• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.122-129
• /
• 1996

Fig. 1에서 보는 바와 같이 수 MeV의 에너지를 가진 입사이온이 고체 시료표면과 충돌했을 때 여러 가지의 상호작용과 과정들이 일어난다. 입사 아온이 표적원자의 원자가전자나 내각전자와 상호작용을 하였을 때 원자를 여기시키거나 이온화시키게 되며 입사 이온이 표적 핵과 매우 가까이 접근했을 때 입사이온과 표적 핵사이에 쿨롱상호작용이나 핵 상호작용이 일어나게 된다. 이러한 여러가지 상호작용의 결과들로부터 분석하고자 하는 시료의 성분, 구조, 상호작용 과정에 대한 정보를 얻을 수 있다. 이러한 고에너지 이온선을 이용한 분석기술로는 Fig. 1에서 보는 바와 같이 후방산란법(BS : Backscattering Spectrometry), 전방산란법(FRS : Forward Recoil Spectrometry), 핵반응법(NRA : Nuclear Reaction Analysis), 양성자여기X선검출법(PIXE : Proton Induced X-ray Emission)등과 이러한 방법들과 같이 조합하여 사용하는 이온 채널링(ion channeling)등이 있다. 본 해설에서는 이러한 분석법중에서도 널리 사용되고 있는 후방산란법과 이온 채널링에 대하여 주로 기술하고자 한다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.380-386
• /
• 2001

A nuclear microprobe system with adjustable precision object slits and a magnetic quadrupole doublet was designed by the beam optics simulation using a first order matrix formalism, and installed in a $30^{\circ}$ beam line connected with KIGAM 1.7 MV Tandem VDG Accelerator. Demagnification factors for x and y axis are calculated to be 25 and 4.9, respectively, and a minimum beam spot side is expected to be about 5 $\mu\textrm{m}$ for 3 MeV proton beams with a current of about 1 nA. A multi-purpose octagonal target chamber has been built to facilitate MeV ion-beam analytical techniques of PIXE, RBS, ERDA, and ion beam micro-machining. It contains X-ray and particle detectors, a zoom microscope, a Faraday cup, a 4-axis sample manipulator and a high vacuum pumping system. The system performance of the nuclear microprobe is now being tested, and automatic manipulator control and data acquisition system will be installed for routine applications of micro ion-beam analytical techniques.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.1
• /
• pp.21-33
• /
• 2010

The objective of this study was to estimate the $PM_{2.5}$ source apportionment at the Pinnacles National Monument IMPROVE site in western coastal USA. The PMF was applied to identify the existing sources and apportion the $PM_{2.5}$ mass to each source. To analyze local source impacts from various wind directions, the NPR analysis was performed using source contribution results with the wind direction values measured at the site. Also, PSCF was applied to identify the locations by point sources relative to the back trajectories. A total of 1,634 samples were collected from March 1988 to May 2004 by IMPROVE sampler and 32 chemical species were analyzed by PIXE, PESA, XRF, IC, and TOR methods. The PMF modeling identified seven sources and the average mass was apportioned to gasoline vehicle, secondary sulfate, aged sea salt, secondary nitrate, wood/field burning, diesel emission, and soil, respectively. In this study, the average mass was apportioned to gasoline vehicle (33.0%), secondary sulfate (25.7%), aged sea salt (17.8%), and secondary nitrate (10.1%). Also, this study suggests the possible role for source apportionment study of $PM_{2.5}$ at similar areas such as wildness, national park, and coastal areas in Korea.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.26-33
• /
• 2008

In order to fully understand the chemical properties of Asian dust particles, especially their transformation and aging processes, it is desirable to investigate the nature of original sands collected at local source areas in China. This study presents the detailed properties of sands collected at four different desert regions (Yinchuan, Wuwei, Dulan, and Yanchi) in China. Most of sands have irregular shape with yellowish coloration, whereas some of them show peculiar colors. The relative size distribution of sands collected at Yinchuan, Wuwei, and Dulan deserts exhibits monomodal with the maximum level between 200 and $300{\mu}$, whereas that of Yanchi desert is formed between 100 and $200{\mu}$. The mass concentration ratio of each element to that of Si (Z/Si) determined by PIXE analysis has a tendency towards higher Z/Si ratios for soil derived elements. It was possible to visually reconstruct the elemental maps on the surface of individual sands by XRF microprobe technique. In addition, the multielemental mass concentration could be quantitatively calculated for numerous spots of desert sands.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.10
• /
• pp.1105-1108
• /
• 1997

