• 공업화학
• /
• 제4권4호
• /
• pp.760-769
• /
• 1993

Polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), propylene oxide와 ethylene oxide의 블럭 공중합체[p(PO-b-EO)glycol], Sedlan FF-200(FF-200) 및 polyoxyethylene(10) nonylphenyl ether의 술폰산-아민축합물 (PSAC) 등을 블렌딩하여 무용제형 저기포성 정련제 (LFSA)를 제조하였다. LFSA로서 여러 가지 물성시험을 해 본 결과 FF-200/POAC/p(Po-b-EO) glycol/PSAC/water(20g/10g/5g/5g/60g) 혼합물(LFSA-5)은 세정력, 침투력, 유화력, 알칼리 안정성 등이 양호하였으며, 수질오염에 대한 영향이 크지 않았다. LFSA-5의 정련효과는 정련전 후의 염색온도에 따른 염착률의 변화로서 확인하였는데, 정련전 PET 직물인 경우는 $70^{\circ}C$에서 4.5%의 염착률을 나타낸데 반하여, LFSA-5로서 정련된 직물은 1.3%의 염착률을 나타냄으로써 LFSA-5의 정련효과가 양호함을 알 수 있었다. 또한 LFSA-5는 Ross and Miles법에 의한 거품 생성 직후의 기포력이 포고 6mm로 나타났고, Ross and Clark법에 의한 기포력이 $30^{\circ}C$에서는 포고 300mm 이하로, $80^{\circ}C$에서는 20mm를 각각 나타내어 양호한 저기포성 정련제임이 입증되었다.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.620-629
• /
• 2013

This study examines the rustling sound characteristics of electrospun nanofiber web laminates according to layer structures. This study assesses mechanical properties and frictional sounds (such as SPL); in addition, Zwicker's psychoacoustic parameters (such as Loudness (Z), Sharpness (Z), Roughness (Z), and Fluctuation strength (Z)) were calculated using the Sound Quality Program (ver.3.2, B&K, Denmark). The result determined how to control these characteristics and minimize rustling sounds. A total of 3 specimens' frictional sound (generated at 0.63 m/s) was recorded using a Simulator for Frictional Sound of Fabrics (Korea Patent No. 10-2008-0105524) and SPLs were analyzed with a Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured with a KES-FB system. The SPL value of the sound spectrum showed 6.84~58.47dB at 0~17,500Hz. The SPL value was 61.2dB for the 2-layer PU nanofiber web laminates layered on densely woven PET(C1) and was the highest at 65.1dB for the 3-layer PU nanofiber web laminates (C3). Based on SPSS 18.0, it was shown that there is a correlation between mechanical properties and psychoacoustic characteristics. Tensile properties (LT), weight (T), and bending properties (2HB) showed a high correlation with psychoacoustic characteristics. Tensile linearity (LT) with Loudness (Z) showed a negative correlation coefficient; however, weight (T) with Sharpness (Z) and Roughness (Z), and bending hysteresis (2HB) with Roughness (Z) indicated positive correlation coefficients, respectively.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• 한국의류학회지
• /
• 제13권4호
• /
• pp.400-411
• /
• 1989

Moisture related properties of fabrics in dynamic modes are considered to be important in the judgement of the subjective comfort characteristics of clothing fabrics. In the current study, an attempt to improve the cobaltous chloride test method was made which has been known as a convenient screening test for dynamic surface wetness. The color changes of cobaltous chloride treated fabrics on the simulated sweating skin were calibrated against standard color strips. The standard color strips were made of all typs of test fabrics and installed inside of the test tubes containing a series of saturated salt solutions, which gives more quantitative informations on dynamic moisture transfer Influences of fiber types and finishes on dynamic moisture transfer in textiles were studied using a single layer of fabric samples. Fiber types included $100\%$ cotton, C/P 50/50, C/P 35/65. Durable press and soil release finished cotton and C/P 50/50 fabrics were also included. There were significant fiber effects on the dynamic moisture transfer. The order of time taken to reach to the specified $\%$ RH was C/P 35/65$100\%$ cotton fabrics. It was possible to detect significant finish effects by increasing the concentrations of cobaltous chloride solutions. The order of time taken to reach to the specified $\%$ R.H was durable press$100\%$ cotton, C/P 50/50, C/P 35/65 and $100\%$ PET were placed at the inner side of the outer layer and tested. It was shown that cobaltous chloride treated $100\%$ cotton fabirc was easier to detect color changes than C/P blend fabic in the double layer experiments. By placing test sample under the cobaltous chloride treated cotton fabrics, it was able to detect the differences among the test samples, some of which were known to be difficult in padding with cobaltous chloride solutions. Besides, the double layer method would provide with the broader application of the cobaltous chloride method in !uture, since it is possible to test the dynamic moisture transfer of clothing as worn.

