• 제목/요약/키워드: PIT-C

검색결과 221건 처리시간 0.038초

Early Stages in Morphogenesis of the Shell of Crenella decussata (Bivalvia: Mytilidae)

  • Kolotukhina, N.K.;Kulikova, V.A.;Evseev, G.A.
    • 한국패류학회지
    • /
    • 제27권2호
    • /
    • pp.91-97
    • /
    • 2011
  • This study examines the morphological features of larval and postlarval shells of the paedomorphic bivalve Crenella decussata Montagu, 1808 from the Sea of Japan. During the early morphogenesis of the shell of C. decussata the following characteristics appear: prodissoconch I -the anterior and posterior provincular teeth, a broad primary ligament pit located on the chondrophore; nepioconch - the anterior and posterior juvenile teeth,primary lateral teeth, fine commarginal and radial sculpture. Larvae of C. decussata distinctly differ from other mytilid larvae by a D-shaped shell, absence of umbo, astraight hinge margin, and homogeneous fine-grained sculpture without co-marginal lines of growth. These shell characters indicate lecithotrophic development of this species. Some morphostructures are revealed which might be used in crenellin taxonomy.

$MgB_2/Fe$ 선재의 초전도성에 대한 열처리 조건과 Mg 분말의 영향 (Influence of Magnesium Powder and Heat Treatment on the Superconducting Properties of $MgB_2/Fe$ Wires)

  • ;김남규;김이정;전병혁;김찬중
    • Progress in Superconductivity
    • /
    • 제9권1호
    • /
    • pp.1-4
    • /
    • 2007
  • The most common technique to fabricate $MgB_2$ superconducting wire is by powder-in-tube (PIT) technique. Therefore, the starting powder for the processing of $MgB_2$ superconductors is an important factor influencing the superconducting properties and performance of the conductors. In this study, the influence of magnesium precursor powders and annealing temperatures on the transition temperatures ($T_c$) and critical current densities ($J_c$) of $MgB_2/Fe$ wires was investigated. All the $MgB_2/Fe$ wires were fabricated by in situ PIT process. It was found that higher $J_c$ was obtained for $MgB_2$ wires with smaller particle size of magnesium precursor powders. The $J_c$ also increases with decreasing annealing temperatures.

  • PDF

한국(韓國) 선사시대(先史時代) 및 삼국시대(三國時代) 주거사(住居史)의 시대구분(時代區分)에 관한 재고(再考) (A Study on the Periodization in the History of Korean dwellings during the age of prehistory and the ancient Kingdomes)

  • 강영환
    • 건축역사연구
    • /
    • 제5권2호
    • /
    • pp.9-24
    • /
    • 1996
  • Owing to the energitic studies of the leading shcolars, some paradigmatic theories on the history of Korean dwellings have been suggested. They constructed periodization of their own and defined characteristics of each period with very limited historical materials. However the new historical materials have been discovered in the neighboring academic fields, which require to review the existing theories. This study aims at restructuring periodization in the history of Korean dwellings during the age of The prehistory and The ancient Kingdomes. Through the study, the existing theories on the same period are revived and evaluated based on the new materials. I suggest a new theory on the periodization and the characteristics of each period: a. the paleolithic period(6,000,000 B.P.-10,000 B.P.) : natural shelter, the emergence of man-made dwellings b. the neolithic period(10,000 B.P.-1,000 B.C.) : construction of pit house c. the bronze period(1,000 B.C.- 300 B.C.) : construction of semi-pit house d. the early metalic period(300 B.C. - 300 AD.) : construction of house on the ground level development of the Ondol system e. the ancient kingdomes period(300 AD - 700 AD): classification of housing type

  • PDF

금속분말이 첨가된 $MgB_2$ 선재의 제조 및 특성 (Fabrication of $MgB_2$ tape with metal powder addition)

  • 고재웅;유재무;김영국;정국채;유상임
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제8권1호
    • /
    • pp.1-4
    • /
    • 2006
  • The $MgB_2$ tapes with several metal powder addition were fabricated by PIT method with or without heat treatment. The $J_c$ value of $5.600A/cm^2$ and $16.000A/cm^2$ at 4.2 K and 5 T were obtained for the $MgB_2$ tape and 10 vol % of Cu added $MgB_2$ tape without heat treatment respectively. The $J_c$ value of $8.000A/cm^2$ and $35,000A/cm^2$ at 4.2 K and 5 T were obtained for the $MgB_2$ tape and 10 vol. % of Al added $MgB_2$ tape with heat treatment, respectively. The $J_c-B$ curve shows enhancement in $J_c$ under magnetic field. which suggests enhancement in workability and grain connectivity with several metal powder addition.

