• Title/Summary/Keyword: PH

Search Result 1,902, Processing Time 0.061 seconds

Effect of NMDA Receptor Antagonist on Local Cerebral Glucose Metabolic Rate in Focal Cerebral Ischemia (국소뇌허혈에서 NMDA 수용체 길항제가 국소 뇌포도당 대사율에 미치는 영향)

  • Kim, Sang-Eun;Hong, Seung-Bong;Yoon, Byung-Woo;Bae, Sang-Kyun;Choi, Chang-Woon;Lee, Dong-Soo;Chung, June-Key;Roh, Jae-Kyu;Lee, Myung-Chul;Koh, Chang-Soon
    • The Korean Journal of Nuclear Medicine
    • /
    • v.29 no.3
    • /
    • pp.294-306
    • /
    • 1995
  • There has recently been increasing interest in the use of NMDA receptor antagonists as potential neuroprotective agents for the treatment of ischemic stroke. To evaluate the neuroprotective effect of the selective non-competitive NMDA receptor antagonist MK-801 in focal cerebral ischemia, local cerebral glucose utilization (ICGU) was examined in 15 neuroanatomically discrete regions of the conscious rat brain using the 2-deoxy-D[$^{14}C$] glucose quantitative autoradiographic technique 24 hr after left middle cerebral artery occlusion (MCAO). Animals received MK-801 (5 mg/kg i.v.) or saline vehicle before (20-30 min) or after (30 min) MCAO. Both pretreatment and posttreatment of MK-801 increased occluded/non-occluded ICGU ratio in 7 and 5 of the 15 regions measured, respectively (most notably in cortical structures). Following MK-801 pretreatment, there was evidence of widespread increases in ICGU not only in the non-occluded hemisphere (12 of the 15 areas studied) but also in the occluded hemisphere (13 of the 15 areas studied), while MK-801 postreatment did not significantly increase ICGU both in the normal and occluded hemispheres. These data indicate that MK-801 has a neuroprotective effect in focal cerebral ischemia and demonstrate that MK-801 provides widespread alterations of glucose utilization in conscious animals.

  • PDF

Preparation of Polystyrene Beads by Suspension Polymerization with Hydrophobic Silica as a Stabilizer in Aqueous Solution (소수성 실리카를 안정제로 이용하는 수용액 상에서의 현탁중합법에 의한 폴리스티렌 입자 합성)

  • Park, Moon-Soo
    • Polymer(Korea)
    • /
    • v.30 no.6
    • /
    • pp.498-504
    • /
    • 2006
  • A suspension polymerization of styrene In aqueous phase was employed to study if polystyrene particles ranging from 1 to $20{\mu}m$ can be produced. Hydrophobic silica was selected as a stabilizer and azo-bisisobutyronitrile (AIBN) as an initiator. Polymerization reaction was carried out at a selected temperature in the range of $65{\sim}95^{\circ}C$. Stabilizer concentration was varied from 0.17 to 3.33 wt% compared to the water while the concentration of the initiator was raised from 0.13 to 6.0 wt% compared to the monomer. Dispersion of hydrophobic silica into the water phase was achieved by precise control of pH. Optimum dispersion of silica was obtained at pH 10. Average particle diameter decreased with increasing amounts of stabilizer concentration initially, exhibiting the minimum average diameter at 1.67 wt% of stabilizer concentration, after which it started to Increase. It is speculated that an excessive presence of stabilizer encouraged a secondary reaction in the reaction medium, which led to particle agglomeration, and as a result an increase in average particle diameter. Molecular weight was found to be independent of stabilizer concentration between 0.13 and 1.00 wt% whereas, it increased when stabilizer concentration exceeded 1.67 wt%. Variation of molecular weight was probably caused by the reduced activity and efficiency of initiator due to the high concentration of silica, and the secondary reaction in the reaction medium, as well. An increase in the Initiator concentration and/or reaction temperature resulted in an increase in both reaction rate and particle diameter. Consequently, we have confirmed that spherical polystyrene particles with $1{\sim}20{\mu}m$ in diameter can be prepared by careful selection of the concentration of stabilizer, initiator, pH and reaction temperature.

