• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.163-168
• /
• 2016

In this study, we analyzed the empty body weight and nominal volume of different types of polyethylene terephthalate (PET) bottles commercialized in Korean market. Over 780 PET bottles were collected and classified into four types, heat resistance bottle, normal resistance bottle, pressure resistance bottle, and long period using bottle. Each PET bottle's lightness index was established using bottle weight and nominal volume. Based on the index value, "acceptable" and "optimum" criteria for design guideline of PET bottle were summarized for each PET bottle type. In this paper, we suggest the use of PET bottle lightness index as a design guideline for material resource reduction of PET bottle for Korean beverage industries and bottle makers. For example, we can achieve 2~4 g weight reduction in normal pressure bottle for 500 mL drinking water.

• Korean Journal of Food Science and Technology
• /
• v.47 no.4
• /
• pp.425-430
• /
• 2015

The objective of the study was to investigate the off-flavor generated from PET water bottles and their caps by using a mass spectrometry-based electronic nose. The ion fragment data obtained from the electronic nose were used for discriminant function analysis (DFA). In the case of increased concentrations of the contamination of water, the off-flavor pattern depended on the discriminant function second score instead of the discriminant function first score. To identify the cause of off-flavor in polyethylene terephthalate (PET) bottled water, the PET bottle and its cap were analyzed by DFA. The results showed that the cap generated more volatile compounds than the bottle or mineral water did. The substances causing the off-flavor were predicted to be 2,4-di-tert-butylphenol (2,4-DTBP), nonanal, and decanal when the main peak of the mass spectrum was compared with the major ion fragments of the electronic nose. Thus, using this method, we could determine whether the PET water bottle was contaminated and whether the off-flavor resulted from contamination of the bottle cap.

• Resources Recycling
• /
• v.3 no.1
• /
• pp.44-51
• /
• 1994

PET bottles were composed of several different materials such as PET, HDPE, PVC and PP, it is necessary for recycling of PET bottles to precede seperation of each material. This study is purposed of recycling of PET bottles by separation using float and sink method. Pure PET is obtained a proportion of 94% on condition that bottle labels were removed by using tap water. In case the labels were attached on the bottles, PET was unable to obtain because of PVC and PET sink, and PP and HDPE float. Therefore, the labels should be removed before separation of PVC lebels substituted for PP or PE material. The various physical properties of recovered PET and HDPE were measured and compared with the original PET and HDPE, and it is identified that recycling is possible as a result.

• Journal of Korean Society on Water Environment
• /
• v.30 no.2
• /
• pp.199-205
• /
• 2014

The knowledge on the migration of antimony (Sb) from PET bottles into the water is of greate concern. Antimony in all bottled water marketed in korea and in raw water was analyzed. The detection rate of antimony in total bottled water was 88 % and 100% in PET (Polyethylene terephthalate, PET), 55% in PC (Polycarbonate, PC) bottled water. 55% of raw water contained antimony. The average concentration of Sb in PET bottled water was $0.39{\mu}g/L$, higher than PC bottles ($0.20{\mu}g/L$) and the raw water ($0.22{\mu}g/L$). The migration of Sb into water that is stored in different conditions (room temperature, $45^{\circ}C$, and direct sunlight exposure) was investigated for 180 days. The migration tendency increased with the storage time and temperature. PET bottles showed a sharp increase of Sb concentration at $45^{\circ}C$, but there was no differences between the room temperature and sunlight exposure. The Sb migration in all simulated solution(deionized water, 4% acetic acid, and 20% ethanol) also increased with storage time and temperature. The Sb migration values ranged from 0.35 to $0.49{\mu}g/L$ in all simulated solution, which was far below the permissible korean migration level of $40{\mu}g/L$. There was a tendency that the number of re-use of a bottle and the amount of leaching were in inverse proportion.

• Advances in concrete construction
• /
• v.12 no.6
• /
• pp.461-467
• /
• 2021

Polyethylene-terephthalate (PET) from bottle waste and linear low-density polyethylene (LLDPE) from barrels and tanks waste are widely available and need to be recycled. Recycling them in concrete and mortar is an alternative solution for their disposal. In this study various quantities of sand (5%, 10%, 15% and 20%) were substituted by powder from LLDPE waste. In addition, PET waste fibers (corrugated, straight) were added to the mortar with different percentages (0.5%, 1%, 1.5% and 2%) of cement mass. This paper evaluate the mechanical and physical properties of the composites in fresh (workability, air content and density) and hardened state (compressive and flexural strength, water absorption and total shrinkage). From the experimental results, it can be concluded that the strengthening in tensile of the mortar with plastic waste corrugated fibers is improved. Other important results are that the water absorption and the density rate are less than that of the ordinary mortar.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.79-87
• /
• 2004

