• Journal of the Korean Electrochemical Society
• /
• v.21 no.4
• /
• pp.80-87
• /
• 2018

Safety issues in Li-ion battery system have been prime concerns, as demands for power supply device applicable to wearable device, electrical vehicles and energy storage system have increased. To solve safety problems, promising strategy is to replace organic liquid electrolyte with non-flammable solid electrolyte, leading to the development of all-solid-state battery. However, relative low conductivity and high resistance from rigid solid-solid interface hinder a wide application of solid electrolyte. Composite electrolytes composed of organic and inorganic parts could be alternative solution, which in turn bring about the increase of conductivity and conformal contact at physically rough interfaces. In our study, composite electrolytes were prepared by combining poly(ethylene oxide)(PEO) and $Li_7La_3Zr_2O_{12}$ (LLZO). The crystallinity, morphology and electrochemical performances were investigated with the control of LLZO contents from 0 wt% to 50 wt%. From the results, it is concluded that optimum content and uniform dispersion of LLZO in polymer matrix are significant to improve overall conductivity of composite electrolyte.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.213-221
• /
• 2011

Using poly(ethylene oxide) (PEO) as a polymer host, poly(ethylene glycol) (PEG) as a plasticizer, potassium iodide and iodine as sources of $I^-/I_3^-$, polymer electrolyte membranes were prepared. Based on the polymer electrolytes, solid-state dye-sensitized solar cell (DSSC)s were fabricated. The content of PEG in the electrolyte was controlled to be 95%. The mole number of KI per 1 mole of EO ([KI]/[EO] ratio) in the electrolyte was changed to be 0.022, 0.044, 0.066 and 0.088. The electrolyte membrane showed wax phase in ambient temperature. The ionic conductivity increased with increasing KI content to reach the maximum value at which [KI]/[EO] ratio is 0.066. After the maximum value, the ionic conductivity decreased with increasing KI content. In the case of DSSC, the Voc decreased continuously with increasing KI content in the polymeric electrolyte membrane. The $J_{SC}$ increased with increasing KI content to show maximum value at which [KI]/[EO] ratio is 0.044. In the higher KI content region, $J_{SC}$ value decreased with increasing KI content.

• Membrane Journal
• /
• v.33 no.3
• /
• pp.94-109
• /
• 2023

1,3-Dioxolane is an exciting material that has attracted widespread interest in the chemical, paint, and pharmaceutical industries as a solvent, electrolyte, and reagent because 1,3-dioxolane is not toxic, carcinogenic, explosive, auto-flammable, and multifunctional, and due to their excellent miscibility in most organic and aqueous solvent conditions. Recently, this material has received increasing attention as a CO₂-selective polymer precursor to separating CO₂ from flue gas and natural gas mixtures. Poly(1,3-dioxolane) (PDXL) possesses higher ether oxygen content than polyethylene oxide (PEO), which demonstrates superior membrane CO₂/N₂ separation properties owing to their polar ether oxygen groups exhibiting strong affinity toward CO₂. Thus, PDXL-based membranes displayed an outstanding CO₂ solubility selectivity over non-polar (N₂, H₂, and CH₄) gases. However, the polar groups of PDXL, like PEO, promote chain packing efficiency and cause polymer crystallization, thereby reducing its gas permeability, which should be improved. In this short review, we discuss the recent advancement and limitations of PDXL membranes in gas separation applications. To conclude, we provide future perspectives for inhibiting the limits of 1,3-dioxolane-based polymers in the CO₂ separation process.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1685-1687
• /
• 1996

Recently, conducting polymer has been much attracted as novel materials because of its electronic behavior and functional application by doping process. In this paper, we electrochemically synthesized polyaniline films under potential sweep conditions, which exhibit high electric conductivity about 200 S/cm. Specific energy of 600 Wh/kg and Ah efficiency 98% were achieved during the charge/discharge cycling using liquid electrolyte system. On the other hand, consequences of the cycling were 260 Wh/kg and 95% Ah efficiency using polyethylene oxide(PEO) based solid-state electrolyte system.