Changes of Physicochemical Properties of Conjugated Linoleic Acid(CLA) Accumulated Pork during Storage Time (Conjugated Linoleic Acid(CLA)가 축적된 돈육의 저장기간중 이화학적 특성변화)

  • 이정일;정재두;이진우;이제룡;정진연;양한술;주선태
    • Food Science of Animal Resources
    • /
    • v.23 no.3
    • /
    • pp.236-249
    • /
    • 2003
  • To investigate the effects of dietary conjugated linoleic acid 011 changes of physicochemical properties of pork. Twenty pigs were divided into 5 treatment groups and subjected to each experimental diet(0, 1.25% and 2.5% CLA for 2 weeks, 1.25% and 2.5% CLA for 4 weeks, as total fed diet before slaughtering(about 110 kg). Pork loin samples were aerobically packed and stored for 14 days at 4$^{\circ}C$. Samples were then analyzed for general compositions, physicochemical characteristics and sensory evaluation. pH value of CLA fed group pork was significantly increased than that of control group(p<0.05). Crude fat content of CLA treated group pork was significantly higher than the control pork(p<0.05), but there were no significant differences in crude protein, crude ash and total moisture contents between control and CLA treated groups. AU CLA fed group pork showed higher WHC value than control pork. Drip loss was significantly lower compared to those of control porks. No significant differences in lean meat and fat color(CIE L*, a*, b*) were observed between control and the CLA treated group porks. Meanwhile, CLA pork tended to be lower in content of total heme pigment compared to control pork. No remarkable differences were found in sensory properties(color and drip loss) among control and CLA diet-fed group porks. Marbling score and acceptability were significantly increased in CLA diet-fed pork compared to the control pork.

Characteristics of Electrode Potential and AC Impendance of Perchlorate Ion-Selective Electrodes Based on Quaternary Phosphonium Salts in PVC Membranes (제4급 인산염을 이용한 과염소산 이온선택성 PVC막 전극의 전극전위와 AC 임피던스 특성)

  • 안형환
    • Membrane Journal
    • /
    • v.9 no.4
    • /
    • pp.230-239
    • /
    • 1999
  • Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.

  • PDF

Behavior of Cadmium, Zinc, and Copper in soils -I. Effect of Organic Matter Treatment on Adsorption of Cadmium, Zinc, and Copper in soils- (토양내(土壤內) 카드뮴, 아연(亞鉛) 및 구리의 행동(行動)에 관한 연구(硏究) -제2보(第-報). 토양내(土壤內) 카드뮴, 아연(亞鉛) 및 구리의 흡착(吸着)에 미치는 유기물처리(有機物處理)의 영향(影響)-)

  • Yoo, Sun-Ho;Hyun, Hae-Nam
    • Applied Biological Chemistry
    • /
    • v.28 no.2
    • /
    • pp.68-75
    • /
    • 1985
  • Laboratory experiments were conducted to investigate the effect of compost and humic acid treatment on adsorption of Cd, Zn, and Cu in soils. Three soils differing in physical and chemical properties used in this experiments were Bonyrang (Typic Udifluvents) SL, Gangseo (Aquatic Eutrochrepts) L, and Gyorae (Typic Distrandepts) SiL. Adsorption of Cd, Zn, ana Cu on the soils followed Langmuir isotherm up to 75 ppm of initial concentration. The adsorption maxima of Cd, Zn, and Cu for the Bonryang soil, the lowest in pH, organic matter content, and CEC, were the lowest of the three soils. Although the Gyorae soil derived from volcanic ash was the highest in organic matter content and CEC, the adsorption maxima of heavy metals for the Gyorae soil were lower than those for the Gangseo soil of which organic content and CEC were intermidiate. The adsorption maxima/CEC ratios for the Bonryang, the Gangseo, the Gyorae soils were found to be in the range of $23{\sim}27%,\;28{\sim}57%$, and $11{\sim}14%$ respectively The bonding energy constants of Cd, Zn, and Cu for the soils were in the order of Gangseo>Bonryang>Gyorae soils. The adsorption maxima of Cd, Zu, and Cu for the Bonryang soil increased with compost treatment by $100{\sim}210%,\;90{\sim}230%$, and $130{\sim}290%$ respectively, while little difference was observed when the soil was treated with humic acid Bonding energy constants of Cd, Zn, and Cu for the Bonryang soil increased significantly with compost treatment, and showed insignificant correlation with humic acid treatment.

