• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.65-71
• /
• 2016

Currently developing the OBC of the next-generation LEO satellite by Korea Aerospace Research Institute adopts the LEON2-FT/AT697F processor to achieve high performance. And various communication devices such as SpaceWire, MIL-STD-1553B, DMAUART and CAN Master are integrated to the separated standard communication FPGAs within the OBC, where they can be controlled by the processor and flight software (FSW) through PCI interface. The Actel 1553BRM IP core is used for the 1553B in the next-generation LEO OBC and the B1553BRM wrapper from Aeroflex Gaisler is used for connecting it to the AMBA bus in FPGA. This paper presents the design and development of PCI-based 1553B communication software, and describes the handling mechanism of 1553B operation in FSW task level. Also it shows the test results on real-hardware and simulator.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.492-502
• /
• 2002

The dapped ends of the Gerber's beam were designed by PCI(Prestressed Concrete Institute) and CPCI(Canadian Prestressed Concrete Institute) methods. The depths of nibs with precast and topping concrete, which were halves of the total beam depth, were 77 cm md 18.2 cm, respectably. Shear tests were performed on four full scale beam ends. All specimens designed by PCI and CPCI methods showed crackings at the re-entrant coner of dap before the 32 ％ of full service design loading, and failed at the load level higher than their design strength but less than their calculated nominal strength. The specimens with increased hanger reinforcement show more effective in development of initial crackings, more ductile in failure with distributed crackings, and failed in higher strength than those of PCI requirement. The tested specimens designed by CPCI method were more ductile in failure than those of the PCI methods.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.65-68
• /
• 2002

The verification of software part and HW/SW interface suffer from the absence of the hardware platform at the end of partitioning and coding phase in design cycle. In this paper we present the design of easy verification for hardware design. Hardware and software engineer can verify their software program and hardware design for a chip that is emulated in proposed verification environment. Besides, designer can easily design the DEMO system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.25-29
• /
• 2008

The CORBA that supports FPGA has not been used generally and it is difficult to implement and to develop the CORBA for FPGA. In this paper we propose the way to design FPGA to support a CORBA component. For FPGA to support the CORBA component, embedded processor provided by FPGA and PCI based CORBA is utilized. The PCI based CORBA is for improving data transfer throughput. This paper will be organized as follows. In Chapter I, existing research trend and background are presented for why we propose design of FPGA that support the CORBA component. In Chapter II, FPGA design for supporting CORBA components is proposed and described in detail. In Chapter III, simple experiment is tested to confirm the proposed FPGA design. Finally session 4 is conclusion of this paper.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.39-49
• /
• 2006

This paper proposes an efficient verification environment of PCI Express controller that is the future I/O interface. This verification environment consists of a test vector generator, a test bench, and two abstract memories. We also define the assembler set to generate the verification scenarios. In this paper, we propose the random test environment which consists of a random vector generator, a .simulator part, and a compare engine. This verification methodology is useful to find the special errors which are not detected by the basic-behavioral test and hardware-design test.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.4 s.304
• /
• pp.59-68
• /
• 2005

In this paper, we design a PCI Express controller for future communication system The controller supports the full functionality of Transaction Layer and Data Link Layer of PCI Express. The designed controller has the proposed transmitter buffer architecture to obey Replay mechanism. This scheme merges the transmitting buffer and the replay buffer. The proposed buffer has the higher data transfer efficiency than the conventional buffer architecture because it can dynamically adjust size of a replay buffer space. We also design transmitter of Transmitter Transaction Layer to effectively support the proposed buffer, The receiver device of PCI Express must possess the buffer for three types of transaction to support Flow Control. And it must report the amount of the buffer space regularly to the Port at the opposite end of the link. We propose the simple receiver buffer scheme using only one buffer to easily support Flow Control. And the designed controller is verified under proposed test bench

