• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1047-1053
• /
• 2009

The future use of hydrogen as an energy source is expected to increase on account of its environmentally friendliness. In order to enhance the production of hydrogen, Pd ions (0.01, 0.05, 0.1, and 0.5 mol%) were incorporated $TiO_2$ (Pd-$TiO_2$) and used as a photocatalyst. The UV-visible absorbance decreased with increasing level of palladium incorporation without a wavelength shift. Although all the absorption plots showed excitation characteristics, there was an asymmetric tail observed towards a higher wavelength caused by scattering. However, the intensity of the photoluminescence (PL) curves of Pd-$TiO_2$ was smaller, with the smallest case being observed at 0.1 and 0.5 mol% Pd-$TiO_2$, which was attributedto recombination between the excited electrons and holes. Based on these optical characteristics, the evolution of $H_2$ from methanol/water (1:1) photo-splitting over Pd-$TiO_2$ in the liquid system was enhanced, compared with that over pure $TiO_2$. In particular, 2.4 mL of $H_2$ gas was produced after 8 h when 0.5 g of a 1.0 mol% Pd-$TiO_2$ catalyst was used. $H_2$ was stably evolved even after 28 h without catalytic deactivation, and the amount of $H_2$ produced reached 14.5 mL after 28 h. This is in contrast to the case of the Pd 0.1 mol% impregnated $TiO_2$ of $H_2$ evolution of 17.5 mL due to the more decreasedelectron-hole recombination.

• Korean Journal of Microbiology
• /
• v.23 no.2
• /
• pp.115-121
• /
• 1985

Five representative virulent phages (J1, TK93, K1, PD5, and CP1) and one temperate phage (.phi.1043) of Lactobacillus casei were compared to each other by analyzing the agarose gel electrophoretic patterns of restriction enzyme-digested phage DNAs. Nucleic acids of all the tested phages were double stranded DNA. DNAs of J1, TK93, K1, and ${\phi}$ 1043 phages had a size of about 42kb, but the size of PD5 and CP1 DNAs was avout 140kb. J1, TK93, K1, PD5, CP1, and ${\phi}$ 1043 DNAs were digested to 13, 13, 11, 14, 14, and 12 fragments by EcoR1, respectively, and showed its characteristec restriction patterns. Cohesive ends were present in J1, TK93, and ${\phi}$ 1043, but were absent in K1, PD5, and CP1. Restriction maps of J1 and TK93 DNAs showed nearly complete homology and their evolutionary relationship based upon the restriction analysis was discussed.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.109-113
• /
• 2001

Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.21-35
• /
• 1997

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy is cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-20Pd-20Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electic furace and centrifugal casting machine in Ar atmoshpere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age-hardening characteristics of the small Au-containing Ag-pPd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, emergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, I. e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the Llo type face centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affedted by the Cu concentration. In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase(L1o type) and an Agrich ${\alpha}2$ phase occurred and a discontiunous precipitation occurred at the grain boundary. Form the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}\to{\alpha}+{\alpha}2+PdCu\to{\alpha}1+{\alpha}2+PdCu$ at Pd/Cu = 1 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.394-408
• /
• 2024

Purpose To develop models to predict programmed death ligand 1 (PD-L1) expression in pulmonary squamous cell carcinoma (SCC) using CT. Materials and Methods A total of 97 patients diagnosed with SCC who underwent PD-L1 expression assay were included in this study. We performed a CT analysis of the tumors using pretreatment CT images. Multiple logistic regression models were constructed to predict PD-L1 positivity in the total patient group and in the 40 advanced-stage (≥ stage IIIB) patients. The area under the receiver operating characteristic curve (AUC) was calculated for each model. Results For the total patient group, the AUC of the 'total significant features model' (tumor stage, tumor size, pleural nodularity, and lung metastasis) was 0.652, and that of the 'selected feature model' (pleural nodularity) was 0.556. For advanced-stage patients, the AUC of the 'selected feature model' (tumor size, pleural nodularity, pulmonary oligometastases, and absence of interstitial lung disease) was 0.897. Among these factors, pleural nodularity and pulmonary oligometastases had the highest odds ratios (8.78 and 16.35, respectively). Conclusion Our model could predict PD-L1 expression in patients with lung SCC, and pleural nodularity and pulmonary oligometastases were notable predictive CT features of PD-L1.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.147-153
• /
• 2005