  • PDF

THE CHANGE OF THE CONFIGURATION OF HYDROXYAPATITE CRYSTALS IN ENAMEL BY CHANGES OF PH AND DEGREE OF SATURATION OF LACTIC ACID BUFFER SOLUTION (유산 완충용액의 pH 및 포화도 변화에 따른 법랑질 내 수산화인회석 결정 형태의 변화)

  • Chon, Young-Eui;Jung, Il-Young;Roh, Bung-Duk;Lee, Chan-Young
    • Restorative Dentistry and Endodontics
    • /
    • v.32 no.6
    • /
    • pp.498-513
    • /
    • 2007
  • Since it was reported that incipient enamel caries can be recovered, previous studies have quantitatively evaluated that enamel artificial caries have been, remineralized with fluoride showing simultaneously the increase of width of surface layer and the decrease of width of the body of legion. There is, however, little report which showed that remineralization could occur without fluoride. In addition, the observations on the change of hydroxyapatite crystals also have been scarcely seen. In this study, enamel caries in intact premolars or molars was induced by using lactic acidulated buffering solutions over 2 days. Then decalcified specimens were remineralized by seven groups of solutions using different degree of saturation(0.212, 0.239, 0.301, 0.355) and different pH(5.0, 5.5, 6.0) over 10 days. A qualitative comparison to changes of hydroxyapatite crystals after fracturing teeth was made under SEM(scanning electron microscopy) and AFM(atomic force microscopy). The results were as follows: 1. The size of hydroxyapatite crystals in demineralized area was smaller than the normal ones. While the space among crystals was expanded, it was observed that crystals are arranged irregularly. 2. In remineralized enamel area, the enlarged crystals with various shape were observed when the crystals were fused and new small crystals in intercrystalline spaces were deposited. 3. Group 3 and 4 with higher degree of saturation at same pH showed the formation of large clusters by aggregation of small crystals from the surface layer to the lesion body than group 1 and 2 with relatively low degree of saturation at same pH did. Especially group 4 showed complete remineralization to the body of lesions. Group 5 and 6 with lower pH at similar degree of saturation showed remineralization to the body of lesions while group 7 didn't show it. Unlike in Group 3 and 4, Group 5 and 6 showed that each particle was densely distributed with clear appearance rather than crystals form clusters together.