The qualify of lightweight aggregate made from waste PET bottle(WPLA) and the workability, the unit weight and strength property of concrete with WPLA were investigated for the purpose of recycling the waste PET bottles as lightweight concrete fine aggregate. This study indicated a good result that WPLA should be replaced with less than $50\%$ of natural fine aggregate. When WPLA was replaced with $50\%$ of natural fine aggregate, the specific gravity and water absorption of mixed fine aggregate were greatly reduced about 23 and $75\%$ respectively in comparison with those of river sand. The quality of WPLA affected on the properties of lightweight aggregate concrete. The workability of fresh concrete with WPLA(WPLAC) was improved with increasing the replacement ratio of WPLA and water cement ratio. Slump increasing ratio of the former showed about $45 {\~} 120\%$ because that a specific gravity of fine aggregate was decreased from 2.6 to 1.7. The unit weight of concrete with $75\%$ WPLA was decreased about $17\%$ in comparison with that of control concrete. Furthermore, the compressive strength of concrete with 25 and $50 \%$ WPLA at the age of 28 days increased higher than 30 MPa regardless with water cement ratio (W/C=45, 49 and $53\%$) of this study. Specific strength of concrete with $25\%$ WPLA, $15.11{\times}10^3 MPa{\cdot}m^3/kg$, was higher than that of contro concrete in water cement ratio of $49\%$. The compressive strength-splitting tensile strength ratio and compressive strength-modulus of elasticity ratio of WPLAC were similar to that of nomal lightweight aggregate concrete. This results showed a good estimation that WPLA will be able to recycled as a fine aggregate for lightweight concrete.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.27-33
• /
• 2008

Polyethylene terephtahalate has been used in several areas such as fiber, film, bottle, and disposable products. Production of PET has been rapidly increasing these days. Since PET is a semi-permanent material, it has a non-biodegradable character in itself. Wasted PET products can cause serious environmental problems. Many countries around the world impose environmental legal restrictions over their abandonments. Many researches on the enviromental influence factors and treatment techniques of the wasted PET have been carried out. The main objective of this study is to develop a new sizing agent using recycling PET and improve its internal sizing effect. Dried powder of PET was used to make the modified PET. After extracting water-dispersible PET by subcritical hydrolysis, polyester resins have been extracted and triphenyl phosphate(TPP) has been added to obtain optimal internal sizing agent. It was found that the optimum dosage of TPP was 2% (per PET weight) and the hydrolysis temperature was independent on making the modified PET.

• Korean Journal of Food Science and Technology
• /
• v.46 no.1
• /
• pp.19-24
• /
• 2014

This study was carried out to identify the volatile organic compounds (VOCs) in polyethylene terephthalate (PET) bottles and to determine the extent to which VOCs migrate into mineral water during the bottling process and storage. A greater amount of nonanal and decanal was generated from the PET bottles than from the PET preforms. Benzene, ethylbenzene, nonanal, and vinyl benzoate were identified from the PET bottles when the incubation temperature of the headspace solid-phase microextraction (HS-SPME) sampler was set to 60, 80, and $100^{\circ}C$. As the incubation temperature increased, the concentrations of nonanal, vinyl benzoate, and decanal increased significantly. When the high-density polyethylene (HDPE) PET bottle caps were extracted with dichloromethane, the level of Irgafos 168 was found to be $206{\pm}20.1\mu}g/g$. The concentration of 2,4-di-tert-butylphenol in water was $4.80{\pm}0.2{\mu}g/L$. Therefore, it is necessary to avoid exposing PET and HDPE resins to high temperatures during the manufacturing process and storage of bottled water.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.603-608
• /
• 2019

Plastic waste is becoming a problem in various countries because of the difficulty of natural decomposition. One type is PET plastic(Polyethylene Terephthalate), which is often used as a bottle for soft drink packaging, and LDPE(Low Density Polyethylene), which is also widely used as a food or beverage packaging material. The use of these two types of plastic continuously, without good recycling, will have a negative impact on the environment. Building material waste is also becoming a serious environmental problem. This study aims to provide a solution to the problem of the above plastic waste and building material waste by making them into a mixture to be used as bricks. Research is carried out by mixing both materials, namely plastic heated at a temperature of $180-220^{\circ}C$ and building material waste that had been crushed and sized to 30-40 mesh with homogeneous stirring. The ratios of PET and LDPE plastic to building material waste are 9 : 1, 8 : 2, 7 : 3, 6 : 4 and 5 : 5. After heating and printing, density, water absorption and compressive strength tests are carried out. Addition of PET and LDPE plastic can increase compressive strength, and reduce water absorption, porosity and density. A maximum compressive strength of 10.5 MPa is obtained at the ratio of 6 : 4.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.2
• /
• pp.61-68
• /
• 2023

Demand for "pet plants" and "planteriers" is increasing due to the increase in COVID-19 and fine dust. In this paper, Smart pots for planterior should be small in size while providing the functions for cultivation without any problems. They should provide a user interface for long-range control for user's convenience. We implemented smart pots by incorporating IoT into pots. In response to the growing number of iPhone users, we developed an iOS app for user interface and UX/UI design. By communicating with the smartphone app and a home pot server over the Internet, users can check and control the state of the pot anytime, anywhere. The server and the pot module were separated to reduce the size of the pot itself. By locating a water bottle at the bottom of the pot, we expect that it is suitable for a "planterier" because it adopts a circulating structure in which drainage flows down to the water bottle as it is.