• 전자공학회논문지 IE
• /
• 제47권3호
• /
• pp.26-34
• /
• 2010

본 논문에서는 기본적인 형태는 퍼지 제어의 형태를 유지하면서 그 세부적 요소들을 신경회로망으로 구성한 뉴로-퍼지 제어기를 설계하였다. 뉴로-퍼지 제어기는 퍼지 제어 및 신경회로망 제어가 갖는 장단점을 서로 보완할 수 있도록 하였으며 On-Line상태에서 동조가 이루어지도록 하였다. 본 제어기의 성능을 평가하기 위해서 현재 로봇제어에서 많이 사용되고 있는 교류 서보 전동기의 속도제어에 적용시켰다. 가장 보편적인 제어기인 PID제어기 및 퍼지제어기와 비교실험 함으로써 제어기로서의 안정한 특성을 입증하였다. 특히 로봇처럼 급격한 부하변동에 대응할 수 있는 제어기 설계를 위해 부하를 인가하여 실험을 수행하여 성능을 입증하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.395-401
• /
• 1999

In this paper, a temperature controller for a semiconductor test handler is proposed. First, a handware system for identification and control is established using RTD sensors, an A/D converter, solid state relays, a heater, and a computer system. Second, using ARMAX model and least square method, a chamber model for the design of a controller is identified through experiments. The identified model is verified to describe the real plant very well in the sense that it shows very similar input-output responses to those of the real system. With the identified model an LQG controller is designed. Frequency response of the designed controller shows that it has 15 dB of gainmargin and (-50˚, +50˚) of phase margin. Experiment with a real test handler demonstrates a good performance in the sense that its overshoot and steady state error are smaller and response time is faster, compared with those of a conventional PID controller.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.222-232
• /
• 2007

This paper presents the application of a single phase AC-to-DC converter using a three-phase series parallel (SPRC) resonant converter to variable speed dc-drive. The improved power quality converter gives the input power factor unity over a wide speed range, reduces the total harmonic distortion (THD) of ac input supply current, and makes very low ripples in the armature current and voltage waveform. This soft-switching converter not only possesses the advantages of achieving high switching frequencies with practically zero switching losses but also provides full ranges of voltage conversion and load variation. The proposed drive system is the most appropriate solution to preserve the present separately excited de motors in industry compared with the use of variable frequency ac drive technology. The simulation and experimental results are presented for variable load torque conditions. The variable frequency control scheme is implemented using a DSP- TMS320LF2402. This control reduces the switching losses and current ripples, eliminates the EMI and improves the efficiency of the drive system. Experimental results confirm the consistency of the proposed approach.

• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.31-40
• /
• 2014

This paper proposes a multi absorbing wave energy converter design, in which a hydrostatic transmission is used to transfer wave energy to electric energy. The most important feature of this system is its combination of the pressure coupling principle with the use of a hydraulic accumulator to eliminate the effects of wave power fluctuation; this maintains a constant speed of the hydraulic motor. Tilt motion of a floating buoy was employed as the power take-off mechanism. Furthermore, a PID controller was designed to carry out the speed control of the hydraulic motor. The design offers some advantages such as extending the life of the hydraulic components, increasing the amount of energy harvested, and stabilizing the output speed.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.1-10
• /
• 2022

Field robots operate in various areas, including construction, agriculture, forestry and manufacturing. Typical tasks of field robots used in various areas include excavation, flattening, and demolition. Such tasks are often accomplished in narrow alleys or indoors. In the case of field robots, there is a limit to working in a small space. Thus, to compensate for these shortcomings, many field robots equipped with Tiltrotators have recently been observed. The advantages of Tiltrotator are improved task efficiency and reduced operating time by reducing unnecessary behavior. We need simulation models that can improve the ability of new people to work and simulate tasks in advance. Thus, in this paper, we developed a simscape-based simulation model and modeling of 6DOF systems for field robots equipped with Tiltrotator. Dynamic modeling of field robot 3D models using Simcape multibody and hydraulic systems of field robots using Simcape Hydraulics were modeled. We applied a PID controller to create a control system that operates along the input angle. Simulation results show that errors occur when comparing input and output angles, but overall, they move along input angles.

• 수산해양기술연구
• /
• 제33권1호
• /
• pp.46-58
• /
• 1997

The energy saving is one of the most important factors for profit in marine transportation. In order to reduce the fuel oil consumtion the ship's propulsion efficiency must be increased as possible. The propulsion efficiency depends upon a combination of an engine and a propeller. The propeller has better efficiency as lower rotational speed. This situation led the engine manufacturers to design the engine that has low speed, long stroke and a small number of cylinders. Consequently, the variation of rotational torque became larger than before because of the longer delay-time in fuel oil injection process and an increased output per cylinder. As this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variation of the delay-time and the parameter perturbation. In this paper we consider the delay-time and the perturbation of engine parameters as the modeling uncetainties. Next we design the robust servo controller which has zero offset in steady state engine speed, based on H sub($\infty$) control theory. The validity of the controller was investigated through the response simulation. We used a personal computer and an analog computer as the digital controller and the engine (plant) part respectively. And, we could certify that the designed controller maintains its robust servo performance even though the engine parameters may vary.