반응표면분석에 의한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성 변화

  • 이용욱;금준석;은종방
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.167.2-168
    • /
    • 2003
  • 현대 사회는 서구적인 식생활의 변화로 인해 조리가 간편하고 조리 시간이 짧은 즉석식품과 영양 기호식품을 동시에 충족시켜주는 음식에 대한 소비가 늘고 있는 실정이다. 또한 최근 미곡의 공급량에 비해서 소비량이 해마다 감소하여 재고미의 증가를 볼 때, 쌀의 새로운 이용방법 모색이 절실히 요망된다. 따라서 쌀의 소비촉진과 현대사회의 소비형태를 접목시켜서 쇠고기와 야채를 이용한 즉석쌀죽을 개발하고자 하였다. 쇠고기, 야채 및 쌀가루를 이용한 soup mix의 최적 배합비를 설정하기 위하여 제조조건에 따라 다르게 제조한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성에 미치는 변화를 조사하였다. 이때 야채의 배합비에 따른 이화학적 및 관능적 특성을 모니터링 하고자 반응표면분석법 (response surface methodology, RSM)을 이용하였다. 요인변수(Xn)를 쌀의 양에 대한 버섯의 비율 (X$_1$), 당근의 비율 (X$_2$), 대파의 비율 (X$_3$)로 하여 중심합성계획에 따라 17실험구로 구분하여 조리실험을 실시하였고, 반응변수(Yn)는 soup mix를 이용하여 제조한 쇠고기 야채 쌀죽의 이화학적 특성인 색도의 L*값 (Y$_1$), a*값 (Y$_2$), b*값 (Y$_3$), 점도(Y$_4$), 퍼짐성 (Y$_{5}$), 고형분 함량(Y$_{6}$), PH (Y$_{7}$)으로 하였으며 관능적 특성인 색 (Y$_{8}$), 향 (Y$_{9}$), 점성 (Y$_{10}$), 맛 (Y$_{11}$), 전체적인 기호도 (Y$_{12}$)를 종속변수로 하여 회귀분석에 이용하였다. 회귀분석에 의한 모델식의 예측에는 SAS (statistical analysis system)program을 사용하였으며, 3차원 반응표면 분석법으로 해석하였다. 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 물리적 특성인 색도의 L*, a*, b* 값에 대한 반응표면 회귀식의 $R^2$은 각각 0.6098(p> 0.05), 0.8803 (p <0.05), 0.6781(p> 0.05)로서 b값에 있어서 그 유의성이 5%수준에서 인정되어 b값에 미치는 영향이 크다는 것을 알 수 있었다. L*값은 63-68사이로, a*값은 0.13에서 -0.89사이를 b*값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p <0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.0344 (p <0.05)임을 볼 때, 설정된 범위내에서 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 맛과 기호도에 큰 영향을 미치는 것을 알 수 있었다. 그리고 최대 임계점이 버섯의 첨가량은 0.99%, 당근의 첨가량은 0.97%, 대파의 첨가량은 0.59%에서 최적 반응표면을 나타내었다. 이상의 결과로 볼 때, 야채의 배합비에 따른 맛과 전체적인 기호도에 있어서 그 유의성이 5%수준에서 모두 유의한 상관관계를 보였으며, soup mix 제조시 쌀가루 양에 대한 야채의 최적 배합비는 버섯, 당근, 대파에 있어서 각각 0.99, 0.97과 0.59%임을 알 수 있었다.

  • PDF

Some Properties of the Polyphenol Oxidase from Potatoes (Solanum tubersum L.) and Inhibiting Effect of the Polyphenol Oxidase by Sulfites (감자 Polyphenol Oxidase의 효소학적 성질 및 아황산염에 의한 활성억제 효과)

  • Ha, Young-Duk;Lee, Mi-Ock
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.17 no.3
    • /
    • pp.198-204
    • /
    • 1988
  • This study was aimed at obtaining elementary data on enzymatic browning of potato and potato products and examining the inhibitory method of browning. Therefore, we extracted polyphenol oxidase from potatoes(Solanum tubersum L.), and investigates its general properties and inhibiting effects of its activity with the different concentrations of sulfites($Na_2S_2O_4,\;Na_2SO_3{\cdot}7H_2O,\;NaHSO_3$). The optimum pH and temperature of polyphenol oxidase were observed to be 6.5 and $37^{\circ}C$ respectively. The polyphenol oxidase at PH5 was very stable, and the activity of polyphenol oxidase between pH $5.0{\sim}9.0$ was estimated to be relatively high, showing $72{\sim}75%$ of its activity at pH5. The polyphenol oxidase was very stable when heated at $40^{\circ}C$ for one hour, and almost 50% of enzyme activity was decreased when heated at $70^{\circ}C$ for twelve minutes. At 0.1mM concentrating of sulfites the relative activity of polyphenol oxidase was 98% in all the three cases of sulfites. Thus sulfites at 0.1mM concentration was found to have little inhibiting effect on polyphenol oxidase activity. At 1mM concentration of sulfites $NaHSO_3$ showed the lowest 36% relative activity among the three. At 5mM concentration of sulfites, the relative activity of $Na_2SO_3{\cdot}7H_2O$ was the lowest 14%.

