• 전자공학회논문지B
• /
• 제29B권9호
• /
• pp.76-87
• /
• 1992

A novel self-organizing fuzzy plus PD control algorithm is proposed, where the proposed controller consists of a typical fuzzy reasoning part and self organizing part in which both on-line and off-line algorithms are employed to modify the Look-Up Table(LUT) for the fuzzy control rules and to decide how much fuzzy rules are to be modifid after evaluating the control performance, respectively. And the fuzzy controller is replaced by a PD controller in a prespecified region nearby the set point for good settling actions, where gain parameters are determined by fuzzy rules based on the magnitude of error velocity at the instant when the output penetrates into the prespecified region. To show the effectiveness of the proposed controller, extensive computer simulation results as well as experimental results are illustrated for an inverted pendulum system.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1265-1272
• /
• 2019

본 논문에서는 상수 입력지연을 갖는 이산시간 선형시스템을 위한 기존의 예측기 피드백 제어기의 구조적 모델 불확실성에 대한 강인성을 해석한다. 상수 입력지연을 1차 PdE (Partial difference Equation)로 모델링하여 입력지연을 PdE 상태변수로 대체하고 백스테핑 변환을 적용하여 목표 시스템을 구축한다. 목표 시스템을 기반으로 전체 상태변수를 포함하는 명시적 리아푸노프 함수를 구성하여 안정성이 유지되는 구조적 모델 불확실성의 최대 크기의 존재를 증명하고 예측기 피드백 제어기의 강인성을 확립한다. 모의실험을 통하여 모델 불확실성이 존재하는 경우에도 닫힌 루프 시스템의 안정성이 유지되는 것을 예증하고 예측기 피드백 제어기의 강인성을 검증한다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.411-419
• /
• 1998

In this paper the steady-state genetic algorithm is applied for the optimal design of fuzzy PID controllers. Basically the structure of the discussed fuzzy PID controller is extended from the conventional fuzzy PI and PD controllers where only a two-dimensional rule base of the fuzzy PID controller are designed simultaneously. Simulations results shows the superior performance of this optimal designed fuzzy PID controllers to the optimal designed conventional fuzzy PI and PD controllers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.97-98
• /
• 2016

본 논문은 위치, 속도, 전류 제어기들이 직렬로 연결된 전동기 구동시스템에서 속도 제어기를 사용하지 않는 위치 제어를 위한 PI-PD 제어기 설계법을 제안한다. 기존의 PI-PD 위치 제어기 설계법과 달리 제안된 제어기의 설계법은 위치 제어기의 대역폭에 따라 이득 값을 설정할 수 있다. 제안된 위치 제어기 설계 성능을 검증하기 위해 IPMSM 구동시스템에서 실험을 통해 유효성을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.536-539
• /
• 2004

In this paper, a brief discussion on I-PD position controller design for step motor drive is presented. The proposed method mainly focuses on the robustness property of the controller, which is very important for this type of system in which the variation of external load affects plant parameters. It is considered in this paper that two types of controller design methods namely; Coefficient Diagram Method (CDM), and arbitrary Pole Assignment Method (PAM) are treated and compared them. The control plant chosen for our study is a SM inherently is comprised of some non-linear elements. A the scope of the design method is limited to only linear time invariant systems, the SM modeling is approximated to linear system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.370-372
• /
• 2004

This paper addresses the wavelet-based fuzzy PI/PD controller design using DNA coding method. A structure of fuzzy controller model is adopted as the wavelet transform of which the coefficients are identified. The proposed method overcomes some mathematical limits of conventional methods by using the fuzzy logic that is optimized by DNA coding method. The feasibility of the proposed fuzzy controller design scheme is verified by applying to the servo control of the optical disk drive.

• 제어로봇시스템학회논문지
• /
• 제7권11호
• /
• pp.918-926
• /
• 2001

In this paper, intelligent control method using neural network as a nonlinear controller is presented. Simulation studies for three link rotary robot are performed. Neural network controller is implemented on DSP board in PC to make real time computing possible. On-line training algorithms for neural network control are proposed. As a test-bed, a large x-y table was build and interface with PC has been implemented. Experiments such as inverted pendulum control and large x-y table position control are performed. The results for different PD controller gains with neural network show excellent position tracking for circular trajectory compared with those for PD controller only. Neural control scheme also works better for controlling inverted pendulum on x-y table.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1099-1102
• /
• 1996

In this paper, roll/yaw attitude control of spacecraft using a double gimbaled wheel is discussed with two feedback controllers designed. One is a PD controller with no phase difference between roll and yaw control input. The other is a PD controller with a phase lag compensator about the yaw control input. The phase lag compensator is designed as a first order system and a lag parameter is designed for the yaw angle control. There are two case simulations for each controller ; constant disturbance torques and initial errors of nutation at motion. We obtain the results through simulations that steady-state error and rising time of yaw angle are determined by the compensator. Simulation parameters used in this study are the values of KOREASAT F1.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.914-922
• /
• 1999

A study on the improvement of tracking performance of a 3 DOF planar parallel manipulator is performed. A class of adaptive tracking control sheme is designed using self tuning adaptive fuzzy logic control theory. This control sheme is composed of three classical PD controller and a multi learning type self tuning adaptive fuzzy logic controller set. PD controller is tuned roughly by manual setting a priori and fuzzy logic controller is tuned precisely by the gradient descent method for a global solution during run-time, so the proposed control scheme is tuned more rapidly and precisely than the single learning type self tuning adaptive fuzzy logic control sheme for a local solution. The control performance of the proposed algorithm is verified through experiments.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.768-773
• /
• 2013

In this paper, decoupled course, depth and roll controller design for an Autonomous Underwater Vehicle (AUV) and its performance test results are presented. Control system design is done using the PD control scheme based on a mathematical model of the AUV. Details of system implementation are given and the results of simulations and experiments using the prototype vehicle model are discussed. The designed controller was successfully applied to the nonlinear and coupled system under non-ideal actuator conditions.