• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.370-373
• /
• 2005

We have developed Hybrid algorithm for yellow sand detection. Hybrid algorithm is composed of three methods using infrared bands. The first method used the differential absorption in brightness temperature difference between $11\mu m\;and\;12\mu m$ (BID _1), through which help distinguish the yellow sand from various meteorological clouds. The second method uses the brightness temperature difference between $3.7\mu m\;and\;11\mu m$ (BID_2). The technique would be most sensitive to dust loading during the day when the BID _2 is enhanced by reflection of $3.7\mu m$ solar radiation. The third one is a newly developed algorithm from our research, the so-called surface temperature variation method (STY). We have applied the three methods to MODIS for derivation of the yellow sand dust and in conjunction with the Principle Component Analysis (PCA), a form of eigenvector statistical analysis. PCI shows better results for yellow sand detection in comparison with the results from individual method. The comparison between PCI and MODIS aerosols optical depth (AOD) shows remarkable good correlations during daytime and relatively good correlations over the land.

• Journal of Yeungnam Medical Science
• /
• v.33 no.1
• /
• pp.52-55
• /
• 2016

Guide wire fracture during percutaneous coronary intervention (PCI) is rare. It can cause fatal complications such as thrombus formation, embolization, and perforation. Guide wire fracture could occur during intervention for severely calcified stenotic lesions, and rarely from distal small branches of stenotic lesions. There are several methods for its management depending on the material character, position, length of the remnant, and the patient's condition. If percutaneous retrieval was not achieved, the surgical procedure should be considered for prevention of potential risks, although the remnant guide wire does not usually cause complications. We experienced a patient with a guide wire fracture during PCI, and managed to prevent its complications through surgical removal of the remnant wire. We report this case here.

• Journal of Chest Surgery
• /
• v.41 no.6
• /
• pp.768-771
• /
• 2008

The use of IVUS provides information about the lumen and arterial wall, the location and extent of atherosclerotic plaque and the state of the arterial wall after PCi. The use of IVUS after insertion of an intracoronary stent has currently increased, while conflicting evidence exists concerning the long-term benefits of IVUS. We report here on a case of surgical removal of an entrapped and fractured IVUS catheter during insertion of intracoronary stents, and we include a review of the relevant literature.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2685-2686
• /
• 2004

심자도(Magnetocardiography: MCG)는 심장에서 발생하는 자기신호로 크기가 수 pico Tesla에서 수 femto Tesla 정도로 지구 자기에 비하여 $10^{-6}{\sim}10^{-10}$ 정도로 매우 작기 때문에 보통 3층의 차폐 막 구조로 되어 있는 자기차폐실을 사용하여 외부 잡음을 줄인다. 그러나 자기차폐실의 비용이 크기 때문에, 자기차폐실의 비용을 줄이고 다양한 신호처리를 병행하여 신호대 잡음비를 높이고 있다. 본 논문에서는 1Giga FLOPS (FLoating point Operationals Per Second)의 부동 소숫점 연산능력을 가진 TMS320C6701을 사용하여 실시간 신호처리가 가능한 신호처리 시스템을 설계하였다. 개발된 DSP 보드는 PCI-bus 기반으로 설계하여 신호 측정 컴퓨터에 내장이 가능하도록 하였다. 프로그램과 데이터 처리를 위한 외부 메모리를 장착하였고, PCI 콘트롤러를 갖추어 PC 와의 대용량 메모리 공유가 가능하도록 하였다. 제작된 DSP 보드를 사용하여, 심자도 신호에서 실시간으로 적응 잡음 소거 및 필터링을 구현하여 신호대 잡음비의 향상을 확인할 수 있었다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.984-990
• /
• 2013

Pick and placement systems need high speeds and reliability for the position alignment process of semiconductor packages in picking up and placing them on placement trays. Image processing is usually adopted for position aligning where finding out the most suitable method is considered most important aspect of the process. This paper proposes a method for judging the performance of different image processing algorithms based on the PCI (Process Capability Index). The PCI is an index which represents the error distribution acquired from many experimental data. The bigger the index, the more reliable the results or the lower the deviation. Two compared and candidate methods are Hough Transform and PCA (Principal Component Analysis), both of which are very suitable for oblong or rectangular type packages such as BGA's. Comparing the two approaches through a CPI with enough experimental results leads to the conclusion that the PCA is much better than the Hough Transform in not only reliability, but also processing speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.236-240
• /
• 2004

