• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.101-113
• /
• 2006

Generally, asphalt binder modifier increases the viscosity at high temperature as well as at mixing and paving temperature, so that higher temperature is required to produce the hot-mix asphalt. Otherwise, wax is able to improve workability by means of decreasing the viscosity of asphalt binder. In this study, the effect of PE wax used to modify the asphalt binder was evaluated in laboratory. The properties of PE wax modified binder were compared with those of SBS and Crumb Rubber Modified binders. The results showed that wax type I has an effect on strengthening rut resistance as well as improving workability. However, wax type I weaken crack resistance due to making binder harder at intermediate temperature. The results also showed that wax type II has an effect on improving workability and on strengthening crack resistance due to making binder softer.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2012

Surface properties and curing behavior of UV-initiated photopolymerization with and without wax have been investigated by pendulum hardness, pencil hardness, gloss, photo-differential scanning calorimetry (photo-DSC) and SEM. In addition, the influence of wax type (paraffin wax, PE wax) on the various properties of UV cured films was studied. The results showed that the wax type was the significant factor affecting gloss and surface hardness of UV cured films. Specially, the photo-DSC results showed that ${\Delta}H$ for the UV cured films containing paraffin wax was higher than the corresponding values for the formulation without wax and with PE wax. The observed results clearly demonstrate that the photopolymerization of UV curing with paraffin wax in an air atmosphere is less inhibited by the oxygen compared to UV curing without wax and with PE wax.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.670-678
• /
• 2017

Self-emulsifiable polyethylene (PE) wax was prepared using acrylic acid grafted PE wax with potassium hydroxide and various emulsifiers for the economic production of PE wax emulsion. Modification reaction completion was confirmed that the peak from carbonyl group of acrylic acid disappeared and the new peak from carboxylic acid salts appeared in the FT-IR (Fourier transform infrared) spectrum data. Self-emulsifiable properties of the modified PE wax were investigated by the emulsion size and the stability of wax emulsion without any additional emulsifiers. According to self-emulsifiable properties, the emulsion size and stability were varied on the concentration and structure of the emulsifier. The greater emulsion concentration and hydrophilic poly(ethylene oxide) (PEO) characteristics of the emulsifier resulted in the smaller emulsion size and better emulsion stability. In addition, the use of emulsifiers mixture was more effective to obtain smaller size and uniform distribution of emulsion than that of single emulsifier in PE wax modification reaction. Especially, modified PE wax with OAE-5 and LAE-15 emulsifiers mixture shows excellent performance in terms of the smallest emulsion size ($4.34{\mu}m$) and emulsion stability.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.44-49
• /
• 1999

Effects of particulate size and frictional characteristics were examined on the melting behavior of PP (polypropylene) in a batch mixer. Powder and pellet types of PP were used and each component was blended with PE (polyethylene) wax and clay, respectively. It was observed that small size particulates, i.e. powder systems exhibit accelerated melting behavior; and it was also found that the abrasive additive acts as an effective agent for fast melting of PP powder. Retardation of melting due to the reduced friction was observed in PP pellet/PE wax blends, while melting rate of PP powder was increased by addition of PE wax.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.141-147
• /
• 2003

Oxidized polyethylene wax is obtained by oxidation of polyethylene wax and it is composed of various chemicals, e.g., fatty acid, alcohol, ketone and ester. The application of oxidized polyethylene wax is determined by the composition of these chemical substances. In this basic study we observed the basic reaction parameters of time, temperature, oxygen concentration and catalysts on the oxidation reaction of low molecular weight polyethylene(PE wax) by analyzing the acid value, physical and chemical properties of oxidized PE wax to develop a new oxidation process. Acid values are increased with temperature increase in the rage of $150^{\circ}C^{\sim}180^{\circ}C$ but decreased beyond 190$^{\circ}C$. Acid values are also increased with oxygen concentration. As the oxidation reaction proceeds the molecular weight and softening points of oxidation products are decreased by cracking reaction, but the viscosities are increased. To observe the crystallinity of oxidation products SEM experiment was performed. To obtain a high acid-value product in a mild condition, we adopted free radical catalysts and the acid value of the product using catalyst was higher than the product obtained without catalyst in the same reaction condition. The effective initiators were dicumyl peroxide(DCPO), t-butylperoxy-2-ethyl hexanoate(HOPO) and benzoyl peroxide(BPO) having long half-life.

• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.12-18
• /
• 1998

This study was conducted to examine the effect of several postharvest treatments on the storable quality of three apple cultivars, 'Tsugaru', 'jonagold', and 'Hokudo' which are difference in harvest season. Ethylene evolution level showed cultivar-dependent pattern during storage and there was no correlation between the amount of ethylene evolution and storage period among cultivars. Polyethylene film(PE) wrapping was effective in the inhibition of water loss and functional ceramic film was also effective in the prevention of ethylene accumulation inside the wrap during 1 to 3 months of cold storage compared to those of simple PE wrapping. Ethylene scrubber and wax treatment positively contributed to keep the fruit firmness 10% higher than that of control fruit during storage. Waxing enhanced the appearance of 'jonagold' even after simulated marketing period through inhibiting wax accumulation on the fruit surface.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.369-374
• /
• 2015

Grapholita molesta (GM) has been considered as a major problem to apple and peach orchards. Mating disrupters have been applied to control the pest over the world as an Integrated Pest Management [IPM] tool. Various types of dispensers releasing mating disrupters have been developed with different formulation of wax, polyethylene tube and aerosol. In this study, the dispensers that were composed of ester waxes and polypropylene (PP) film were used as dispenser materials to analyze release pattern of GM pheromone compared with paraffin wax and polyethylene (PE) film. The release pattern in PP film group was consistent with time while PE film group irregular. Based on these results, Japan wax_PP film dispenser (Japan_PP) was manufactured and showed the mating disruption effect of 98% during 5months in peach orchard.

• Korean Journal of Agricultural Science
• /
• v.20 no.1
• /
• pp.9-17
• /
• 1993

Postharvest treatments such as polyethylene film wrapping, ethylene scrubber, and fruit coatings were compared to find a potential effect on the fruit quality in 'Fuji' apples during storage and simulated marketing. Polyethylene film wrapping appeared to be excellent in preventing weight loss during storage but fruits lost weight at a high rate when exposed to ambient temperature during simulated marketing. Also, surface cracking disorder was observed in parts of film-wrapped fruit under marketing condition after storage of 21 weeks. Ethylene scrubber effectively removed ethylene in polyetheylene bags but this effect reduced along with the increase of storage time. Although Prolong-treated fruits were good in appearance at 12-week storage, no beneficial effect was found on the inhibition of weight loss during storage as well as marketing. In addition, wax-like substances were accumulated on the surface after storage of 21 weeks, resulting in the reduction of marketability. Water soluble wax seemed highly effective on the inhibition of weight loss during storage and marketing. However, parts of fruit were severely injured probably due to the high concentration of wax. Undamaged fruit showed excellent appearance in shape and flesh quality even after 21 weeks of storage. Further study is required to find the proper concentration of wax.

• Korea-Australia Rheology Journal
• /
• v.13 no.2
• /
• pp.89-95
• /
• 2001

Effects of particulate size and frictional characteristics were examined on the melting behavior of PP(polypropylene) in a twin screw extruder. Powder and pellet types of PP were used and each component was blended with PE(polyethylene) wax and clay, respectively. It was observed that small size particulates, 1.e. powder systems exhibit accelerated melting behavior; and it was also found that the abrasive auditive acts as an effective agent for fast melting of PP powder. Retardation of melting due to the reduced friction was observed in both types of PP, contrary to the result found in a batch mixer. The tendency observed in variation of torque and exit temperature was explained in terms of frictional effect and length of compacted region formed during evolution of melting.

• Journal of Technologic Dentistry
• /
• v.41 no.4
• /
• pp.255-262
• /
• 2019

Purpose: Recently, the production technology of dental prosthesis using 3D Printer workpeices has been developed. However, the lack of information on the work processes and casting techniques of materials for 3D printing casting is expected to require research. Therefore, in this study, we intend to cast a Dental DLP 3D Printer workpiece, which is being commercialized, to identify its appearance and internal clearance, and to observe its castability. Methods: Castability of the 3D Printer workpiece was evaluated. The specimen is prepared in a cylindrical shape and in a 1 mm thick coping shape. The control specimen is made of wax and the experimental specimen is made of resin using two types of 3D printers. After casting, the appearance of the casting body was observed and the internal clearance of the coping was measured. Results: RP1 and RP2, cylindrical specimens, were partially cast or fin. When coping-type specimens were measured before casting, the internal clearance of PE2 was more accurate than that of PC and PE1. When coping-type specimens were measured after casting, CE1 was the most accurate in occlusal clearance and CE2n was the most accurate in axial clearance. Conclusion: 1. Exterior observations of the casting body indicated casting defects and fins. 2. Internal clearance observations show that the occlusal clearance of the castings is larger after casting, and the axial clearance of the castings is smaller after casting. 3. It is judged that the RP2 specimen is more likely to be applied for casting than the RP1 specimen.