• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.498-506
• /
• 2004

교류계통에서는 사고가 발생하였을 경우 임피던스를 이용한 거리계전기와 같은 장치로 사고 위치를 파악한다. 하지만 직류계통에서는 주파수 성분이 없기 때문에 회로가 병렬로 연결된 경우에는 정확한 사고위치를 파악할 수가 없다. 전기철도와 같은 시스템에서는 전원으로 직류전압이 사용되고, 이러한 직류계통에서의 사고위치를 파악하기 위한 알고리즘이 필요하게 되었다. 본 논문에서는 전기철도와 같은 직류선로 접지의 보호알고리즘을 제안한다. 전형적인 보호알고리즘과 비교하면 제안된 알고리즘은 공급선로와 고장선로 사이의 차이를 구별하는 장점을 갖는다. 제안된 알고리즘의 내용은 블록킹 필터와 PLC(Power Line Carrier)의 사용에 의해서이다. 시뮬레이션의 결과는 제안된 알고리즘이 매우 유용함을 나타낸다.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1255-1260
• /
• 2011

In this paper, we study on the reliability of Very High-rate Power Line Communication (VH-PLC) for Smart Grid, so that the resultant data rate is over 400Mbps at a physical layer. Firstly, reviewing the research trend of the PLC, we discuss the required techniques for supporting the Smart Grid. Considering a pre-specification with the value of several parameters, we investigate a multi-carrier modulation technique to overcome limitations of higher rate transmission under power line channel environments. Then, we propose a system specification of the VH-PLC in the sense of enhancing two features. One is resolving the problem of the co-existence of the deployed high-speed PLC according to the published standardization of KS X 4600-1 in Korea. The other is getting better performance on the grid adopting the diverse element techniques, such as multi-carrier modulation, a subcarrier utilization mode, a variable rate LDPC (Low Density Parity Check) code, and a time and frequency diversity technique. Further, a simulation tool, composed of an Event-Driven simulator and a Time-Driven simulator, is developed for the purpose of verifying the system performance and continuously cross-checking the test bench signal of the proposed VH-PLC system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.841-845
• /
• 1991

There are Carrier Current Communication or Power line Carrier (PLC) Communication conducted data exchange using power line Which is installed existing indoor. Power line is possible to construct data link economically, on the other hand, have an inferior transmission environment such as irregular noise and severe level variation. The purpose of this paper is to present transmission possibility for PLC using spread spectrum technique. In the initial synchronization, established computer simulation for the S/N in relation to PN code generator. By using this result, construct the prototype SS system and then experiment the transmission characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1002-1003
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, another is to choose the strong modulation method which sends signals to long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. AWGN, impulse noise and attenuation are created. To overcome the noise and attenuation. Multi-carrier Modulation methods like as OFDM and DMT which divide the channel into many sub-channel are powerful communication methods for PLC. In this paper, PLC channels are simulated for getting BER by Matlab simulink

• 한국전자파학회논문지
• /
• 제14권1호
• /
• pp.54-61
• /
• 2003

본 논문은 중 전압 전력선(22.9 kV)에서 방사되는 전자파 특성결과를 보여주고 있다. 측정은 주파수범위 9 kHz∼30 MHz의 통신 신호를 중 전압 전력선로에 인가하였을 때 측정을 하였다. 측정결과 단일 반송신호보다 다중 반송신호에서 방사되는 전자파의 특성이 우수하며 다중반송신호의 세기가 20 dBm일 때 전력선 통신 신호는 1.8 km까지 전송 가능함을 알 수가 있었다. 전기장의 세기는 10 m 법으로 측정하였을 때 30 MHz에서 40 dBuV/m이하의 값을 볼 수가 있었다.

• 센서학회지
• /
• 제24권5호
• /
• pp.342-347
• /
• 2015

We introduce an indoor broadcasting system using light-emitting diode (LED) lamps coupled with a 220 V power line. Two couplers connected to the power line constitute a power line communication (PLC) link. The transmission path from an LED lamp to a photodetector forms a visible light communication (VLC) link in free space. When the LED lamp is coupled to the power line, a composite PLC-VLC link is formed, making it possible to transmit a VLC signal beyond line-of-sight. In experiments, a 4 kHz analog signal modulated with a 100 kHz carrier was sent to the power line by a PLC coupler, and LED lamps coupled to the power line detected the signal and radiated it to multiple VLC receivers in the room. This configuration is useful in expanding an indoor VLC sensor network to adjacent rooms or constructing a voice broadcasting system in a building or apartments with existing power lines.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.456-458
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.476-478
• /
• 1993

Instead of installing new communication wiring to each house in the apartment house building. the power distribution network. which is already installed in the building. can be use as communication medium. In a safty management, by adoption of power line communication system, at remote we can monitor safty related sensors such as fire, gas leakage, burglar intrusion and emergency call which are located at each house. From this viewpoint, we developed security monitoring system for apartment house building using power lines. Security monitoring system consists of Power Line Communication-Sub Controller (PLC-SC). Power Line Communication-Main Controller (PLC-MC) and Management System (MS). Between a PLC-MC and a PLC-SC, the transmission rate is 1200 bps in power lines and modulation technique is frequency shirt keying (FSK). In between a PLC-MC and a MS, the transmission rate is 1200 bps in communication line (RS-485). As a result of this research. transmission loss is 0.1dB per meter of intrabuilding distribution network. Transmission can be reach in 250 meters. So it is enough to communicate for security monitoring system in apartment house building.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.370-376
• /
• 2000

분 논문은 기존의 전력선을 이용한 전력선 반송 통선 시스템의 선호 감쇠 저하 방법을 연구한다. 제안된 시스템은 별도의 통신 선로를 설치한 필요가 없고 정보화 시대에 발맞춰 원격 검침, 자정 자동화 등 여러면에서 효율적으로 사용할 수 있다. 기존 시스템은 커패시터에 의한 반송 전류의 증기와 더불어 통신전압의 강하로 정보전달의 어려움을 가지고 있다. 제안된 시스템은 내부저향이 작고 무효전력을 공급할 수 있으며 송수신단 상호간의 저임피던스 문제가 없는 특수한 구조의 스위칭 증폭기 시스템을 가진다. 본 연구는 콘덴서 부하에 의한 PLC(Power Line Carrier) 통신 장애 문제를 해결히는데 그 목적이 있다.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2281-2285
• /
• 2009

Powerline communication is the data signal which is modulated by carrier frequency through the installed powerline at in-home or office is transmitted and received signals are separated into data signal with using band-pass filter which cent-frequency is carrier frequency. The home gateway, an equipment which works as an gateway for ubiquitous home network, relays all functions of a home network. The home gateway must always be connected in order to provide seamless services. However it gives unfavorable power consumption. Therefore the needs for working in maximum power saving mode while there is no data traffic and for invoking to the normal function when it is necessary. So, in this paper we survey the development of low power PLC modem monitoring of power consumption and breaking abnormal power in the home Network.