• 한국조경학회지
• /
• 제35권5호
• /
• pp.64-72
• /
• 2007

This study investigated the types, forms, and origination of litter found along one hiking course in Moaksan Provincial Park, 'Jungin-ri Course'(entrance-ridge-valley-peak). In addition, a survey was conducted to understand hikers' litter control awareness in order to determine possible backcountry litter control measures. The following are the results of this study: 1. For the litter Sequency investigation, 199 recyclable pieces of litter were found on the mid-slope(61.6%), 89 by the entrance(27.6%), 19 in the valley(5.9%) and 16 on the peak(4.9%). A total of 323 pieces of litter were found. Paper materials were the most common, followed by plastic containers such as PET bottles and yogurt containers. Of particular interest, 288 papers and cans were found on the mid-slope(46.9%). By the entrance, more plastics and bottles were found. 2. There were 614 pieces of flammable litter collected and only 19 pieces of non-flammable. Most of the flammable litter, including snack pacts, plastic bags, processed lumber, cigarette butts, tissues, cigarette boxes, and fabric was found on the mid-slope. 3. Very little food waste was found throughout the whole site proving that the policy prohibiting hikers from cooking and eating at the designated sites has been effective. However, food waste is difficult to find because it naturally decays with time. 4. $X^2$-test was used to find different types of litter and their verified origination frequency. It was found that recyclable litter, and food waste took about 1%. In addition, recyclable litter, especially bottles, was found relatively frequently by the entrance. Flammable litter was found most often at the peak. 5. The questionnaire results showed that 48.2% of the respondents "shorten their hiking journey and purchase food outside the entrance" and 29.6% said that they "bring a packed meal from home". Only 8.2% said that they "cook something when an appropriate location is found". At the Jungin-ri course, a few hikers brought their own food to eat or cook, but most hikers purchased something to eat onsite. 6. The results of the question about having experience littering while hiking showed that 19.3% litter and 79.2% do not. Those that responded "yes" gave various reasons for littering. 63.6% claimed, "there are no designated trash containers". 15.9% said they litter subconsciously. Finally, 3.2% insist that they litter "because food naturally decomposes". 7. As a result of the overall satisfaction according to the Likert scale and the analysis with an average of 14 variables, it was found that the average "toxic litter control convenience" was 2.41 with very low satisfaction. Thus, the results indicate the importance of providing appropriate back country litter control facilities.

• 한국방사선학회논문지
• /
• 제17권3호
• /
• pp.441-447
• /
• 2023

현재 의료방사선 분야에서 차폐를 목적으로 주로 사용되고 있는 납(Pb)소재는 방사선 차폐 기능은 뛰어 나지만 납 자체가 가지고 있는 인체 유해성과 무거운 무게에 의한 불편함 때문에 지속적으로 직, 간접적으로 방사선 피폭 위험을 차단함과 동시에 납 소재를 대체할 수 있는 인체 친화적인이며 가벼우면서 사용편의성을 가진 차폐소재의 연구는 지속적으로 진행되어지고 있다. 본 연구에서는 일반적으로 사용되는 PET(polyethylene terephthalate) 필름과 실제 방사선 방호복 사용되는 원단소재를 기재로 하여 방사선을 차폐할 수 있는 금속물질인 비스무트, 텅스텐, 주석을 스퍼터링 진공증착 방식을 통한 다층박막을 구현하여 차페필름을 제작하여 방사선 차폐소재로의 적용가능성을 평가하였다. 차폐필름을 제작하기 위한 인가전압, 롤 구동속력, 가스공급량을 제어하면서 차폐물질별 최적화된 조건을 확립하여 방사선 차폐필름 제작하였다. 모재와 차폐금속박막간 밀착력 확인은 Cross-cut 100/100으로 확인하였고 시간에 따른 박막의 변화를 측정하기 위해 내열탕 테스트 1시간을 통하여 박막의 안정성을 확인하였다. 최종적으로 구현된 차폐필름의 차폐성능은 한국방사선진흥협회를 통한 실제 방사선 차폐성능을 측정한 결과 시험조건(역넓은 빔, 관전압 50 kV, 반가층 1.828 mmAl)을 설정하여 감쇠비 16.4 (초기값 0.300 mGy/s, 측정값 0.018 mGy/s)와 감쇠비 4.31(초기값 0.300 mGy/s, 측정값 0.069 mGy/s)의 결과를 얻었다. 추후 제품화를 위한 공정효율성을 확보하여 가벼우면서 차폐성능을 보유한 필름 및 원단을 활용하여 방사선 방호복이나 차폐기능을 가진 건축자재로의 필름적용을 위한 초석을 마련하였다.

