• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.303-309
• /
• 2011

This study was carried out to investigate the evaluation of insecticidal efficacy and control effect in field of 10 environmental-friendly agricultural materials (EFAM) and seasonal occurrence at the vineyards to the Lycorma delicatula. L. delicatula nymphs occurred from late May to late August the highest early June (1st nymph) while adults occurred from late July to November with the highest peak of early October (preovipositing female) in 2010. Total population density of L. delicatula was the highest in early June. For the 3rd~4th nymphal instars and adults, EFAM (Spider, Jindikap-plus and Byejin-${\alpha}$) showed perfect insecticidal activity 2hour after treatment. Seoncho showed insecticidal activities 96.7% within 48 hour. Residual effects between EFAM showed 55.5% Spider at recommended concentration at 7 days after treatment(DAT), the other EFAM had low efficacy. Jindikap-plus and Spider showed 99% control value on nymphs in the field test at 3DAT, appeared control value more than 90% at 7DAT. Also, the control effects of Jindikap-plus and Spider were showed the adult mortality of 100% and 98.2% respectively at 3DAT, 90.6% and 84.6% respectively at 7DAT. Whereas the other EFAM had low efficacy. Jindikap-plus and Spider were excellent control effects compared with Acetamiprid WP.

• Proceedings of the Korea Society of Costume Conference
• /
• 2003.05a
• /
• pp.34-34
• /
• 2003

본 연구는 체형의 특성이 현저히 나타나는 40~50대의 Plus-size 여성을 대상으로 체형의 특징이 고려된 치수체계에 대해 맞음새가 우수한 재킷을 개발하고, 이 원형을 토대로 하여 체형의 단점을 보완할 시각적 효과를 연구하기 위해 Plus-size에 해당하는 여성을 선정하여 수트(suit)를 제작한 후 착의 평가하여 Plus-size에 적합한 수트를 제안하는데 목적을 두고 있다. 결과를 요약하면 다음과 같다. 1. Plus-size 여성의 착용실태를 파악하기 위해 실시한 착용실태 조사는 판매자의 측면의 심층면접과 소비자 측면의 착장조사로 구분하여 조사하고 분석하였다. 착용실태조사 결과, Plus-size 여성은 의복구매시 맞음새와 편안함을 중시하고 상완부와 어깨의 두께, 가슴둘레와 복부의 비만등의 체형단점을 갖게 되므로 판매자측에서는 의복제도 시에 등품, 앞품, 상완부, 복부의 여유분을 고려하고 있었다. 시각적 효과로는 세미피트 스타일의 프린세스 라인과 허리선+20, 30cm의 재킷길이, 그리고 테일러드 칼라, 스테인 칼라, 라운드 네크라인이 판매자과 소비자의 양측면에서 선호되고 있었다. 2. Plus-size 여성의 체형에 맞음새가 우수한 재킷원형을 개발하기 위해 Plus-size 여성복의 재킷 원형 중 4종의 기존원형을 선정하고, 착의 피험자 3인을 대상으로 3차에 걸친 착의실험을 통해 연구 원형을 개발하고 평가단을 구성해 객관적인 평가 33문항에 대한 외관 관능검사를 실시하였다. 1) 가슴둘레 여유분을 8~9cm, 허리둘레 여유분을 6~7cm, 엉덩이둘레 여유분을 6~8cm로 적용하여 맞음새를 향상시켜 날씬해 보이는 효과를 높였다. 2) 진동깊이 계산식은 (B/10+10.5)+2cm 적용하고, 진동두께 계산식은 (B/8-1.5)+2cm를 적용함으로써 진동깊이와 진동두께의 편차가 작아짐으로 인해 소매부위와 진동부위의 맞음새를 향상시켰다. 3) 가슴둘레의 증가에 따라 등길이에 앞길이 치수를 증가시키는 계산식을 설정하여 앞가슴둘레의 맞음새를 향상시켰다. 4) Plus-size여성의 경우 허리부분의 신체적합성을 높이기 위하여 사이드 판넬(side panel)의 재킷원형으로 하였다. 앞 허리와 배 부분의 지방 침착이 크므로 앞 허리둘레 다아트 폭과 앞판 사이드 판넬(side panel) 솔기 다아트 폭을 작게 설정하고, 뒤판 사이드 판넬 솔기 폭을 크게 설정하였다. 5) 어깨끝점 사이길이는 다른 부위의 체지방 침착과 같이 비례적으로 증가하지 않으므로 표준체형에 비해 좁게 설정하였다.