Naldrettite, recently discovered in the Mesamax Northwest deposit, Ungava region, northern Quebec, Canada, was reported as a new mineral. In order to confirm whether itis a natural equivalent of synthetic $Pd_2Sb$ phase or not, the pure $Pd_2Sb$ phase has been synthesized and investigated by reflected microscope, electron microprobe analyser, X-ray diffractometer, and micro-indentation hardness tester. Under reflected light synthetic $Pd_2Sb$ Phase is white with a creamy tint in both air and oil and weakly bireflectant. Anisotropism is strong, from brownish gray to greenish blue in air. Micro-indentation hardness test gives VHN100=293(242-322). Composition of the phase is $63.7\~64.3wt.\%\;Pd\;and\; 36.4\~36.8wt.\%$ Sb, and is entirely consistent. The phase, quenched from $500^{\circ}C$, is orthorhobic with space group $Cmc2_1$, and the cell parameters are a=3.366(1), b=17.523(3), c=6.929(2) ${\AA}$. All mineralogical properties of synthetic $Pd_2Sb$ compare very well with those of naldrettite, confirming that naldrettite is the natural analogue of the synthetic $Pd_2Sb$ phase.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1999

Pd-ceramic composite membranes and catalytic membrane reactors(CMR) have been studied for hydrogen and its isotopes (deuterium and tritium) purification and recovery in the fusion reactor fuel cycle. Particularly a closed-loop process has been studied for recovering tritium from tritiated water by means of a CMR in which the water gas shift reaction takes place. The development of the techniques for coating micro-porous ceramic tubes with Pd and Pd/Ag thin layers is described : P composite membranes have been produced by electroless deposition (Pd/Ag film of 10-20 $\mu$m) and rolling of thin metal sheets (Pd and Pd/Ag membranes of 50-70 $\mu$m). Experimental results of the electroless membranes have shown a not complete hydrogen selectivity because of the presence of some defects(micro-holes) in the metallic thin layer. Conversely the rolled thin Pd and Pd/ag membranes have separated hydrogen from the other gases with a complete selectivity giving rise to a slightly larger (about a factor 1.7) mass transfer resistance with respect to the electroless membranes. Experimental tests have confirmed the good performances of the rolled membranes in terms of chemical stability over several weeks of operation. Therefore these rolled membranes and CMR are adequate for applications in the fusion reactor fuel cycle as well as in the industrial processes where high pure hydrogen is required (i.e. hydrocarbon reforming for fuel cell)

• Parasites, Hosts and Diseases
• /
• v.60 no.1
• /
• pp.15-23
• /
• 2022

Erythrocytes deficient in glucose-6-phosphate dehydrogenase (G6PD) is more susceptible to oxidative damage from free radical derived compounds. The hemolysis triggered by oxidative agents such as primaquine (PQ) is used for the radical treatment of hypnozoites of P. vivax. Testing of G6PD screening before malaria treatment is not a common practice in Thailand, which poses patients at risk of hemolysis. This retrospective study aimed to investigate the prevalence of G6PD in malaria patients who live in Southern Thailand. Eight hundred eighty-one malaria patients were collected for 8-year from 2012 to 2019, including 785 (89.1%) of P. vivax, 61 (6.9%) of P. falciparum, 27 (3.1%) of P. knowlesi, and 8 (0.9%) of mixed infections. The DiaPlexC genotyping kit (Asian type) and PCR-RFLP were employed to determine the G6PD variants. The result showed that 5 different types of G6PD variants were identified in 26 cases (2.9%); 12/26 (46.2%) had Mahidol (487G>A) and 11/26 (42.3%) had Viangchan (871G>A) variants, while the rest had Kaiping (1388G>A), Union (1360C>T), and Mediterranean (563C>T) variants. G6PD Songklanagarind (196T>A) variant was not found in the study. Our result did not show a significant difference in the malaria parasite densities in patients between G6PD-deficient and G6PD-normal groups. According to our findings, testing G6PD deficiency and monitoring the potential PQ toxicity in patients who receive PQ are highly recommended.

• Korean Journal of Biological Psychiatry
• /
• v.16 no.1
• /
• pp.46-52
• /
• 2009

Objectives : The goal of this study was to compare the clinical characteristics of panic disorder respiratory subtype(PD-R) and non-respiratory subtype(PD-NR). Methods : 84 patients with panic disorder were enrolled and divided into 2 groups, 29 PD-R and 55 PD-NR. Diagnosis of panic disorder was evaluated using Diagnostic and Statistical Manual of Mental Disorders $4^{th}$ edition and Mini International Neuropsychiatric Interview. They were also measured with Hamilton Rating Scale for Anxiety(HAM-A), Hamilton Rating Scale for Depression(HAM-D), and Panic Disorder Severity Scale (PDSS). Results : PD-R group showed significantly higher scores in PDSS than those of PD-NR group(p=.027). After controlling for the severity of panic disorder and gender, PD-R group showed higher HAM-D and somatic anxiety subscale of HAM-A than those of PD-NR group. Furthermore, results of logistic regression analysis suggested that the somatic anxiety was a possible risk factor of PD-R(OR=1.404,p=0.009). Conclusion : These results suggest that somatic anxiety and depressive symptom would be important clinical characteristics of PD-R.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2533-2536
• /
• 2008