• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.28-35
• /
• 2004

Driven pile has the excellent bearing characteristics and good economics, so it is known as the comparative piling method. To use the advantages of driven pile fully, it is necessary to perform the proper construction management. Engineers must drive pile to the proper bearing layer with proper blow energy and measure the blow count and penetration per certain depth to analyze the bearing capacity and driveability. In conventional method, these parameters have been measured manually so it was difficult to get good accuracy. After PIR-D(Pile Installation Recorder-Driven Pile) was attached to the driving equipment, the hammer efficiency, blow count and penetration in blow/10cm were measured automatically. In this paper, to givethe rational judgement criteria of bearing layer, driveability, blow/10cm according to pile depth during pile driving, the some relationship between the driving resistance and ground layer distribution was analyzed. The ground investigation during piles (PHC ${\Phi}450,\;{\Phi}400\;&\;Steel\;Pile\;{\Phi}609{\ast}16t$) installation in the marine clay layer in Incheon, the sandy soil layer in Yongin and the tuff layer in Pusan was done. And measuring hammer efficiency not doing recently, we could compare hammer efficiency(Eh) by PIR-D and energy transfer ratio(ETR) by Pile Dynamic Analyzer(PDA).

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.382-398
• /
• 2017

This study was conducted to identify the potential of Quercus mongolica (QUM), Pinus densiflora (PID) and Pinus rigida (PIR) as a raw material for pellet production. Larix kaempferi (LAK), which has mostly been used for pellet production in Korea, was also used as a control. All specimens contained very minimal amounts of sulfur and chlorine. Ash content of LAK was the lowest, followed by PID, PIR and QUM. For the size distribution, the mass fraction between 0.42 mm and 0.25 mm was the highest in PIR. Most fuel characteristics of the produced wood pellets improved with the use of 12% moisture content (MC) particles and the increase of the ratio of length to diameter of a hole in flat-die (L/D ratio). When the MC, bulk density and durability of QUM, PID, PIR and LAK pellets was compared with the standards of the KFRI and ISO, the use of wood particles of 12% MC and flat-die with an L/D ratio of 5.00 for PID particles are suitable for high-quality pellets in the aspects of all fuel characteristics. For PIR and QUM, further work is needed to seek the optimum conditions for the production of high-quality and durable pellets.

• Journal of Animal Science and Technology
• /
• 제55권6호
• /
• pp.539-543
• /
• 2013

Male cattle calves (n=24), 9-12 months age, with an average body weight of 120 {\pm} 20 kg were fed total mixed rations (TMR) for 120 days to determine their growth performance. Animals were divided into four groups (six of each breed): Crossbred (Friesian${\times}$Sahiwal), Dhanni, Lohani, and Cholistani. The data obtained were analyzed using analysis of variance techniques under a completely randomized design. The average daily gain (ADG), feed efficiency (FE), and dressing percentage ranged from 639-892 g/d, 0.105-0.155 kg/kg, and 51.2-51.5%, respectively, in the different breeds. The ADG and FE did not differ between the Crossbred, Dhanni, and Lohani breeds, but these values were lower in Cholistani calves (P<0.05). The dressing percentage was similar in all breeds. The highest increase in body height was observed in Dhanni calves, but heart girth was obviously higher in Lohani calves. The feed cost per kg gain was higher for Cholistani calves but similar among Crossbred, Dhanni, and Lohani calves (P>0.05). In conclusion, Dhanni, Lohani, and Crossbred calves possess the promising potential for beef production under the rainfed (Barani) conditions of the Punjab.

