively. Results : The mean age at diagnosis was $9.08{\pm}2.67$ months old and ranged from 1 to 30 months. The ratio of male to female patients was 3.33:1. Five (38.5%) patients had bilateral clefts, while 8 (61.5%) had unilateral clefts. Five (38.5%) patients had closed lip clefts, and 4 (30.8%) had opened lip clefts. Four (30.8%) patients had multiple clefts. Associated anomalies showed in all cases. The clinical features consisted of mild unilateral weakness in 7 (53.8%) cases and a hemiparesis was present in 3 (23.1%) patients. A tetraparesis was in 3 (23.1%) patients. There was no difference in motor deficit between unilateral and bilateral clefts. Delayed development was observed in all cases. Epilepsy was present in 7 (53.8%) patients, 5 patients with unilateral clefts and 2 patients with bilateral clefts. Three (42.8%) patients showed intractable seizures. Conclusion : Schizencephaly showed variable clinical manifestations and radiologic findings in association with the types and locations of the clefts. It is necessary to diagnose schizencephaly early and to detect the development of epilepsy. Intensive and large studies of the correlation of clinical outcomes and radiologic findings should be continued for more effective treatment.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.450-459
• /
• 2009

The aim of this study was to measure the initial dynamic modulus changes of light cured composites using a custom made rheometer. The custom made rheometer consisted of 3 parts: (1) a measurement unit of parallel plates made of glass rods, (2) an oscillating shear strain generator with a DC motor and a crank mechanism, (3) a stress measurement device using an electromagnetic torque sensor. This instrument could measure a maximum torque of 2Ncm, and the switch of the light-curing unit was synchronized with the rheometer. Six commercial composite resins [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), and Clearfil AP-X (CF)] were investigated. A dynamic oscillating shear test was undertaken with the rheometer. A certain volume ($14.2\;mm^3$) of composite was loaded between the parallel plates, which were made of glass rods (3 mm in diameter). An oscillating shear strain with a frequency of 6 Hz and amplitude of 0.00579 rad was applied to the specimen and the resultant stress was measured. Data acquisition started simultaneously with light curing, and the changes in visco-elasticity of composites were recorded for 10 seconds. The measurements were repeated 5 times for each composite at $25{\pm}0.5^{\circ}C$. Complex shear modulus G*, storage shear modulus G', loss shear modulus G" were calculated from the measured strain-stress curves. Time to reach the complex modulus G* of 10 MPa was determined. The G* and time to reach the G* of 10 MPa of composites were analyzed with One-way ANOVA and Tukey's test ($\alpha$ = 0.05). The results were as follows. 1. The custom made rheometer in this study reliably measured the initial visco-elastic modulus changes of composites during 10 seconds of light curing. 2. In all composites, the development of complex shear modulus G* had a latent period for $1{\sim}2$ seconds immediately after the start of light curing, and then increased rapidly during 10 seconds. 3. In all composites, the storage shear modulus G" increased steeper than the loss shear modulus G" during 10 seconds of light curing. 4. The complex shear modulus of Z1 was the highest, followed by CF, Z2, Z3, TC and DF the lowest. 5. Z1 was the fastest and DF was the slowest in the time to reach the complex shear modulus of 10 MPa.