• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.228-231
• /
• 2005

In this paper, we present reusable quartz master fabricated by electron-beam lithography and dry etching process of quartz, and results of injection molding based on the reusable quartz master for the manufacturing of nano-scale information media. Since patterned structures of photoresist can be easily damaged by separation (demolding) process of nickel stamper and master, a master with photoresist cannot be reused in stamper fabrication process. In this work, we have made it possible of the repeated use of master by directly patterning on quart in nickel stamper fabrication process. We have designed and fabricated four different specimens including 100nm, 140nm 200nm and 400nm pit patterns. In addition, both intaglio and embossed carving patterns are fabricated for each specimen. In the preliminary test of injection molding, we have fabricated polycarbonate patterns with varying mold temperature. We have experimentally verified the fabrication process of the reusable quart master and possibility of quartz master as direct stamper.

• Industrial Engineering and Management Systems
• /
• 제10권2호
• /
• pp.123-127
• /
• 2011

Nowadays, green purchasing, stop global warming, love the mother earth, and others that related to environment become hot issues. Manufactures industries tend to more active and responsive to those issues by adopting green strategies or program like Environmentally Conscious Manufacturing (ECM). In this article, an electronic company had applied 12 ECM Program and tries to choose one of those programs using 6 criteria, such as total cost involved, quality, recyclable material, process waste reduction, packaging waste reduction, and regulation compliance. By using multi-criteria decision making model, i.e. Analytical Hierarchy Process (AHP), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), and Modified TOPSIS methods, the ECM Program 9 (Open pit) is the best option.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.65-69
• /
• 2003

Many researches on fabrication process for BSCCO precursor powders have been developed for high J$_{c}$ BSCCO-2223 tape. Spray pyrolysis method for fabrication of precursor powder has many advantages, such as high purity, fine particle size and low carbon content of BSCCO precursor powder. Fine, spherical powders were prepared by ultrasonic spray pyrolysis from the aqueous solution of metal nitrates. BSCCO precursor powders were synthesized with various solutes concentration and heat treatment conditions. Average particle size for spray pyrolysis powders was $1.5∼3\mu\textrm{m}$. Bi-2223/Ag tape was prepared by PIT method and followed by various sintering conditions. BSCCO precursor powders were characterized by XRD, SEM, EDS, Carbon content and particle size analysis.s.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.3-5
• /
• 2000

Among the various processing techniques used in HTS wire fabrication, the PIP(Powder In Tube) method is currently one of the most promising for applications on an industrial scale. In this study, we have fabricated Bi-2223/Ag superconducting tapes using the modified PIT process, where several process factors were changed and improved, ie., powder packing, drawing, rolling and heat treatment. We obtained Bi-2223 tape that have high critical current, 46 a at 77.3 K, have high critical current, 46A at 77.3 K, self field although the tape was not pressed but only rolled. The critical current of 100m class long length tape was measured 21.6A at the same criterion. Besides, the critical current of Bi-2223/Ag tape was measured applying magnetic fields with different directions at various temperatures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.108-111
• /
• 2007

It's important to measure quantitative properties about thermal-nano variation conduct of polymer for producing high quality components using NIL process. NanoScale indents can be used ad cells for molecular electronics and drug deliver, slots for integration into nanodevices, and defects for tailoring the structure and properties. In this study, it's to evaluate mechanical characteristic of polymer such as PMMA and PC at high temperature for manufacture of nano/micro size of polymer using indenter at high temperature. At high temperature mechanical properties of polymer have extreme variation. Because heating the polymer, it becomes softer than room temperature. In this case it is especially important to study for mechanical properties of polymer at high temperature.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (1)
• /
• pp.373-375
• /
• 2002

본 논문은 실시간 운영체제에서 프로세스의 효율적인 관리를 위한 스케줄링 알고리즘을 제안한다. 따라서 CPU의 활용도를 높이고 스케줄링 시간과 인터럽트 시간을 줄임으로서 자원을 효율적으로 관리할 수 있다. 본 논문에서 제안하는 방법으로는 다중 큐에 PIT(Process Information Table)를 두어 각각의 큐에 프로세스가 들어오면 우선순위에 따라 CPU를 할당하는 방법이다. 기존의 다중 큐와는 달리 우선순위 프로세스를 보다 정확하고 빨리 찾아내어 외부 또는 내부의 인터럽트에 응답 할 수 있게 하였다. 또한 우선순위에 밀려 실행하지 못하는 프로세스는 일정 시간이 경과하면 CPU를 선점할 수 있다. 그러므로 CPU는 활용도가 높아지고 유휴 시간은 짧아지게 된다. 본 논문은 일반 펜티엄 PC에서 실험하였으며 현재 사용되는 RTOS(VxWorks, QNX)와 비교하여 다소 우수함을 보였다.