We have implemented image monitoring system on PXA255 processor based embedded board that is ported QT/Embedded 2.3.7 version. User is able to monitor camera's capture image for widely separated host PC at client PXA255 board target board by ethernet communication method. And we designed PCI interface card that control motor for camera's Pan & Tilt. Bitmap format's images of $320\times{240}$ size are displayed on PXA255 board's TFT-LCD and User is able to monitor wanted position's image by touch screen input method.

• Health Policy and Management
• /
• v.21 no.4
• /
• pp.541-564
• /
• 2011

This study aimed to investigate health outcome of acute myocardial infarction (AMI) patients such as mortality and length of stay in hospital and to identify factors associated with the health outcome according to the comorbidity index. Nation-wide representative samples of 3,748 adult inpatients aged between 20-85 years with acute myocardial infarction were derived from the Korea National Hospital Discharge Injury Survey, 2005-2008. Comorbidity index was measured using the Charlson Comorbidity Index (CCI). The data were analyzed using t-test, ANOVA, multiple regression, logistic regression analysis in order to investigate the effect of comorbidity on health outcome. According to the study results, the factors associated with length of hospital stay of acute myocardial infarction patients were gender, insurance type, residential area scale, admission route, PCI perform, CABG perform, and CCI. The factors associated with mortality of acute myocardial infarction patients were age, admission route, PCI perform, and CCI. CCI with a higher length of hospital stay and mortality also increased significantly. This study demonstrated comorbidity risk adjustment for health outcome and presented important data for health care policy. In the future study, more detailed and adequate comorbidity measurement tool should be developed, so patients' severity can be adjusted accurately.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.255-263
• /
• 2010

The research developes short-run standardized control charts(SSCC) and short-run acceptance control charts(SACC) under the various demand patterns. The demand patterns considered in this paper are three types such as high-variety and repetitive low-volume pattern, extremely-high-variety and nonrepetitive low-volume pattern, and high-variety and extremely-low-volume pattern. The short-run standardized control charts developed by extending the long-run ${\bar{x}}$-R, ${\bar{x}}$-s and I-MR charts have strengths for practioners to understand and use easily. Moreover, the short-range acceptance control charts developed in the study can be efficiently used through combining the functions of the inspection and control chart. The weighting schemes such as Shewhart, moving average (MA) and exponentially weighted moving average (EWMA) can be considered by the reliability of data sets. The two types according to the use of control chart are presented in the short-range standardized charts and acceptance control charts. Finally, process capability index(PCI) and process performance index(PPI) classified by the demand patterns are presented.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.294-299
• /
• 1994

Margin benefits are quantatively assessed when a Digital Monitoring System(DMS) is assumed to be installed to an operating Westinghouse analog type plant. Applied plant and cycle is YongGwang Unit 1 Cycle 6. The referenced digital monitoring system is the COLSS (Core Operating Limit Supervisory System) of ABB-CE. Considered fuel design limits are DNBR and LDCA Fq. 2003-D Power distributions within the present CAOC (Constant Axial Offset Control) limits are calculated for the analysis. The most limiting DNB prevention event of CEA Withdrawal is analyzed with the ROPM (Required OverPower Margin) concept of ABB-CE. The result show that the DMS can bring around 7% more margins for both DNB and LOCA Fq standpoints of view. The DMS can also monitor the PCI (Pellet-Cladding Interaction) limits.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.543-544
• /
• 2006

This paper describes a simple real-time monitoring system for use in measurement subsystem of contact wire and geometry of overhead contact wire in electric railway. The system has been consists of a high speed CMOS camera with resolution $1024\;{\times}\;1280$ pixels, line type laser source with a power equal to 300 mW, and PC-based image acquisition system with PCI Express slot. National instrument LabVIEW (8.0) and vision acquisition software have been used in application programming interface for image acquisition, display, and storage with a frequency of sampling of 500 acquisitions per second.