• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.709-712
• /
• 2008

본 연구에서는 재생 PET섬유 보강 콘크리트의 화학적 환경하에서의 성능평가를 실시하였다. 화학적 환경으로는 알칼리, 염해 및 융빙제 환경을 고려하였으며 각각의 화학적 환경에서 30, 60, 90일간 침지한 후 재생 PET섬유 보강 콘크리트의 압축강도를 측정하였다. 시험결과 PET섬유 보강 콘크리트는 알칼리 환경에서 성능저하가 발생했으며 염해 및 융빙제 환경에서는 우수한 성능을 나타내었다.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.305-312
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The effects of ultrasonic application, treatment time and temperature at NaOH 4% and 6"A solution on the decomposition rate of PET fabrics. From the results of the decomposition rate of PET fabrics, the qualitative and quantitative analysis of oligomer after decomposition of PET fabrics carried out by the HPLC. On the other hand, the surface pore characteristics of decomposition PET fabrics measured by porosimetery. The pore characteristics on the surface of treated PET fiber depended on the decomposition rate and did not depend on the ultrasonic cavitation. The pore diameter of alkaline untreated PET fiber were 15A and those of treated PET fibers were 5~6$\AA$ at the maximum pore volume. The average pore sizes of fiber before and after treatment were 141 h and 160h, respectively. Total amount of oligomer of the untreated PET fibers were 1.70wt% and 67.7% of total oligomer occupied with PET cyclic trimer and PET cyclic tetramer. Total amount of oligomer of fiber with 26.9% and 48.0% of weight loss without ultrasonic application were 1.78wt% and 1.79wt%, respectively. Also total amount oligomer of fibers which were reduced 27.7% and 48.2% of weight loss with ultrasonic application were 1.74wt%. This result showed that the removal rate of oligomer in the process of alkaline hydrolysis with ultrasonic higher than that of without ultrasonic application.tion.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.331-332
• /
• 2003

Poly(ethylene terephthalate) (PET)는 물리적, 기계적 성질이 우수한 엔지니어링 플라스틱의 하나로 섬유, 필름 및 각종 산업용 소재로 가장 널리 이용되고 있는 고분자 중의 하나이다. 그러나 PET 자체의 성질만으로 고기능성 소재로의 다양한 요구를 충족시키기에는 한계가 있어 PET의 벤젠고리 대신에 나프탈렌 고리로 치환하거나 제 3성분의 2가 알코올을 첨가하여 PET보다 유리전이 온도와 용융 온도가 높고 형태안정성 및 기계적 물성이 우수한 고분자의 개발에 관한 연구가 다수 이루어져 왔다.$^{1.2}$ (중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.337-338
• /
• 2003

PTT(poly trimethylene terephthalate)섬유는 PET(polyethylene terephthalate)섬유에 비하여 탄성 (elasticity)가 우수하고 염색성이 PET와 유사한 점에서 차세대섬유로 분류되고 있다. 분자의 구조가 trans-trans의 fully extended chain(rod shape)형태인 PET에 비하여 trans-gauche-gauche-trans의 스프링과 같은 extended zigzag(helix shape)이어서 탄성회복성이 우수하다. 또한 PTT의 탄성계수값은 PET에 비하여 $\frac{1}{2}$정도이다. 의복을 착용중 신장과 수축을 반복하는 과정에서 섬유는 탄성을 점차 상실하게 되는데, 이 응력완화의 변화특성에 따라서 착용감이 영향을 끼친다. (중략)

• 패션비즈니스
• /
• 제11권1호
• /
• pp.15-25
• /
• 2007

As a part of the study for the materials development of compound feelings, therefore, this study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the dyeing of cotton and PET fabrics individually with the same color, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Second, in the case of the dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the color of cotton fiber, which is warp, gave much influence. In addition, the color change was remarkable among complementary colors, while it was negligible among adjacent colors. Third, in the case of dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the results were different by the measuring angle. When PET was fixed in green and cotton was dyed in ten colors, color-deepening was observed by the inclination in the direction of warp and weft without the dominance over all colors like cotton. When cotton was dyed in red and PET in ten colors, the color of PET appeared dimly in the horizontal case by the direction of the light, and red appeared as inclined in the direction of warp and weft. This is because of the dominance of cotton color over the overall color, since the density of cotton fiber, the warp of union fabrics, is higher than that of PET, the weft. Thus, this is to be considered in the selection of the warp's color. In view of the above results, the color changes are outstanding when the color of warp dominates the overall color and when the colors of warp and weft are complementary, in comparison with the case when the colors are adjacent. The colors also change by the measuring angle.

• 패션비즈니스
• /
• 제13권1호
• /
• pp.82-90
• /
• 2009

This research was made to manufacture the fabric for interior uses by spinning a low melting mono 4 denier PET staple fiber with a soluble 1.4 denier fine PET fiber. The blended yarn has a thickness ranging from 10's to 14's, and the soluble PET fine fiber was dissolved to make a pore in the polymer. Thereby a snap property was decreased and a resilience property was improved to be suitable for a functional synthetic leather. In order to attain the optimum condition, a mechanical property according to fineness, and mixing ratio of low melting polymer, warp density, weft density and blending ratio, and a heat contraction ratio according to blending ratio were experimented. The warp density, 220 T/inch of fine denier PET and the weft density, 64 T/inch of thick denier PET were generated to 4/4 both twill weave fabric having constant tensile property and thickness.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.669-679
• /
• 2018

In this paper the behavior of reinforced concrete (RC) beam-column connections under cyclic loading was analyzed. The specimens, manufactured in a reduced-scale were made of (a) recycled aggregate concrete (RAC) by replacing 30% of natural coarse aggregate (NCA) with recycled coarse aggregate (RCA) and (b) RAC incorporating Polyethylene terephthalate (PET) fiber i.e., PET fiber-reinforced concrete (PFRC) at the joint region. PET fiber (aspect ratio=25) of 0.5% by weight of concrete used in the PFRC mix was obtained by hand cutting of post-consumer PET bottles. A reference specimen was also prepared using 100% of NCA and subjected to similar loading sequence. Comparing the results the structural behavior under cyclic loading of RAC specimens are quite similar to the reference specimens. Damage tolerance, load resisting capacity, stiffness degradation, ductility, and energy dissipation of the RAC specimens enhanced due to addition of PET fibers at the joint region. PFRC specimens also presented a lower damage indices and higher principal tensile stresses as compared to the RAC specimens. The results obtained gave experimental evidence on the feasibility of RAC for structural use. Using PET fibers as a discrete reinforcement is recommended for improving the seismic performance of RAC specimens.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1992년도 제2차 학술발표초록집
• /
• pp.65-66
• /
• 1992

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1994년도 춘계학술발표회 프로그램 및 초록
• /
• pp.54-54
• /
• 1994

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1996년도 추계 학술발표회
• /
• pp.154-159
• /
• 1996