• Journal of computational fluids engineering
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2017

The mixing of water and chemicals is an important process in the water purification plant. In this paper, we compare PDM(pump diffusion mixer) and hydraulic mixer at the basin in the mixing process. The proper flow rates are predicted and compared in both mixers using CFD technique. As a result, the flow rate of purifier chemical liquid should be 5% of that of water for the optimal performance of mixing process. The characteristics of the two mixing methods are compared with each other for strong and weak points on the operation of the purification system, discussed in the view point of CFD simulations.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.139-142
• /
• 2002

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM) voltage control for Ozone Generator are described. For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant. The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc., PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with 6.5[kHz], 1.8[kW] inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.

• Korean Journal of Human Ecology
• /
• v.5 no.2
• /
• pp.33-43
• /
• 2002

This study was investigated textural properties of Injulmi affected by milling methods, varieties and added water volume. Sinsunchalbyeo and Hwasunchalbyeo flours were made using Rin-dry milling(PDM) and roll-wet milling(RWM) methods. The proximate composition of waxy rice starches and waxy rice flours were similar. Water binding capacity, soluble carbohydrate and damaged starch of waxy rice flour by RWM: were higher than those of waxy rice flours by PDM. By increasing added water volume, hardness and adhesiveness of Injulmi were decreased. By increasing storage time, hardness of Injulmi was increased, but adhesiveness was decreased. The hardness of Injulmi made from waxy rice flours by PDM was higher than by RDW.

• IE interfaces
• /
• v.10 no.3
• /
• pp.23-31
• /
• 1997

Exchange of product model data becomes a key issue in the globalized enterprise environment. Sharing heterogeneous information resides in diverse information resources is not easy. To share automotive product information among different organizations, a reliable neutral information standard and communication methods are needed. World wide sharing of automotive product information can be implemented based on the STEP AP214, the standard for exchange of automotive product model through its whole life cycle. This paper suggests an automotive PDM implemented on the internet and based on the STEP AP214. Physical files containing design data can be shared on the internet using JAVA applets and VRML.

• Journal of Adhesion and Interface
• /
• v.3 no.1
• /
• pp.9-12
• /
• 2002

In this paper, N,N-m-phenyenedimaleimide (m-PDM), Polyamide Resin (PI) and Metallic dimethacrylate etc. influencing the heat resistance of anaerobic adhesive has been studied, an anaerobic adhesive composition capable of post-cure expansion and $230^{\circ}C$ temperature resistance comprising a multifunctional methacrylate and m-PDM capable of effectuating expansion upon post-cure has been developed. A homogeneous mixture of a monomer and m-PDM are subjected to a first cure heat stage (Room Temperature) wherein a rigid partially-cured plastic is formed and a post-cure heat stage ($150^{\circ}C$) to effectuate permanent expansion of cured adhesive composition.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.52-54
• /
• 2002

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM) voltage control for plasma sterilization are described, For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant. The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc.. PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with 6.5[kHz], 1.8[kW] inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1906-1908
• /
• 2003

본 연구는 biosensor용 microchannel 제작에 사용되는 PDMS의 표면 개질화와 표면 환원 현상을 해결 하기위한 co-polymer를 이용한 표면 처리특성에 관한 연구이다. PDMS 와 PDMS co-polymer의 표면 개질화를 위해 $O_2$ RF Plasma를 사용하였으며 10W, 1.5sccm의 분위기 하에서 표면 처리 공정을 수행하였다. 실험에 사용된 co-polymer는 소수성과 친수성의 성질을 동시에 갖는 triton x-100과 PDMS를 혼합하여 제작하였다. 각각 흔합비(0.5:100, 1:100, 1.5:100, 2:100)가 다른 시료를 제작하여 플라즈마 표면처리공정을 통해 표면처리를 하였으며, 표면 처리된 PDMS의 표면 특성변화에 비교 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1172-1174
• /
• 2003

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM)voltage control for plasma sterilization are described. For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant. The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc., PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1914-1916
• /
• 2003

최근 PDMS를 이용한 미세구조물의 제작을 통한 LOC(lap-on-a-chip) 개발에 대한 연구가 많이 진행되고 있다. 본 연구에서는 PDMS와 여러기판(유리와 실리콘) 사이의 접합 공정에 관한 연구를 하였으며, 특히 PDMS 표면의 물리적, 화학적 변화와 접합 특성과의 관계를 고찰하였다. $O_2$ 플라즈마를 사용하여 표면 처리된 기판의 표면에너지를 접촉각 측정방식으로 측정하였다. 또한 XPS를 이용하여 표면의 화학조성 변화 관찰하였으며, AFM으로 플라즈마 도즈량에 따른 표면 거칠기를 조사하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.397-401
• /
• 2003

A resonant type voltage source and power device and a control method using Pulse Density Modulation(PDM) power control and Pulse Width Modulation(PWM) voltage control for plasma sterilization are described. For the stability of discharge in the generating tube, it is desirable that the peak apply voltage is constant The PDM power control is employed for sustaining the voltage constant at any generating tube input power. Moreover, to avoid the influence of input AC voltage fluctuation etc., PWM voltage control with generating tube peak voltage feedback is used. Both functions were confirmed by the experiment with 6.5[㎑], 1.8[㎾] inverter and generating tube. The effect of input synchronous PDM method for input current stabilizing is confirmed also.