• Korean Journal of Food Science and Technology
• /
• v.51 no.3
• /
• pp.248-257
• /
• 2019

This study aimed to determine the chemical components of different cultivars (Gabjubaekmok, Sangjudungsi, and Godongsi) of persimmon (Diospyros kaki Thunb.) and the effects of maturity. The detected free sugars were fructose and glucose, and glucose levels tended to increase with maturity. Palmitic acid, oleic acid, linoleic acid and stearic acid, and potassium were major components. In the amino acid component analysis, the following were usually present in the following month: glutamic acid in Gabjubaekmok in July, lysine in Sangjudungsi in August, and threonine in Godongsi in October. Vitamin C tended to increase with aging, and fruit harvested in July had the highest total phenolic and flavonoid contents. In the metabolite analysis, there were significant differences among cultivars and with maturity. The major physiological compounds were analyzed using ultra performance liquid chromatography quadrupole time-of-flight tandem mass ($UPLC/Q-TOF/MS^2$) and were citric acid and gallic aicd. As maturity progressed, citric acid increased but gallic acid decreased.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.275-298
• /
• 2017

This paper provides a practical stochastic method by which the maximum equilibrium scour depth below a pipeline exposed to random waves plus a current on mild slopes can be derived. The approach is based on assuming the waves to be a stationary narrow-band random process, adopting the Battjes and Groenendijk (2000) wave height distribution for mild slopes including the effect of breaking waves, and using the empirical formulas for the scour depth on the horizontal seabed by Sumer and Fredsøe (1996). The present approach is valid for wave-dominant flow conditions. Results for random waves alone and random wave plus currents have been presented and discussed by varying the seabed slope and water depth. An approximate method is also proposed, and comparisons are made with the present stochastic method. For random waves alone it appears that the approximate method can replace the stochastic method, whereas the stochastic method is required for random waves plus currents. Tentative approaches to related random wave-induced scour cases for random waves alone are also suggested.

• Korean Journal of Radiology
• /
• v.23 no.11
• /
• pp.1031-1043
• /
• 2022

Objective: To compare digital breast tomosynthesis (DBT) and MRI as an adjunct to full-field digital mammography (FFDM) for the preoperative evaluation of women with breast cancer based on mammographic density. Materials and Methods: This retrospective study enrolled 280 patients with breast cancer who had undergone FFDM, DBT, and MRI for preoperative local tumor staging. Three radiologists independently sought the index cancer and additional ipsilateral and contralateral breast cancers using either FFDM alone, DBT plus FFDM, or MRI plus FFDM. Diagnostic performances across the three radiologists were compared among the reading modes in all patients and subgroups with dense (n = 186) and non-dense breasts (n = 94) according to mammographic density. Results: Of 280 patients, 46 (16.4%) had 48 additional (39 ipsilateral and nine contralateral) cancers in addition to the index cancer. For index cancers, both DBT plus FFDM and MRI plus FFDM showed sensitivities of 100% in the non-dense group. In the dense group, DBT plus FFDM showed lower sensitivity than that of MRI plus FFDM (94.6% vs. 99.6%, p < 0.001). For additional ipsilateral cancers, DBT plus FFDM showed specificity and positive predictive value (PPV) of 100% in the non-dense group, but sensitivity and negative predictive value (NPV) were not statistically different from those of MRI plus FFDM (p > 0.05). In the dense group, DBT plus FFDM showed higher specificity (98.2% vs. 94.1%, p = 0.005) and PPV (83.1% vs. 65.4%; p = 0.036) than those of MRI plus FFDM, but lower sensitivity (59.9% vs. 75.3%; p = 0.049). For contralateral cancers, DBT plus FFDM showed higher specificity than that of MRI plus FFDM (99.0% vs. 96.7%, p = 0.014), however, the other values did not differ (all p > 0.05) in the dense group. Conclusion: DBT plus FFDM showed an overall higher specificity than that of MRI plus FFDM regardless of breast density, perhaps without substantial loss in sensitivity and NPV in the diagnosis of additional cancers. Thus, DBT may have the potential to be used as a preoperative breast cancer staging tool.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.49-57
• /
• 2014

