• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.867-872
• /
• 2013

Many practical processes in industry have nonlinearities of some forms. One commonly encountered form is actuator saturation which can cause a detrimental effect known as integrator windup. Therefore, a strategy of attenuating the effects of integrator windup is required to guarantee the stability and performance of the overall control system. In this paper, optimal tuning of a PID (Proportional-Integral-Derivative) controller with an anti-windup scheme is presented to enhance the tracking performance of the PID control system in the presence of the actuator saturation. First, we investigate effective anti-windup schemes. Then, the parameters of both the PID controller and the anti-windup scheme are optimally tuned by an EA (Evolutionary Algorithm) such as the IAE (Integral of Absolute Error) is minimized. A set of simulation works on two high-order processes demonstrates the benefit of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제13권12호
• /
• pp.1153-1159
• /
• 2007

This paper presents the hardware implementation of nonlinear PID controllers for the ROBOKER humanoid robot arms. To design the nonlinear PID controller on an FPGA chip, nonlinear functions as well as the conventional PID control algorithm have to be implemented by the hardware description language. Therefore, nonlinear functions such as trigonometric or exponential functions are designed on an FPGA chip. Simulation studies of the position control of humanoid arms are conducted and results are compared. Superior performances by the nonlinear PID controllers are confirmed when disturbances are present. Experiments of humanoid robot arm control tasks are conducted to confirm the performance of our hardware design and the simulation results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.691-696
• /
• 2002

This paper presents a neural network based self-tuning fuzzy PID control scheme with variable learning rate for induction motor speed control. When induction motor is continuously used long time, its electrical and mechanical Parameters will change, which degrade the Performance of PID controller considerably. This Paper re-analyzes the fuzzy controller as conventional PID controller structure, introduces a single neuron with a back-propagation learning algorithm to tune the control parameters, and proposes a variable learning rate to improve the control performance. Proposed scheme is simple in structure and computational burden is small. The simulation using Matlab/Simulink and the experiment using dSPACE(DS1102) board are performed to verify the effectiveness of the proposed scheme.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.348-354
• /
• 1999

본 논문에서는 산업 현장에서 일반적으로 많이 사용되고 있는 PID 제어기의 비례, 적분, 미분 파라미터를 다층 신경회로망을 이용하여 자동으로 동조하는 방법을 제안한다. 제안한 방식은 자기 궤환 뉴런을 가진 다층 신경회로망이 플랜트의 입력과 출력을 이용하여 PID 제어기의 파라미터들을 학습에 의하여 자동 동조한다. 다층 신경회로망은 자기 궤환 뉴런을 이용하여 입력층, 은닉층, 출력층의 3층으로 구성하고, 출력은 3개의 값을 갖는다. 이것은 PID 제어기의 비례(P), 적분(I), 미분(D) 파라미터로 사용된다. 이 값들은 특정한 값으로 고정되는 것이 아니라 제어 수행 과정 중에서도 다층 신경회로망의 학습에 의해 계속 변화된다. DC 서보 모터와 단일 관절 매니퓰레이터를 대상으로 시뮬레이션을 통해서 제안한 방식의 유용성을 확인한다.

• 산업기술연구
• /
• 제20권B호
• /
• pp.155-162
• /
• 2000

Although Fuzzy Logic Controller(FLC) adopted three terms as input gives better performance, FLC is in general composed of two-term control because of the difficulty in the construction of fuzzy rule base. In this paper, a three-term FLC which is similar to PID control but acts as a nonlinear controller is proposed. To reduce the complexity of the rule base design and to increase efficiency. a simplified fuzzy PID control is induced from a hybrid velocity/position type PID algorithm by sharing a common rule base for both fuzzy PI and fuzzy PD parts. It is simple in structure, easy in implementation, and fast in calculation. The phase plane technique is applied to obtain the rule base for fuzzy two-term control and the resultant rule base is Macvicar-Whelan type. And the membership function is a Gaussian function. The frequency response information is used in tuning of the membership functions. Also a tuning strategy for the scaling factors is proposed based on the relationship between PID gain and the scaling factors. Simulation results show better performance and the effectiveness of the proposed method.

• 전기전자학회논문지
• /
• 제3권1호
• /
• pp.109-117
• /
• 1999

본 논문에서는 급속 열처리 공정에서 필수적인 빠르고 정밀한 웨이퍼의 온도제어기법을 제안하였다. Bang- Bang/PID 제어기법은 빠른 온도상승률을 만족하고, 오버슈트와 정상상태 오차를 줄이도록 한다. 즉 초기에 허용 가능한 최대전력을 공급하는 일종의 Bang-Bang 방식의 제어를 하고, 설정온도와 출력에서 측정되는 온도와의 차이가 어느 정해진 범위보다 작을 때 PID 제어를 수행한다. 또한 PID 이득을 정하기 위해 ARX 모델로 식별된 플랜트에 Kappa-Tau 동조법이 사용되었다. 개발된 제어기는 실험용 RTP 장비에 적용하여 그 성능을 평가하였다.

• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.39-43
• /
• 2016

본 논문은 조향구조를 갖는 이동로봇의 조향 제어를 위해 PID 제어기의 이득을 튜닝 방법을 제안한다. PID 이득을 설정하는 다양한 방법들이 제시되고 연구되고 있다. 이득은 지글러-니콜스의 계단형 입력으로부터 이득을 얻는 방법으로 얻어진 이득을 이동로봇에 적용하고 이를 시험하여 다시 2차 전달함수에 의해 새로운 이득을 계산하였다. 얻어진 새로운 이득으로 응답시간 및 유지오차율에 관한 실험을 수행하여 PID 자동 튜닝의 성능을 확인하였다. 유지시간, 응답시간 및 수렴시간에 대한 실험결과로 이동로봇의 조향 시스템에서 사용이 가능하고 응답 시간이 빠르게 도달할 수 있으며 안정하게 제어됨을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.608-613
• /
• 2004

This paper is concerned with the design of a predictive PID controller, which has similar features to the model-based predictive controller. A PID type control structure is defined which includes prediction of the outputs and the recalculation of new set points using the future set point data. The optimal values of the PID gains are pre-calculated using the values of gains calculated from an unconstrained generalized predictive control algorithm. Simulation studies demonstrate the performance of the proposed controller and the results are compared with generalized predictive controller and the results are compared with generalized predictive control solutions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.151-154
• /
• 2000

Used analog control systems have been converted into digital control systems due to performance degradation and difficulty of maintenance. There are few domestic DCS (Distribued Control System)s that have been applied to Bower plant. To apply a demestic DCS to power plant, the reliability, redundacny, and fault tolerance of DCS is important. Besides those items, the control action of control function block is also important. In this paper, we describe the requirements that PID control function block has to have, and implement a PID control function block that satisfies those requirements. Finally. simulation result using digital simulator for boiler system in thermal power plant shows the validity of a implemented PID control function block.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.465-468
• /
• 1998

In this paper, merits of both fuzzy and PID controllers are combined. The combined controller is designed such that the tuning of the PID controller is achieved by the basic fuzzy controller via its rule base. The proposed scheme avoids the tuning of PID parameters which is always a time consuming task, difficult to carry out and often poorly done. Computer simulations are made to demonstrate the satisfactory tracking performance of the combined fuzzy-PID controller.