노천광산 덤프트럭의 최적 운반경로 분석을 위한 지형경사가 고려된 벡터 네트워크 자료의 생성 방법 (Creation of Vector Network Data with Considering Terrain Gradient for Analyzing Optimal Haulage Routes of Dump Trucks in Open Pit Mines)

  • 박보영;최요순;박한수
    • 터널과지하공간
    • /
    • 제23권5호
    • /
    • pp.353-361
    • /
    • 2013
  • 최근까지 노천광산을 대상으로 덤프트럭의 최적 운반경로 분석을 수행한 연구들은 주로 래스터 자료를 사용하였다. 그러나 래스터 자료는 격자 해상도에 따라 운반경로가 zigzag 형태로 심하게 왜곡될 수 있으며, 경로의 위상관계를 고려할 수 없는 한계가 있다. 벡터 네트워크 자료를 사용할 경우에는 이러한 문제점들을 해결할 수 있으나, 지형경사에 따른 덤프트럭의 성능 변화 특성이 최적 운반경로 분석시 반영될 수 있도록 할 필요가 있다. 본 연구에서는 노천광산 덤프트럭의 최적 운반경로 분석을 위해 지형경사에 따른 덤프트럭의 이동속도 변화를 반영할 수 있는 벡터 네트워크 자료의 생성 방법을 제시하였다. 수치지형모델 제작, 운반도로 디지타이징, 지형 경사도 계산, 경사도를 반영한 트럭의 이동속도 및 이동시간 계산 순으로 자료의 생성 작업이 진행된다. 제시한 벡터 네트워크 자료 생성 방법의 적용성과 효과를 알아보기 위하여 인도네시아 파시르 석탄노천광산의 로또 남부 채광장을 대상으로 간단한 사례연구를 수행한 결과, 제시한 방법이 ArcGIS Network Analyst 소프트웨어와 쉽게 호환이 가능하며, 최적 운반경로 분석시 지형경사에 따른 덤프트럭의 이동속도 변화를 효과적으로 반영할 수 있음을 확인할 수 있었다.

확률 이론의 관점에서 $25^{\circ}$ 에서 $150^{\circ}C$ 사이의 염화이온 함유수용액에서 인코넬 합금 600에서 구한 전류추이 곡선의 해석에 의한 핏트의 성장 속도론에 대한 연구 (A Study on the Pit Growth Kinetics of Inconel Alloy 600 in $Cl^--Ion$ Containing Solution at Temperatures $25^{\circ}\;to\;150^{\circ}C$ by Analysis of Current Transients in View of Stochastic Theory)

  • 박진주;변수일
    • 한국전기화학회:학술대회논문집
    • /
    • 한국전기화학회 2003년도 춘계총회 및 학술발표회
    • /
    • pp.44-44
    • /
    • 2003
  • PDF

돼지분뇨 처리를 위한 Farm-scale Two-phase Anaerobic Digester의 실증운영에 관한 연구 (A Study on the Practical Operation of a Farm-scale Two-phase Anaerobic Digester for the Treatment of Swine Manure)

  • 백인규;이상락;안정제;권윤정;맹원재
    • 한국축산시설환경학회지
    • /
    • 제6권2호
    • /
    • pp.73-81
    • /
    • 2000
  • A two-phase anaerobic digestion system for the treatment of swine waste was constructed in a commercial hog farm. The digester system was composed of 4 major units; slurry storage pit, acidogenic digester, methanogenic digester and sedimentation pit. A biogas boiler unit was also attached to maintain the digester temperature of 37$^{\circ}C$. Substrate lading was made with 2hr-interval by pumping about 2.1$m^3$ of slurry type swine waste from the slurry pit into the acidogenic digester, which corresponds to hydraulic retention time of 4 days for the acidogenic digester and of 11 days for the methanogenic digester. Digester temperature were well maintained as the set temperature of 37$^{\circ}C$ in the methanogenic digester, while the temperature in the acidogenic digester showed around 34$^{\circ}C$. pH also showed a steady-state results of 7.3 in the acidogenic digester and of 7.6 in the methanogenic digester during the operation period. Average biogas production rate was 0.66$m^3$/$m^3$ digester volume. Reduction rate of total solid and volatile solid were 42.8% and 5.8%, respectively. Total nitrogen and ammonia nitrogen were not reduced during the anaerobic fermentation, however, most of VFAs seemed to be converted to the biogas,. These fermentation performance data may suggest that he newly developed a two-phase anaerobic digester for the swine waste treatment worked so successfully.

  • PDF