• The Korean Journal of Food And Nutrition
• /
• v.9 no.1
• /
• pp.21-28
• /
• 1996

This study was attempted to investigate the production of L-tyrosine by Brevibacterium flavum ATCC 14067. To select the strain which produce more L-tyrosine, mutants were induced by N-methyl-N'-nitro-nitrosoguanidine (NTG) treatment and phenylalanine auxotrophic mutants were induced by NTG and penicillin treatments. PFP resistant mutant was isolated from a phenylalanine auxotroph by retreatment with NTG and screened for increase of L-tyrosine production. PFP-326 mutant resistant to PPP (100ug/ml) was derived from phenylalanine auxotroph by mutagenesis with NTG and PFP-106 mutant resistant to PFP (1201g/ml) was derived from PFP-326 by mutagenesis with NTG. The composition of media for L-tyrosine production in strain PFP-106 was studied. PFP-106 mutant strain produced 50mg 11 of L-tyrosine while the parent strain produced 0.56mg 11 of L-tyrosine. The optimum composition of medium for L-tyrosine by strain PFP-106 was 10cA sucrose as carbon source, 3% ammonium sulfate as nitrogen source. The optimum cultural condition for producing L-tyrosine by strain PFP-106 was L-phenylalanine at a concentration of 1000g/mg.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.2
• /
• pp.69-74
• /
• 2001

Calli were induced on MS medium supplemented with 0.5 mg/L 2,4-D by using the leaf explants of haploid which were derived from the diploid and haploid of Nicotiana tabacum cv BY4. These calli were subcultured on MS medium with the combination of 2.0 mg/L 2,4-D, 1.0 mg/L kinetin and 0.1 mg/L BAP. Cell propagation of diploid plants were good in a combination of 2.0 mg/L 2,4-D, 0.1mg/L BAP in vitro conditions, suspension cultures were conducted in equal condition. Homogenized suspension cultured cells were smeared 2.0 mL each on MS medium with 0~100 $\mu$M PFP, to select the resistant colony to PFP, and were examined after 10d, 20d and 30d. Measurment of fresh weight of cells after 30d of culture shows that with more concentration of PFP in medium the fresh weight of the cells decreased. In case of diploid, selected callus was the highest in vitro treated with 5 $\mu$M PFP. It was higher than control until 100 $\mu$M PFP. The active degree of catalase was the highest in vitro with 5 $\mu$M PFP but the lowest in vitro with 10 $\mu$M PFP on the other hand, in case of haploid plant, the active degree of peroxidase and catalase was the highest in vitro treated with 50 $\mu$M PFP. It's sure that enzyme active degree of between diploid and haploid had big differences.

• Physical Therapy Korea
• /
• v.28 no.4
• /
• pp.266-272
• /
• 2021

Background: Considering the kinetic chain of the lower extremity, a pronated foot position (PFP) can affect malalignment of the lower extremity, such as a dynamic knee valgus (DKV). Although the DKV during several single-leg movement tests has been investigated, no studies have compared the differences in DKV during a single-leg step down (SLSD) between subjects with and without PFP. Objects: The purpose of this study was to compare the DKV during SLSD between subjects with and without PFP. Methods: Twelve subjects with PFP (9 men, 3 women) and 15 subjects without PFP (12 men, 3 women) participated in this study. To calculate the DKV, frontal plane projection angle (FPPA), knee-in distance (KID), and hip-out distance (HOD) during SLSD were analyzed by two-dimensional video analysis software (Kinovea). Results: The FPPA was significantly lower in PFP group, compared with control group (166.4° ± 7.5° and 174.5° ± 5.5°, p < 0.05). Also, the KID was significantly greater in PFP group, compared with control group (12.7 ± 3.9 cm and 7.3 ± 2.4 cm, p < 0.05). However, the HOD not significantly differed between two groups (12.7 ± 1.7 cm and 11.4 ± 2.5 cm, p > 0.05). Conclusion: The PFP is associated with lower FPPA and greater KID. When assess the DKV during SLSD, the PFP should be considered as a crucial factor for occurrence of DKV.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.1
• /
• pp.29-38
• /
• 2022

In offshore installations, fires cause the structure to lose its rigidity and it leads to structural integrity and stability problems. The Passive Fire Protection (PFP) system slows the transfer rate of fire heat and helps prevent the collapse of structures and fatality. Especially, intumescent epoxy coating is widely used in the offshore industry, and not only is the material cost expensive, but it also takes a lot of time and cost for construction. Several studies have been conducted on the efficient application and optimal design of the PFP system. However, the mechanical properties and the strength of the PFP material have not been considered. In addition, researches on the correlation between the thickness of PFP and the structural behavior were insufficient. Therefore, this study aims to analyze the thermal and mechanical effects of the PFP on the structure when it is applied to the structural member. In particular, it is intended to resolve the change in strength characteristics of the structural members as the thickness of the PFP increases.