• Advances in Energy Research
• /
• v.5 no.3
• /
• pp.219-226
• /
• 2017

Electrochemical double layer capacitors (EDLCs) have received a tremendous interest due to their suitability for diverse applications. They have been fabricated using different carbon based electrodes including activated carbons, single walled/multi walled carbon nano tubes. But, graphite which is one of the natural resources in Sri Lanka has not been given a considerable attention towards using for EDLCs though it is a famous carbon material. On the other hand, EDLCs are well reported with various liquid electrolytes which are associated with numerous drawbacks. Gel polymer electrolytes (GPE) are well known alternative for liquid electrolytes. In this paper, it is reported about an EDLC fabricated with a nano composite polyethylene oxide based GPE and two Sri Lankan graphite based electrodes. The composition of the GPE was [{(10PEO: $NaClO_4$) molar ratio}: 75wt.% PC] : 5 wt.% $TiO_2$. GPE was prepared using the solvent casting method. Two graphite electrodes were prepared by mixing 85% graphite and 15% polyvinylidenefluoride (PVdF) in acetone and casting n fluorine doped tin oxide glass plates. GPE film was sandwiched in between the two graphite electrodes. A non faradaic charge discharge mechanism was observed from the Cyclic Voltammetry study. GPE was stable in the potential windows from (-0.8 V-0.8 V) to (-1.5 V-1.5 V). By increasing the width of the potential window, single electrode specific capacity increased. Impedance plots confirmed the capacitive behavior at low frequency region. Galvanostatic charge discharge test yielded an average discharge capacity of $0.60Fg^{-1}$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.214-214
• /
• 2003

고체 고분자 전해질에 대한 연구는 1979년 wright와 Armand에 처음 시작된 이래로 지난 20여년간 연구가 계속적으로 지속되고 있다. 전지의 적용되기 위해 전해질이 갖추어야 할 조건중에 이온전도도가 상온에서 10-4 S/cm 이상의 전도도를 나타내야 하지만 지금까지 연구되고 있는 여러 고체 고분자 전해질은 이런 조건을 만족시키지 못하고 있는 실정이다. 본 연구에서는 이런 상온에서의 이온 전도성을 향상시키기 위해 여러 종류의 실리카와 세라믹 계열의 첨가제를 첨가하여 이온전도성의 향상을 꾀하고자 하였다. 본 연구에서는 고체 고분자 전해질의 host polymer로써 분자량 400,000 의 Polyethylene oxide를 사용하였으며 Lithuim salt로는 Lithium (bisperfluroethylsulfonyl)imide(3M)를 기본적으로 사용하였다. 여기에 가소제의 역활로써 (3-cyanopropyl)methylsiloxane cyclics를 첨가하였고 표면그룹이 CH3와 OH기로 이루어진 기능성 나노 실리카를(<11nm)이용하여 함량별 전기 화학적 특성 및 기본 물성을 측정하였다. 기본적으로 이 네 가지 물질을 유기용매 Acetonitril에 잘 용해하여 Solid Casting방법으로 80-100 마이크로의 복합고분자 전해질을 제조하였다. Homogeneous하고 uniform한 필름 제조하기 위해 9$0^{\circ}C$에서 열처리를 24h 동안 실시하였다. 제조되어진 복합고분자전해질은 XRD를 통하여 결정성을 조사하였고 DSC를 이용하여 유리 전이온도 및 결정화도를 조사하였다. 복합고체고분자의 전기화학적 성질을 평가하기 위해 blocking electrode를 제작하여 임피던스 스펙트로 스코피를 이용하여 이온전도성을 측정하였다. 또한 복합 고분자 전해질의 온도의존성에 대해서도 조사하였다. 또한 실제 전지의 작동구간에서의 전해질의 안정성을 확인하기 위해 LSV를 측정하였고. Li metal을 사용하여 non-blocking electrode를 제작하여 복합고분자 전해질과의 계면저항을 측정하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.64.1-64.1
• /
• 2010

The morphology of mesoporous $TiO_2$ films plays an important role in the operation of a DSSC. For example, the energy conversion efficiency of DSSCs with well-organized mesoporous $TiO_2$ films is much higher than those with traditional films possessing a random morphology. In previous research, well-organized mesoporous $TiO_2$ films have mainly been synthesized using an amphiphilic block copolymer, e.g., a poly(ethylene oxide) (PEO)-based template. A graft copolymer is more attractive than a block copolymer due to its low cost and the ease with which it can be synthesized. In this work, we provide the first report on the successful synthesis of well-organized mesoporous $TiO_2$ films templated by an organized graft copolymer as a structure directing agent. Well-organized mesoporous $TiO_2$ films with excellent channel connectivities were developed via the sol gel processusing an organized PVC-g-POEM graft copolymer synthesized by one-pot ATRP. The careful adjustment of copolymer composition and solvent affinity using a THF/$H_2O$/HCl mixture was used to systematically vary the material structure. The influence of the material structure on solar cell performance was then investigated. A solid-state DSSC employing both the graft copolymer templated organized 700 nm-thick $TiO_2$ films and graft copolymer electrolytes exhibited a solar conversion efficiency of 2.2% at 100 $mW/cm^2$. This value was approximately two-fold higher than that attained from a DSSC employing a random mesoporous $TiO_2$ film. The solar cell performance was maximized at 4.6% when the film thickness was increased to $2.5{\mu}m$. We believe that this graft copolymer-directed approach introduces a new and simple route toward the synthesis of well-organized metal oxide films as an alternative to a conventional block copolymer-based template.