The new amorphous intermetallic compounds, M3(AsTe3)2: M=Cr, Co, Fe, were synthesized by the precipitation reaction of the Zintl anion AsTe33- with the divalent transition metal halides in aqueous solution and analyzed by EDS equipped with SEM and PIXE. The empirical formula of the specimens was found to be Fe3.0As1.8Te5.9, Co3.0As2.1Te6.5, and Cr3.0As2.0Te6.9 by the quantitative elemental analysis. The dc specific resistivity of the materials was measured as a function of temperature in the range from 20 to 300 K, in which their resistivity of Cr3(AsTe3)2 was largely dependent on temperature, while those of Co3(AsTe3)2 and Fe3(AsTe3)2 were only slightly dependent on temperature. To characterize the spin glass state of the specimens, the ac and dc magnetic susceptibility were measured and it was found that Co3(AsTe3)2 and Fe3(AsTe3)2 undergo a transition to a spin glass state at 6 K and 38 K, respectively. Magnetization data are reported as both thermal remanent magnetization (TRM) and isothermal remanent magnetization (IRM) as a function of magnetizing field and temperature.

• Journal of Environmental Health Sciences
• /
• v.36 no.1
• /
• pp.61-71
• /
• 2010

Intensive measurements of airborne respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were conducted in the downtown area of Iksan city. The $PM_{2.5}$ and $PM_{2.5}$ samples were collected twice a day in the Iksan city of Korea from October 17 to November 1, 2004. The purpose of the study was to determine the inorganic water-soluble components and trace elements of $PM_{2.5}$ and $PM_{2.5}$ in the atmospheric environment and estimate the contribution rate of major chemical components from a mass balance of all measured particulate species. The chemical analysis for PM samples was conducted for water-soluble inorganic ions using ion chromatography and trace elements using PIXE analysis. The mean concentrations of respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were $51.4{\pm}29.7$ and $79.5{\pm}39.6\;{\mu}g/m^3$, respectively, and the ratio was 0.62. The ion species of $NO_3$, $SO_4^2$, and $NH_4^+$ were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These components predominated in respirable $PM_{2.5}$ fraction, while $Na^+$, $Mg^{2+}$, $Ca^{2+}$ mostly existed in coarse particle mode. Elemental components of S, Cl, K, and Si were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These elements, except for Si, were considered to be emitted from anthropogenic sources, while Si, Al, Fe, Ca existed mainly in coarse particle mode and were considered to be emitted from crustal materials. The averaged mass balance analysis showed that ammonium nitrate, ammonium sulfate, crustal component, and other trace elements were composed of 18.4%, 13.2%, 4.8%, 3.5% for PM2.5 and 17.0%, 11.6%, 13.7%, 4.4% for $PM_{2.5}$, respectively.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.3
• /
• pp.228-235
• /
• 2015

In order to clarify the thermal and hygroscopic properties of indoor particulate matter (PM) in a semiclosed subway space, which is critically important for understanding of the distinctive particle formation processes as well as the assessment of their health effects, the size-resolved PMs (i.e., $PM_{2.5}$ and $PM_{10-2.5}$) were intensively collected on the platform of Miasageori station on the Seoul Subway Line-4. The elemental concentrations in soluble and insoluble fractions were determined by PIXE from the bulkily pretreated $PM_{2.5}$. The thermal and hygroscopic characteristics of individual particles were investigated via a combination of the unique pretreatment techniques (i.e., the high-temperature rapid thermal process and the water dialysis) and SEM-EDX analysis. Iron and calcium were unequaled in insoluble and soluble $PM_{2.5}$ fractions, respectively, with overwhelming concentration. The SEM-EDX's elemental net-counts for the pre- and post-pyrolyzed PMs newly suggest that magnesium and several elements (i.e., silica, aluminum, and calcium) may be readily involved in the newly generated subway fine PM by a high-temperature thermal processing when trains are breaking and starting. Through the water dialysis technique, it turned out that calcium has meaningful amount of water soluble fraction. Furthermore, the concentrations of the counter-ions associated with the calcium in subway $PM_{10-2.5}$ were theoretically estimated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.146.2-146.2
• /
• 2014