• 대한한방부인과학회지
• /
• 제21권1호
• /
• pp.55-82
• /
• 2008

Purpose: In this study, we evaluated anti-inflammatory activity and anti-thrombosis effect of Manbunbang(MBB) prescribed to chronic PID patients. Methods: We studied inhibitory effect of platelet aggregation, suppression effect of GPIIb/IIIa activity and inhibitory effect of $TXB_2$ and $PGE_2$ biosynthesis which were caused by ADP, epinephrine, collagen and arachidonic acid in vitro. And suppression of pulmonary embolism, changes of related factors in dextran coagulation condition model and anti-oxidative effect of oxidative damage were studied in vivo. Results: MBB extract showed LD50 of $200\;{\mu}g/ml$ or higher in mouse lung fibroblast cells, and significantly decreased the GPT and GPT level in dextran coagulation condition model compared to the control. MBB extract showed dose-dependent inhibition effect on platelet coagulation induced by ADP, epinephrine, collagen, arachidonic acid. MBB extract showed dose-dependent inhibition effect on GPIIb/IIIa activities compared to the control. MBB extract significantly suppressed TXB2 and PGE2 biosynthesis compared to the control. MBB extract suppressed pulmonary embolism triggered by collagen and epinephrine by 37.5% compared to the control. MBB extract significantly suppressed the decrease of speed of bloodstream caused by blood coagulation in dextran coagulation condition model compared to the control. Concluson : The results strongly suggest the anti-inflammatory activity of Manbunbang through anti-thrombus. Various applications using Manbunbang on inflammatory diseases are anticipated. Anti-oxidative efficacy comparison data between the Manbunbang prescription and the drug compositions may be used as important clinical information, and further investigation of anti-oxidative activities of Chrysanthemum indicum and Rhemaniae Radix should be followed.

• 한국항해항만학회지
• /
• 제33권6호
• /
• pp.387-393
• /
• 2009

본 연구에서는 수중청소로봇의 추종 성능과 통합 제어시스템 성능을 가시적으로 예측할 수 있는 3차원 시뮬레이터를 개발하였다. 수중청소로봇의 동역학적 해석을 기반으로, 시뮬레이터에는 실제 개발 중인 3차원형상의 수중청소로봇을 적용하고 로봇의 위치와 속도 등을 나타내는 창을 표시하였다. 또한 조이스틱을 사용하는 입력 및 제어 장치를 직접 제작하여 시리얼 통신을 통하여 시뮬레이터의 입력 및 제어에 사용하였다. 그리고 통합 항법 제어시스템을 설계하고, PI 기반의 퍼지 제어기를 포함하는 way-point tracking 시뮬레이션을 통하여 성능을 검증하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.229-234
• /
• 2008

The new millennium has started with several innovations driven by fast evolution of the technologies in energy sector. A strong impulse towards the diffusion of new economical efficient technologies regulatory incentives related to energy production from renewable source and a small scale building trigeneration and to promotion of more sustainable environmental-friendly generation solutions, the evolution of electricity markets, more and more binding local emission constraints, and the need for improving the security of supply to reduce the energy system vulnerability. The 24 percentage energy quantify of total energy consumption consumes in commercial buildings and residential houses and the 30% portion of total $CO_2$ emissions covers also in the commercial buildings and residential houses sector. To cope with efficiently this energy sinuation in building sector, Building microgrid or building tooling, heating & power(BCHP) system has been interested in recent day due to meeting thermal and electric energy requirements efficiently and with appropriate energy quality. A multi agent system is a collective of intelligent agents that communicate with each other and work cooperatively to achieve common goals. Also, it is to medicate and coordinate communication between Control Areas and Security Coordinators for teal-time control of the BCHP system and the power pid. In this new circumstance, it is very important to integrate the power and energy delivery system and the information system(communication, networks, and intelligent equipment) that controls it. Therefore, development of smart control modules with open communication protocol and seamlessly interchange the data and information between control network and data network including extranet and intranet give a great meanings. We designed and developed the TCP/IP-CAN IED agent modules and ModBus./LonTalk/(TCP/IP) IED agent ones to configure the multi-agent system based smart energy network of commercial buildings and also intelligent algorithms for inverter fault diagnostics which ran be operated in control level or agent level network.

• 한국철도학회논문집
• /
• 제18권1호
• /
• pp.15-24
• /
• 2015

상전도흡인식 자기부상열차는 전자석의 전류를 조정하여 차량과 선로 사이의 간극(공극)을 일정하게 유지한다. 이러한 능동현가장치를 사용하는 자기부상열차에 있어서는 다양한 외란에도 불구하고 부상제어기를 이용한 부상공극을 허용하는 범위 내로 유지하는 것이 핵심기술 중의 하나이다. 특히 차량과 유연한 가이드웨이 사이의 동적상호작용에 의해 발생되는 진동은 저속 및 정지상태에서 부상안정성을 방해하는 중요한 요인으로 작용한다. 본 논문에서는 가이드웨이의 유연성에도 강인한 부상제어기를 개발하기 위하여 차량과 유연 가이드웨이 사이의 연성 동역학 모델을 개발하고, 전자석 및 부상제어기도 포함시키는 통합모델링을 제안하였다. 개발된 통합동역학 모델을 이용하여 가이드웨이의 유연성을 고려한 부상공극 시뮬레이션을 수행하였다.