Purpose: To evaluate the effect of different surface treatment methods (yttria-tetragonal zirconia polycrystal [Y-TZP] primers, air-abrasion, and tribochemical surface treatment) on the shear bond strength between (Y-TZP) ceramics and etch-and-rinse non-10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing resin cements. Materials and Methods: Y-TZP ceramic surfaces were ground flat with 600-grit silicone carbide abrasives paper and then divided into seven groups of ten. They were treated as the following: untreated (control), Monobond Plus (IvoclarVivadent), Z-PRIME Plus (Bisco Inc.), ESPE Sil with CoJet (3M ESPE), air-abrasion, Monobond Plus with air-abrasion, and Z-PRIME Plus with air-abrasion. The surface of Y-TZP specimens was analyzed under a scanning electron microscope (SEM). Non-MDP-containing cements were placed on the surface-treated Y-TZP specimens. After thermocycling, shear bond strength test was performed. Bond strength values were statistically analyzed using one-way analysis of variance and Student-Newman-Keuls multiple comparison test (P<0.05). Result: The Z-PRIME Plus treatment in combination with air-abrasion produced the highest bond strength ($14.94{\pm}1.70MPa$) followed by Monobond Plus combined with air-abrasion ($10.70{\pm}1.71MPa$), air-abrasion ($10.47{\pm}1.60MPa$), ESPE Sil after CoJet treatment ($10.38{\pm}0.87MPa$), Z-PRIME Plus application ($10.00{\pm}1.70MPa$), and then Monobond Plus application ($9.25{\pm}0.86MPa$). The control ($6.70{\pm}1.49MPa$) indicated the lowest results (P<0.05). The SEM results showed different surface morphologies according to surface treatment methods compared with the Y-TZP control. Conclusion: The shear bond strength between the Y-TZP ceramic and the non-MDP-containing resin cement was the greatest when the surface was treated with air-abrasion and MDP-containing Z-PRIME Plus primer.

• Genomics & Informatics
• /
• v.4 no.2
• /
• pp.57-64
• /
• 2006

We identified differentially expressed genes in RAW264.7 cells in response to single and double ligand treatments (LPS, $IFN{\gamma}$, 2MA, LPS plus $IFN{\gamma}$, and LPS plus 2MA). The majority of the regulated transcripts responded additively to dual ligand treatment. However, a significant fraction responded in a non-additive fashion. Several cytokines showing non-additive transcriptional responses to dual ligand treatment also showed non-additive protein production/secretion responses in separately performed experiments. Many of the genes with non-additive responses to LPS plus 2MA showed enhanced responses and encoded pro-inflammatory proteins. LPS plus $IFN{\gamma}$ appeared to induce both non-additive enhancement and non-additive attenuation of gene expression. The affected genes were associated with a variety of biological functions. These experiments reveal both dependent and independent regulatory pathways and point out the specific nature of the regulatory interactions.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.23-33
• /
• 2008

This paper proposes an approach to monitoring and scheduling methods for repetitive MIMO-FIFO DESs. We use max-plus algebra for modeling and formulation, known as an effective approach for controller design for this type of system. Because a certain type of linear equations in max-plus algebra can represent the system's behavior, the principal concerns in past researches were how to solve the equations. However, the researches focused mainly on analyses of the relation between inputs and outputs of the system, which implies that the changes or the slacks of internal states were not clarified well. We first examine several properties of the corresponding state variables, which contribute to finding and tracing the float times in each process. Moreover, we provide a rescheduling method that can take into account delays or changes of the internal states. These methods would be useful in schedule control or progress management.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.7
• /
• pp.658-666
• /
• 2004

In this paper, a two-dimensional transient ground-coupled numerical model for slab-on-grade foundation is developed and integrated into EnergyPlus. A validation analysis is first presented to ensure that for the developed building foundation heat transfer module is properly implemented within EnergyPlus. Then, the predictions from the developed model are compared to those obtained from the simplified building foundation model currently used in EnergyPlus. The results show that the developed foundation heat transfer module accounts better for the effects of the ground thermal mass attributed to the ground than the simplified foundation model currently used in EnergyPlus.

• Nuclear industry
• /
• v.22 no.6 s.232
• /
• pp.44-55
• /
• 2002