• 마케팅과학연구
• /
• 제20권1호
• /
• pp.59-69
• /
• 2010

绿色环保或者环境意识已经成为商业、政府机关, 以及消费者和世界关注的重要问题. 针对这一情况, 韩国政府宣布, 在本世纪初, "环保建设" 将被作为一种用以鼓励与环保相关的商业活动的方式. 不同层次的韩国服装业, 提出了不同的产品环保的绿色计划. 这些服装产品包括有机产品和回收的衣服. 要想使这些公司成功, 他们需要那些, 在做产品购买,使用, 处置时, 将绿色问题(如环境的可持续性发展)作为一个人判断的一个组成部分的顾客的信息. 这些消费者可以被看成是生态学的关注者. 过去的研究已经对消费者对于环保产品的购买意愿进行了检测. 此外, 还研究了影响生态保护者或绿色消费者的因素. 但是, 只是关注生态保护者在处置或者回收利用衣服上与采购绿色产品相比较是不够的. 服装处置行为有多种途径, 消费者可以用淘汰, 传承(例如: 把它送给一个年幼的弟弟), 赠与, 交换, 出售或者简单的把他扔掉等多种方式来暂时或者永久的摆脱闲置的衣服或贷款项目. 因此, 购买环保产品的行为应该结合服装处置的行为, 从而进一步了解消费者的消费行为与对环境的态度. 本项研究的目的在于提供韩国生态保护者从有利于生态学的角度出发来购买和处理衣服的生活方式的相关信息. 本研究的目标有: 1, 基于韩国对服装处置行为进行分类; 2, 调查人 们人口统计数据, 生活方式和服装消费价值观赏的差异; 3, 在环保的时尚物品的购买意愿和影响因素之间进行比较. 自填式的调查问卷是基于以往的研究设置出来的. 问卷包括10项处置衣服的条款, 22项可持续并且健康的生活方式的条款, 以及19项消费观念的条款. 根据利克特模板的五分量表设置. 此外, 购买两个时尚物品的意愿和每个物品属性的11项特征都是根据利克特模板的七分量表而来, 两种制成羊毛套衫的可以从PET识别代码的回收瓶子中创造出来的涤纶织物这两种套衫选自一个韩国和一个美国的户外运动服装的品牌. 我们对每一种产品的简介和颜色都进行了调查, 人口统计学(即性别, 年龄, 婚姻状况, 教育程度, 收入, 职业)也被包括在内. 在2009年5月份, 研究数据通过一个专业网站的调查机构进行采集, 最后有600份调查问卷可供分析, 这个调查的受访者年龄从20到49岁不等, 平均年龄为34岁. 百分之50的调查者为男性, 大约58%的受访者是已婚者, 其中62%的受访者有大学学位. 主要成分分析和因素最大方法差的方法用以识别衣服处理规模的潜在尺度. 共有三个因素生成(比如: 倒卖行为, 捐赠行为, 不回收利用行为). 基于他们处置衣服的方式对受访者进行了分类, 群类分析被使用, 最终得到了三个部分. 不同的消费者, 被分别贴上 "转售集团", "捐资团体" 以及 "不回收组织" 的标签加以分类, 其中98%是正确的分类. 从人口统计学角度来看, 这三个类别的人在性别, 婚姻状况, 职业和年龄上有显著的差异. 健康可持续的生活方式被缩减为以下5个因素: 自我满意度, 家庭定位, 健康问题, 环境问题和自愿的服务. 这是三个群体中健康可持续的生活方式的最显著的差异. 转售集团和捐赠组表现出在健康可持续的生活方式上的相同倾向, 同时, 不回收集团在生活方式方面呈现最低的平均值. 转售和捐赠团体自称享受和满意这种生活和消费方式, 并且能够利用空余的时间陪伴家人. 另外, 这两组的人关心健康和有机食品, 并试图保护能源和资源. 对服装消费的价值观产生主要影响的三个因素是: 个人价值, 社会价值和实用价值. 因素的方差测试表明转售集团和其他两组之间的因素差异最大. 转售集团相比其他价值更关注个人价值和社会价值. 相比之下, 非回收集团比捐赠集团更关注高层次的社会价值. 比较购买环保产品的意愿上, 转售集团表现出最高的购买A类产品的意愿. 另一方面, 捐赠集团则在小市场中表现出购买B类产品的最高意愿. 此外, 平均分数表明, 购买韩国的产品(B类产品)相比购买美国的产品(A类产品)更合韩国人的心意. 多元线性回归分析法确定了对环保产品的购买的意愿对制造业产品属性的影响. 产品的设计, 价格, 贡献, 对环境的保护, 价格, 兼容性是影响转售集团的显著因素, 另外, 以及对自身形象的影响是捐赠团体的重要因素. 对于非回收集团来说, 设计, 价格等因素是相同的, 自我的形象,对环保运动的贡献, 和环境保护也是很重要的. 而价格因素具有显著性的共通性. 对于B类产品来说, 设计, 合理的价格, 形象等因素是同等的重要, 但是不同的组对购买的特征和意愿有不同的倾向. 健康可持续的生活方式以及服装消费的意向对购买A类产品和B类产品的影响同样被我们所关注. 实际操作者的健康状况和个人价值都是影响购买意愿的重要因素; 然而, 在这三个群体中说服的力度都很低. 结果表明, 分类出来的每组处理服装的行为, 显示着不同服装产品的属性, 个人价值, 和实践者的特点, 这些都影响了他们的购买环保产品的意愿, 结果会使生态保护者提出并组织更合理的生态设计的战略决策.