  • PDF

Numerical Approach for Evaluation of Forest Soil Fertility (수치적(數値的) 접근방법(接近方法)에 의(依)한 산림토양(山林土壤)의 비옥도(肥沃度) 평가(評價))

  • Ma, Sang Kyu
    • Journal of Korean Society of Forest Science
    • /
    • v.35 no.1
    • /
    • pp.1-8
    • /
    • 1977
  • Forest soil fertility was evaluated through the approach of numerical method. In this study, the soil chemical properties analyzed for 35 different soil series as table 2 were cited in numerical analysis. Minimum contents of essential nutrients in the surface soil for a satisfactory growth of tree in the plantation were evaluated by comparing with Wild's standard as table 1. Demanding level of fertilization were evaluated by using the formula 1 as table 5. Similar relation of soil chemical properties between soil series were calculated through formula 2, and then classified into 5 groups in soil chemical properties. 1. General chemical properties of surface soil in case of 35 soil series. About 40 percent of 35 different soil series are less than 2 percent in organic matter, 10 ppm in available phosphorus, 1.25m.e/l00g in exchangeable calcium and 0.5m.e/l00g in exchangeable magnesium. Generally, shortage of exchangeable potash are not found. CEC less than 10m.e/l00g are in two thirds and strong acid soil less than PH 5.5 are in about four fifths. 2. Soil series requested or not the fertilization are indirectly evaluated from the formula 1 using the relative figure of chemical components of CEC, OM and MgO. Through this analysis, 8 different soil series have very poor quality in soil chemical capacity so that demands highly the fertilization. On the other hand, other 13 different soil series group have not been thought to need the fertilization according to chemical guality. 3. By the results comparing the similarity of chemical properties of forest soil, it is thought to be suitable that the forest soil fertility are divided into 5 groups as follows: 1. Low CEC soil 1-1 Low organic matter soil less than 2 percent 1-2 Medium organic matter soil less than 4 percent 2. High CEC and organic matter soil 2-1 Low magnesium soil 2-2 High magnesium soil 3. High magnesium and calcium soil as lime stone.

  • PDF

Synthesis and Electrochemical Properties of (La0.6Sr0.4)(Co0.2Fe0.8)O3 cathode for SOFC on pH Control Using Modified Oxalate Method (Modified Oxalate Method 의해 합성한 SOFC용(La0.6Sr0.4)(Co0.2Fe0.8)O3 Cathode의 pH 변화에 따른 특성)

  • Lee, Mi-Jai;Choi, Byung-Hyun;Kim, Sei-Ki;Park, Sang-Sun;Lee, Kyung-Hee
    • Journal of the Korean Electrochemical Society
    • /
    • v.10 no.4
    • /
    • pp.288-294
    • /
    • 2007
  • The LSCF cathode far Solid Oxide Fuel Cell was investigated to develop high performance unit cell at intermediate temperature by modified oxalate method with different electrolytes and different pH. The LSCF powders employed La, Sr, Co and Fe oxides, oxalic acid, ethanol and $NH_4OH$ solution were synthesized with pH controlled as 2, 6, 7, 8, 9 and 10 at $80^{\circ}C$ Single crystalline phase was obtained from pH $2{\sim}9$. on the other hand, $La_2O_3$ appeared from pH 10. Very fine powder with particle size of 50 nm was obtained at calcination temperature of $800^{\circ}C$ for 4 hours. LSCF cathode synthesized at pH 7 showed the highest electric conductivity in the temperature range of $600^{\circ}C$ to $900^{\circ}C$ its value was 950 S/cm at $900^{\circ}C$ Under same synthesis conditions, polarization resistance of each LSCF cathode was changed with different calcination temperatures. As-prepared powder presented 2.52, 1.54 and $2.58\;{\Omega}$ at $600^{\circ}C$ with ScSZ, 8Y-YSZ and GDC as its electrolyte respectively after calcination at $800^{\circ}C$ for 4 hours.