• Archives of Pharmacal Research
• /
• 제27권12호
• /
• pp.1216-1219
• /
• 2004

Spinoside, new coumaroyl flavone glycoside was isolated from the n-butanol fraction of the mathanolic extract of the whole plant of Amaranthus spinosus and assigned the structure 7-pcoumaroyl apigenin 4-O-${\beta}$ -D-glucopyranoside (1) on the basis of spectroscopic techniques including 1D and 2D NMR spectroscopy. In addition ${\alpha}$ - xylofuranosyl uracil (2), ${\beta}$ -D-ribofuranosyl adenine (3) and ${\beta}$ -sitosterol glucoside (4) have also been isolated for the first time from this species.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.60-65
• /
• 2018

The Internet of Things (IoT) is happening now. By implementing IoT, we can build smart home system. Smart home is an application that is a combination of technology and services that specialize in the home environment with specific functions aimed at improving the efficiency, comfort and security of the occupants. Smart homes filled with connected products are loaded with possibilities to make our lives easier, more convenient, and more comfortable. This intelligent home system uses a microcontroller to process functions that provided by smart home system, such functions as RFID for door access and PIR sensors for motion detection. By using Android users could control the sensors anytime and anywhere. Microcontroller used is Arduino IDE with WeMos D1R2 board. Based on the testing process, there was a successful communication between the components of the device, sensors, and Android devices. Users could open or close the solenoid, users can also turn off or turn on electronic devices using Android.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2021년도 추계학술발표대회
• /
• pp.167-169
• /
• 2021

본 논문에서는 아두이노와 라즈베리 파이를 기반으로 연동한 스마트 금고 시스템을 제안한다. 기존의 금고와 달리 보안성과 편리성의 취약점을 해결하도록 했다. 아두이노와 라즈베리 파이 기반의 다양한 센서를 이용해 스마트 금고의 보안성과 편리성을 높이도록 제안한다. 구현을 위해 지문인식 센서, RFID 센서, 키 패드, GPS, 충격감지 센서, 파이 카메라, PIR 센서를 사용한다. 또한, 스마트 금고 상태와 조작을 할 수 있는 어플리케이션을 제작해 편리성을 높이도록 했다. 금고 프로토 타입의 외부 재질은 3D 프린팅을 이용하여 제작을 했다.

• 한국통신학회논문지
• /
• 제37B권9호
• /
• pp.778-786
• /
• 2012

무선 센서네트워크에서 사용하는 센서는 PIR, 이미지, 전자파 센서와 같은 지향성 센서와 진동, 음향, 자기센서와 같은 비지향성 센서로 구분할 수 있다. 지향성 센서의 성능을 보장하기 위해서는 센서의 설치위치는 가시선이 보장되는 곳에 설치가 되어야 하므로 노드 설치 위치는 지표면보다 높은 곳에 설치가 된다. 비지향성 센서 중 진동센서의 경우 센서 특성상 지표면에 설치가 되어야 한다. 이로 인해 지표면에 설치되는 비지향성 센서는 통신 장애로 인하여 네트워크 연결성 문제가 발생한다. 본 논문에서는 센서 고유특성을 살려서 커버리지를 최대화하고, 센서노드의 설치높이를 고려한 토폴로지 구성을 통해 네트워크 연결성을 최대화할 수 있는 방법을 제안한다. 제안하는 방법은 비지향성 센서는 지표면에 배치하고, 지향성 센서는 나무나 폴대와 같은 물체를 이용하여 지상에 설치하여 센서 커버리지를 최대화 한다. 그리고 설치높이가 낮은 센서노드는 설치높이가 높은 센서노드에 우선 연결하고, 설치높이가 높은 센서노드는 설치높이가 높은 센서노드와 연결하는 토폴로지를 구성하여 네트워크 연결성을 최대화하는 것이다. 시뮬레이션을 통해 제안방법을 검증하였으며, 커버리지와 네트워크 연결성에서 성능이 향상됨을 확인하였다.