• 한국표면공학회지
• /
• 제44권6호
• /
• pp.239-245
• /
• 2011

Magnesium alloys is the lightest by structural metals, but it is not good corrosion resistant because of pit, void. Particularly, AZ31B magnesium alloy sheets that have slag, scratch by rolling process indicate some defects. The objective of this research is to perform uniform plating on AZ31B by studying etching and zincate process. Especially, zincate treatment by zinc salt and pyrophosphate is the most important in the decoration plating. Dissolution of magnesium is reduced by the formation of uniform zinc conversion layer during strick and post process, which decreases defects for plating process.

• 한국지리정보학회지
• /
• 제8권3호
• /
• pp.84-95
• /
• 2005

본 논문은 가시권역의 최대화를 만족하는 가시권 분석에 있어 지형요소가 어떻게 이용될 수 있으며 이러한 최적 다중 가시점 탐색 문제에 있어 지형요소의 이용이 얼마나 효과적인지를 살펴보는 연구이다. 이를 위하여 다양한 지형상태를 반영하는 지역의 DEM 자료와 각 DEM자료에 대한 지형요소 (peak, pass, pit)의 특정을 반영한 여섯 종류의 탐색방법을 제시하고 전통적인 공간 휴리스틱 (spatial heuristic)과의 비교 분석 (계산 시간과 총 가시권역 크기)을 통해서 지형요소를 이용한 방법의 효율성과 적용 가능성을 살펴보았다. 연구결과로써, 가시구역의 중복을 최소화하기 위해 제시된 버퍼링을 이용한 방법의 경우, 비록 공간 휴리스틱 방법에 비해 적은 가시구역 면적을 제시하였지만, 컴퓨팅 시간적인 측면에서 많은 이점을 제공하고 있음을 볼 수 있다. 또한 연구지역의 DEM상의 각각의 개별 그리드 셀을 대상으로 전체 DEM에 대해 계산된 가시구역을 이용한 방법의 경우, 비록 부가적인 계산 시간이 소요됨에도 불구하고 단순한 지형요소를 이용한 방법보다 향상된 분석 결과를 제시하였음을 알 수 있다.

• 한국표면공학회지
• /
• 제42권1호
• /
• pp.41-46
• /
• 2009

The fit between dental implant fixture and zirconia abutment is affected by many variables during the fabrication process by CAD/CAM program and milling working. The purpose of this study was to evaluate the surface compatibility and electrochemical behaviors of zirconia abutment for prosthodontics. Zirconia abutments were prepared and fabricated using zirconia block and milling machine. For stabilization of zirconia abutments, sintering was carried out at $1500^{\circ}F$ for 7 hrs. The specimens were cut and polished for gap observation. The gap between dental implant fixture and zirconia abutment was observed using field-emission scanning electron microscopy (FE-SEM). The hardness and corrosion resistance of zirconia abutments were observed with vickers hardness tester and potentiostat. The gap between dental implant fixture and zirconia abutment was $5{\sim}12{\mu}m$ for small gap, and $40{\sim}60{\mu}m$ for large gap. The hardness of zirconia surface was 1275.5 Hv and showed micro-machined scratch on the surface. The corrosion potentials of zirconia abutment/fixture was .290 mV and metal abutment/fixture was .280 mV, whereas $|E_{pit}-E_{corr}|$ of zirconia abutment/fixture (172 mV) was higher than that of metal abutment/fixture (150 mV). The corrosion morphology of metal abutment/fixture showed the many pit on the surface in compared with zirconia abutment/fixture.

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.265-275
• /
• 2012

Objectives: The aim of this study was to investigate the distribution patterns and exposure concentrations of biological hazards in waste handling industries. Methods: We selected 3 recyclable waste sorting plants(RWS), 2 food recycling plants(FR), 1 landfill area(LA) and 1 waste incineration plant(WI). Total airborne bacteria and fungi were measured with single stage impactor and gelatin filters. Endotoxin and glucan were measured with polycarbonate filters in total and respirable dust. Results: The geometric mean of airborne bacterial concentration was the highest in FR($3,273CFU/m^3$), followed by LA, RWS, and WI as 1,334, 934, and $860CFU/m^3$. The fungal concentrations were 6,031, 5,052, 3,307, and $713CFU/m^3$ in RWS, WI, FR, and LA, respectively. By process, WI pit showed the highest concentrations of bacteria, fungi, and endotoxin, followed by inside of bulldozer in LA. The indoor to outdoor ratios of bacteria, fungi, endotoxin and glucan were 2.3, 4.0, 2.3, and 5.0 in RWS, 29.5, 4.9, 7.6, and 5.0 in FR, 5.3, 8.7, 26.8, and 9.5 in WI, respectively. Conclusions: We found that biological hazards, specifically bacteria in FR, fungi in RWS and endotoxin in WI pit and bulldozer at LA, should be controlled to prevent worker's respiratory diseases.