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.58-61
• /
• 2016

.PCI Express는 고속, 저전력 등의 특성으로 업계 표준으로서 많이 쓰이고 있는 프로세서와 주변 I/O 장치들을 연결하는 버스 기술이다. 또한, PCI Express는 인피니밴드와 이더넷과 더불어 고성능 컴퓨터나 컴퓨터 클러스터를 위한 시스템 인터커넥트 기술로 널리 쓰이고 있다. PGAS(partitioned global address space) 프로그래밍 모델은 컴퓨터 클러스터와 같은 다중 호스트 시스템에서 단측 RDMA(remote direct memory access)를 구현하는데 많이 이용된다. 본 논문에서는 PCI Express 기반 RDMA를 구현하기 위해 PGAS 프로그래밍 모델인 OpenSHMEM의 기존의 특징을 유지하여 PCI Express 기반 OpenSHMEM API를 설계 및 구현하였다. 구현한 OpenSHMEM API는 PCI Express의 NTB(non-transparent bridge) 기술로 2대의 PC를 연결한 시스템에서 매트릭스 곱셈 예제를 통하여 실험하였다.

• Journal of Korean Academy of Nursing
• /
• v.47 no.6
• /
• pp.756-769
• /
• 2017

Purpose: To identify the effects of a smart program for the patients who underwent percutaneous coronary intervention (SP-PCI) on coronary disease-related knowledge, health behaviors, and quality of life. Methods: A nonequivalent control group with a non-synchronized design was utilized and 48 participants (experimental=22, control=26) were recruited from a university hospital in Gyeongsang area from May to December, 2016. The 12-week SP-PCI consisted of self-study of health information using smart phone applications (1/week), walking exercise (>5/week) using smart band, feedback using Kakao talk (2/week), and telephone counseling (1/week). Patients in the control group received usual care from their primary health care providers and a brief health education with basic self-management brochure after the PCI. Data were analyzed using the SPSS 21.0 program through descriptive statistics, $x^2$ test, and t-test. Results: After the 12-week SP-PCI, the experimental group showed higher levels of coronary disease-related knowledge (t=2.43, p=.019), heart-related health behaviors (t=5.96, p<.001), regular exercise (Z=-4.47, p<.001), and quality of life-MCS (t=3.04, p=.004) and showed lower levels of stress (Z=-3.53, p<.001) and sodium intake (t=-4.43, p<.001) than those in the control group. There were no significant group differences in medication adherence and food intake in total energy, lipids, and cholesterol. Conclusion: The suggested SP-PCI provided easy access and cost-effective intervention for patients after PCI and improved their knowledge of the disease, performance of health behaviors, and quality of life. Further study with a wider population is needed to evaluate the effects of SP-PCI on disease recurrence and quality of life for patients after PCI.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.46-53
• /
• 2001

Two full scale precast pretensioned dapped ended rectangular beams designed by PCI design handbook for a major domestic live load of market and parking building - 500kgf/㎡ and 1,200kgf/㎡ were investigated experimentally. The bottom length of beams was 60cm which was same to the length of rectangular column in the base of five-story market or parking buildings. The height of dap was web hight plus half of the flange height within the allowable limit of PCI method. Shear tests were performed on four beam ends. Followings were obtained from the experimental study. All of the specimens were fully complied with the PCI design handbook. Two of four specimens which were designed for live load of 1,200kgf/㎡ showed crackings at the re-entrant corner of dap before the full service loadings, and failed by direct shear at the load level much less than their calculated nominal strength. The specimens designed for live load of 1,200kgf/㎡ failed at 772 tonf and 78.36tonf by direct shear crackings. This strength was less than PCI limit of 81.9 tonf and higher than ACI limit of 65.62tonf. Thus, the limit suggested by ACI seems more reasonable in regard of safety in view of this test results. According to load-strain curves, the strain of hanger reinforcement reached almost yield strain. It is recommended to use more inclined hanger reinforcement of improve the strength and serviceability.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.1
• /
• pp.1-13
• /
• 2015

Despite recent progresses in nanoparticle-based drug delivery systems, there are still many unsolved limitations. Most of all, a major obstacle in current nanoparticle-based drug carrier is the lack of sufficient drug delivery into target cells due to various biological barriers, such as: extracellular matrix, endolysosomal barrier, and drug-resistance associated proteins. To circumvent these limitations, several research groups have utilized photochemical internalization (PCI), an extension of photodynamic therapy (PDT), in design of innovative and efficient nano-carriers drug delivery. This review presents an overview of a recent research on utilization of PCI in various fields including: anti-cancer therapy, protein delivery, and tissue engineering.