• The Korean Journal of Rheology
• /
• v.9 no.2
• /
• pp.60-65
• /
• 1997

PFP성형기술은 사출성형시 수지를 금형내에 환전히 채운후 저압의 공기를 이용하여 기포를 발생시켜 수지의 체적수축분을 기포의 성장에 의해 보상해주는 기술이다. 이방법은 일반 사출성형에서 많이 발생하는 싱크마크나 휨과 같은 변형문제를 해결하여 줄수 있으며 높은 압력을 필요로하지 않는다는 잇점을 가지고 있으나 이러한 최신공정에 대한 체계적인 연구는 미흡한 실정이다. 최근에 제시된 PFP성형공정의 모델링은 기포의 성장이 수지의 체 적수축에 의한 것이라는 가정을 근거로 기포핵이 생성된 이후의 기포성장을 모사하였으며 모델링에 해석결과는 몇가지 가정에도 불구하고 실험결과를 잘 설명하였다. 본 연구에서는 모델링이 가지는 문제점을 분석하고 기포성장의 메카니즘을 보다 체계적으로 이해하기 위하 여 실험적인 방법을 적용하였다. 많은 인자들을 효과적으로 고려하기 위하여 실험계획법을 적용하였으며 이를통하여 기포핵의 생성과 기포의 성장에 공기압 등이 매우 중요한 역할을 한다는 사실을 확인하였다. 이러한 결과는 모델링과 함께 PFP공정에 대한 체계적인 이해 뿐만 아니라 금형설계 및 성형조건의 설정등의 실제적인 문제해결에도 도움이 될것으로 기 대된다.

• Korean Journal of Plant Resources
• /
• v.7 no.2
• /
• pp.171-175
• /
• 1994

The effects of medium, hormones, and PFP on the proliferation of red callus in leaf tissue cultures of Garden orach(Atriplex hortensis L.) was investigated. As a result,88% of leaf tissues formed eallus on MS nledium containing 2mg/$\ell$ 2,4-D. Fresh weight of callus was higher on MS medium than on Bsand NN media. It was also found that 2, 4-D was more effective than Dicamba and Picloram. The op-timum concentrations of hormones for callus proliferation depended on culture media. Isolated red cal-lus grew markedly both on MS medium supplemented with 1-2mg/$\ell$ 2, 4-D and Bs medium contain-ing 2-4111g/$\ell$ 2,4D. Callus proliferated on B5 and NN media containing Dicabma Img/$\ell$ as well as onthe same media containing 2mg/$\ell$ Picioram. The addition of PFP concentrations of 2, 5, and 40mg/ $\ell$rcspectiely to culture medium caused increase of callus fresh weight, especially under light condition.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.287-291
• /
• 1999

Plasma polymerization of Perfluoropropene(PFP) was carried out in a tubular type reactor. The Plasma was generated by coupling inductively under the fixed discharge power of 25W and the pressure of 100, 140, and 200 mTorr of radio frequency generator. PFP plasma polymerization thin films were deposited in acrylic yams. For 1 hours, the acrylic yams treated and untreated by PFP plasma were immersed in boiling water. Then the reduction of contraction coefficient of acrylic yams were measured respectively. As a result of this experiment, untreated acrylic yams were reduced around 23%, while treated yams were contracted about 18-2%.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.826-839
• /
• 2014

Fire is a continuous threat to FPSO topside modules as large amounts of oil and gas are passing through the modules. As a conventional measure to mitigate structural failure under fire, passive fire protection (PFP) coatings are widely used on main structural members. However, an excessive use of PFP coatings can cause considerable cost for material purchase, installation, inspection and maintenance. Long installation time can be a risk since the work should be done nearly at the last fabrication stage. Thus, the minimal use of PFP can be beneficial to the reduction of construction cost and the avoidance of schedule delay. This paper presents a few case studies on how different applications of PFP have influence on collapse time of a FPSO module structure. A series of heat analysis and thermal elasto-plastic FE analysis are performed for different PFP coatings and the resultant collapse time and the amount of PFP coatings are compared with each other.

• Molecules and Cells
• /
• v.27 no.6
• /
• pp.641-649
• /
• 2009

Pyrophosphate:fructose-6-phosphate 1-phosphotransferase (PFP) catalyzes the reversible interconversion of fructose-6-phosphate and fructose-1,6-bisphosphate, a key step in the regulation of the metabolic flux toward glycolysis or gluconeogenesis. To examine the role of PFP in plant growth, we have generated transgenic Arabidopsis plants that either overexpress or repress Arabidopsis PFP subunit genes. The overexpressing lines displayed increased PFP activity and slightly faster growth relative to wild type plants, although their photosynthetic activities and the levels of metabolites appeared not to have significantly changed. In contrast, the RNAi lines showed significantly retarded growth in parallel with the reduced PFP activity. Analysis of photosynthetic activity revealed that the growth retardation phenotype of the RNAi lines was accompanied by the reduced rates of $CO_2$ assimilation. Microarray analysis of our transgenic plants further revealed that the altered expression of $AtPFP{\beta}$ affects the expression of several genes involved in diverse physiological processes. Our current data thus suggest that PFP is important in carbohydrate metabolism and other cellular processes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.493-510
• /
• 2021

Mineral wool is an insulation material commonly used in passive fire protection (PFP) systems on offshore installations. Insulation materials have only been considered functional materials for thermal analysis in the conventional offshore PFP system design method. Hence, the structural performance of insulation has yet to be considered in the design of PFP systems. However, the structural elements of offshore PFP systems are often designed with excessive dimensions to satisfy structural requirements under external loads such as wind, fire and explosive pressure. To verify the structural contribution of insulation material, it was considered a structural material in this study. A series of material tensile tests was undertaken with two types of mineral wool at room temperature and at elevated temperatures for fire conditions. The mechanical properties were then verified with modified methods, and a database was constructed for application in a series of nonlinear structural and thermal finite-element analyses of an offshore bulkhead-type PFP system. Numerical analyses were performed with a conventional model without insulation and with a new suggested model with insulation. These analyses showed the structural contribution of the insulation in the structural behaviour of the PFP panel. The results suggest the need to consider the structural strength of the insulation material in PFP systems during the structural design step for offshore installations.