• 센서학회지
• /
• 제20권2호
• /
• pp.114-117
• /
• 2011

A thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated and then thin 1.6 ${\mu}m$ thickness P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated also. These thick and thin P(VDF/TrFE) film pyroelectric infrared ray sensor was mounted in TO-5 housing to detect infrared light of 5.5 ~ 14 ${\mu}m$ wavelength for human body detecting with each other. The noise output voltage of the thick P(VDF/TrFE) film pyroelectric infrared ray sensor were 380 mV and NEP(noise equivalent power) is $3.95{\times}10^{-7}$ W which is the similar value with the commercial pyroelectric infrared ray sensor using ceramic materials as a sensing material. The NEP and specific detectivity $D^*$ of the thin P(VDF/TrFE) film pyroelectric infrared ray sensor were $2.13{\times}10^{-8}$ W and $9.37{\times}106$ cm/W under emission energy of 13 ${\mu}W/cm^2$ respectively. These result caused by lower thermal diffusion coefficient of a thin 1.6 ${\mu}m$ thickness PVDF/TrFE film than the thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor.

• Journal of Ginseng Research
• /
• 제45권5호
• /
• pp.591-598
• /
• 2021

Background: Hematopoiesis is the production of blood cells from hematopoietic stem cells (HSCs) that reside in the bone marrow. Cyclophosphamide (CTX) is a chemotherapy drug that suppresses the immune system. Korean Red Ginseng (KRG) and Colla corii asini (CCA) have been traditionally used for boosting the immune system. Methods: HSCs in the bone marrow, and immune cell subtype in splenocytes, PBMCs, and thymocytes were investigated. Serum levels of hematopoietic-related markers were analyzed using ELISA. Protein expression in spleen tissue was analyzed using western blot analysis. Hematoxylin & eosin staining in the femurs of mice were also conducted. Results: The combination of KRG and CCA with a ratio of 3:2 increased HSCs, CD3 and CD8⁺ T cells in the circulation, and CD3 T cells in the spleen. A ratio of 2:3 (KRG:CCA) increased the thymic regulatory T cells and recovered the CD3 T cells in the spleen and circulation while recovering proteins in the JAK-STAT pathway in the spleen. Overall, blood cell population and differentiating factors vital for cell differentiation were also significantly recovered by all combinations especially in ratios of 3:2 and 2:3. Conclusion: A ratio of 3:2 (KRG:CCA) is the most ideal combination as it recovered the HSC population in the bone marrow of mice.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2000년도 International Symposium on Bioinformatics
• /
• pp.53-55
• /
• 2000

Xenie is the JAVA application software that integrates and represents 'gene to function'information of human gene. Xenie extracts data from several heterogeneous molecular biology databases and provides integrated information in human readable and machine usable way. We defined 7 semantic frame classes (Gene, Transcript, Polypeptide, Protein_complex, Isotype, Functional_object, and Cell) as a common schema for storing and integrating gene to function information and relationship. Each of 7 semantic frame classes has data fields that are supposed to store biological data like gene symbol, disease information, cofactors, and inhibitors, etc. By using these semantic classes, Xenie can show how many transcripts and polypeptide has been known and what the function of gene products is in General. In detail, Xenie provides functional information of given human gene in the fields of semantic objects that are storing integrated data from several databases (Brenda, GDB, Genecards, HGMD, HUGO, LocusLink, OMIM, PIR, and SWISS-PROT). Although Xenie provide fully readable form of XML document for human researchers, the main goal of Xenie system is providing integrated data for other bioinformatic application softwares. Technically, Xenie provides two kinds of output format. One is JAVA persistent object, the other is XML document, both of them have been known as the most favorite solution for data exchange. Additionally, UML designs of Xenie and DTD for 7 semantic frame classes are available for easy data binding to other bioinformatic application systems. Hopefully, Xenie's output can provide more detailed and integrated information in several bioinformatic systems like Gene chip, 2D gel, biopathway related systems. Furthermore, through data integration, Xenie can also make a way for other bioiformatic systems to ask 'function based query'that was originally impossible to be answered because of separatly stored data in heterogeneous databases.