KIST 6MV 가속기는 이온빔 분석 그리고 가속기 질량 분석법(Accelerator mass spectrometry)으로 활용된다. 이온빔 분석으로는 RBS, TOF ERD, PIXE. ${\mu}$-Probe을 할 수 있으며 AMS(Accelerator mass spectrometry)는 액체섬광측정법(LSC)과 비교할때 민감도는 1,000배 정도로 3H, 14C, 26Al,41Ca 을 10-21 ~ 10-18 mole/mg 까지 검출 가능하여. 응용분야로는 BAMS(Biological AMS), 전통과학, 지구과학, 환경과학에 활용되고 있다. 이중 AMS의 생-의학분야(BAMS)의 응용은 최근 매우 중요하게 연구되고 있다. BAMS의 활용 연구에 사용하는 핵종으로는 주로 3H, 14C, 41Ca, 36Cl를 사용하며, 14C 화합물은 쉽게 구할 수 있고, 자연방사선 이하의 낮은 14C labeled drug 사용하기 때문에 1948년 이후 생물학 연구에 혁신적으로 활용되고 있다. 주 활용분야로는 (1) 신약개발은 임상실험 전(Phase 0) 이용되며, 14C로 표지된 bio-molecule을 자연수준의 방사선 농도에서 추적자로 사용하여 질량을 측정하는 방법을 활용. (2) 의과학분야는 인체 내에서의 추적자 연구수행 (3) 항암제 연구는 암조직 중 약물농도와 암효과의 상관성을 연구 (4) 바이오 기술 분야에서는 생약 유효물질의 체내 대사연구 등을 할 수 있어 전세계적으로 활발히 연구가 진행되고 있다. KIST에서는 6MV가속기를 BAMS 연구에 활용하기 위하여 전처리 단계의 Combustion, Gas transfer, Reduction 등을 자체 제작하여 테스트 중에 있으며, BAMS 샘플의 Gas는 호기중의 성분, 대기 성분이 있으며, Liquid는 혈액(혈장,혈청,적혈구), Solid는 DNA, 세포, 장기 뼈, 피부, 식물조직, 사료, Drug 및 그 대사 류가 있다. AMS 측정 결과는 14C/12C 비율로 나타나며 그 결과를 농도로 환산하여 분석하게 된다. 또한 분석 데이터 신뢰를 확보하기 위하여 표준시료 및 품질관리용 시료를 사용하여 BAMS분석법에 대한 검증을 실시하였다.

• Advances in environmental research
• /
• v.3 no.3
• /
• pp.231-251
• /
• 2014

The present study examines the phosphate adsorption potential and behavior of mixture of Ground Burnt Patties (GBP), a solid waste generated from cooking fuel used in earthen stoves and Red Soil (RS), a natural substance in fixed bed column mode operation. The characterization of adsorbent was done by Proton Induced X-ray Emission (PIXE), and Proton Induced ${\gamma}$-ray Emission (PIGE) methods. The FTIR spectroscopy of spent adsorbent reveals the presence of absorbance peak at $1127cm^{-1}$ which appears due to P = O stretching, thus confirming phosphate adsorption. The effects of bed height (10, 15 and 20 cm), flow rate (2.5, 5 and 7.5 mL/min) and initial phosphate concentration (5 and 15 mg/L) on breakthrough curves were explored. Both the breakthrough and exhaustion time increased with increase in bed depth, decrease in flow rate and influent concentration. Thomas model, Yoon-Nelson model and Modified Dose Response model were used to fit the column adsorption data using nonlinear regression analysis while Bed Depth Service Time model followed linear regression analysis under different experimental condition to evaluate model parameters that are useful in scale up of the process. The values of correlation coefficient ($R^2$) and the Sum of Square Error (SSE) revealed the Modified Dose Response model as the best fitted model to the experimental data. The adsorbent mixture responded effectively to the desorption and reusability experiment. The results of this finding advocated that mixture of GBP and RS can be used as a low cost, highly efficient adsorbent for phosphate removal from aqueous solution.