• 자원리싸이클링
• /
• 제17권2호
• /
• pp.46-54
• /
• 2008

폐 컴퓨터나 OA기기 중 PCB (Printed Circuit Board)에는 귀금속을 포함한 많은 양의 금속성분이 함유되어 있으며, 본 연구에서는 이들을 분리회수하기 위한 건식처리 기술을 검토하였다. 폐 컴퓨터로부터 얻은 PCB 스크랩을 산화처리한 시료에 대해 정량분석을 실시하고, 함유된 산화물 종류에 대하여 적합한 슬래그계를 선정하여 유가금속을 분리회수하기 위한 산화물 성분의 슬래그화를 시도하였다. 용융작업을 위해 슈퍼칸탈 회전로를 사용하였으며, 이때 도가니 회전이 금속의 회수율에 미치는 영향을 조사하였다.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.239-245
• /
• 2003

In order to explore the possibility to extract precious metals from PCB(Printed Circuit Board) scrap by gravity separation, a high temperature melting process was adopted, from the recycling view point, to investigate the influence of viscosity on A1$_2$$O_3$-CaO$-SiO_2$ slag system composed of PCB scrap. For optimizing the pre-treatment process of PCB scrap, an experimental condition for the complete calcination and oxidation of organic materials in PCB scrap was established and a quantitative analysis of oxidized PCB scrap was also carrie out. It was found that 6 hours were enough for the complete oxidation of PCB scrap at 1273 K in an atmosphere condition. A slag, l5wt%$A1_2$$O_3$-45wt%CaO-40wt%SiO$_2$, was chosen as a basic slag composition which is determined based on the quantitative analysis of PCB scrap. Viscosities were measured in slag systems both made from pure fluxes and from PCB scrap with additional fluxes. Slag viscosities composed of pure fluxes were measured to be 5.29 poise and 30.52 poise at temperatures of 1773 and 1573 K, whereas that of PCB scrap with additional fluxes were 3.37 poise and 69.89 poise, respectively.

• 한국재료학회지
• /
• 제15권1호
• /
• pp.31-36
• /
• 2005

It is well known that PCB (Printed Circuit Board) is a complex mixture of various metals mixed with various types of plastics and ceramics. In this study, high temperature pyre-metallurgical process was investigated to extract valuable metallic components from the PCB scrap. For this purpose, PCB scrap was shredded and oxidized to remove plastic materials, and then, quantitative analyses were made. After the oxidation of the PCB scrap, $30.6wt\%SiO_2,\;19.3wt\%Al_2O_3\;and\;14wt{\%}CaO$ were analyzed as major oxides, and thereafter, a typical composition of $32wt\%SiO_2-20wt\%Al_2O_3-38wt{\%}CaO-10wt\%MgO$ was chosen as a basic slag system for the separation of metallic components. Moreover a size effect of crushed PCB scrap was also investigated. During experiments a high frequency induction furnace was used to melt and separate metallic components. As a result, it was found that the size of oxidized PCB scrap was needed to be less 0.9 m to make a homogeneous liquid slag and to recycle metallic components over $95\%$.

• 자원리싸이클링
• /
• 제26권4호
• /
• pp.9-18
• /
• 2017

최근 전자산업의 급격한 성장으로 전자부품스크랩의 발생량 역시 빠르게 증가하고 있다. 특히 전자부품스크랩의 구성부품 중 인쇄회로기판(PCB)은 금, 은, 구리, 주석 및 니켈 등 일반금속부터 귀금속 및 희소금속까지 포함하고 있는 중요한 재활용 대상이다. 하지만 국내에는 일부 대기업을 중심으로 한 PCB 처리 및 재활용 기술이 상용화되어 있으며 그 외 처리량에 대해서는 정확하게 집계되지 않고 있는 실정이다. 이에 따라 몇몇 도시광산 업체 및 연구소, 대학교를 중심으로 기존 대기업 중심의 상용화 공정 외에 PCB로부터 유가금속을 회수하고 원료로 재사용하는 연구가 진행되고 있다. 따라서 본 연구에서는 국내의 폐 PCB의 처리 및 회수현황과 재활용 기술 동향을 분석하였고, 이를 통해 PCB 폐자원의 자원순환 활성화에 기여하고자 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.386-387
• /
• 2006

This study is about the recycling technology of scrap a PCB(printed circuit board) produced in home appliances or automobile industry. And we develop the recycling technology of cooper (Cu)which is contained to leaching solution. In stead of electrolytic collecting in existing sulphuric atmosphere, we apply process using the ammonia solution which is used in economizing energy. So m the process of electrolyzing scrap a PCB through the leaching and separation, we examine the effect of the nickel contained to the solution and the cooper degree of purity which is changed according to current density.