• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

This research aims at developing a low-cost PC-NC system based on one-CPU and investigating the feasibility of its application to a simple-function lathe. Its hardware consists a two axes motion control board including a 24bit counter, 8253 timer, a 12bit DA converter, DIO board for PLC operation and a PC with Intel Pentium 466MHz. The fundamental real-time MC functions such as G-code interpretation, interpolation, position and velocity control of axes are performed. User programming interface with functions of icon manipulation, tool-path simulation and NC-code generation was implemented. In order to achieve real-time control and safety, axis control, NC interpretation, interpolation and user communication are completely executed during every interrupt interval of I msec.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.144-152
• /
• 2003

The purpose of this paper is to establish an effective inspection system by using OMM (On-Machine Measurement) system based PC-NC. This system can reduce manufacturing lead time because part is inspected each process. Inspection process planning is accomplished by determining the number of measuring points, their location, measuring path using fuzzy logic, Hammersley method, traveling salesperson problem. Inspection with contacted sensor improve quality as inspection feature is developed to based machining feature. This method is tested by simulation and experiment, then analyzed measuring data and geometry tolerance.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.

• IE interfaces
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2006

In order to make best use of NC machine tools with minimal labor costs, they need to be in operation 24 hours a day without being attended by human operators except for setup and tool changes. Thus, unattended machining is becoming a dream of every modern machine shop. However, without a proper mechanism for real-time monitoring of the machining processes, unattended machine could lead to a disaster. Investigated in this paper are ways to using PC camera as a real-time monitoring system for unattended NC milling operations. This study defined five machining states READY, NORMAL MACHINING, ABNORMAL MACHINING, COLLISION and END-OF-MACHINING and modeled them with DEVS (discrete event system) formalism. An image change detection algorithm has been developed to detect the table movements and a flame and smoke detection algorithm to detect unstable cutting process. Spindle on/off and cutting status could be successfully detected from the sound signals. Initial experimentation shows that the PC camera could be used as a reliable monitoring system for unattended NC machining.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.462-470
• /
• 2022

The addition of dietary proteases (PRO) to weaner diets hydrolyzes soybean-based anti-nutritive factors and improves weaned pig's dietary digestibility and growth performance. Therefore, this study explores the effects of PRO in a lower crude protein (CP) level diet than that in a commercial diet on the growth performance, nutrient digestibility, and intestinal morphology of weaned pigs. A total of 90 weaned pigs were randomly assigned to 3 dietary treatments with 6 pigs per pen and 5 replicated pens per treatment using a randomized complete block design (block = body weight [BW]): 1) a commercial weaner diet as a positive control (PC; phase1 CP = 23.71%; phase2 CP: 22.36%), 2) lower CP diet than PC as a negative control (NC; 0.61% less CP than PC), and 3) an NC diet with 0.02% PRO. Pigs fed PC and PRO had higher (p < 0.05) final BW, average daily gain, and/or gain to feed ratio for the first three weeks and the overall experimental period than NC. The PC and PRO groups had greater (p < 0.05) apparent ileal digestibility of dry matter, CP, and energy than the NC group. Moreover, pigs fed PC and PRO increased (p < 0.05) apparent total tract digestibility of CP compared with those fed NC. In addition, the PRO group had a higher number of goblet cells than the PC and NC groups. However, pig fed PC and PRO increased (p < 0.05) villus height and height to crypt depth ratio in the ileum compared with those fed NC. In conclusion, PRO supplementation in a commercial weaner diet with low CP levels improves growth rate and nutrient digestibility by modulating the intestinal morphology of weaned pigs.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.99-105
• /
• 1996

Increasing demands on precision machining of free-form surfaces have necessitated the tool to move not only with position error as small as possible, but also with smoothly varying feedrates. In this paper, linear, circular and spline interpolators were developed in reference-pulse type using PC. M-SAM and M-DAM were designed by the comparison and analysis of previous interpolation methods. Spline interpolator was designed to follow the free-form curves. To apply to the real cutting process, constant feedrate compensation and acceleration-deceleration compensation were conceived. Finally, its performance was tested using retrofitted milling machine. As a result, new interpolation algorithm is favorable in precision machining of free-form curves.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.636-640
• /
• 2002

In contrast to conventional CNC, PC-NC opens a new era for machine tools to be more intelligent. For instance, machine tool with PC-NC can be a machine agent system with capability of reacting autonomously to changing operating conditions. This paper introduces a concept of intelligent machine agent system, composed of machine agent and cell manager. Machine agent performs the functions such as process monitoring, diagnosis, maintenance management, condition assessment and schedule negotiation, while cell manager coordinates the negotiation process among multiple machine agents.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.7
• /
• pp.885-891
• /
• 2022

Plant-based protein sources such as soybean meal have low digestibility and are generally promoted accumulation of undigested proteins into the intestine by enzymatic treatments. Moreover, potential intestinal pathogens ferment undigested proteins, producing harmful substances, such as ammonia, amines and phenols, leading to an overactive immune response and diarrhea in weaned pigs. As a solution, dietary proteases hydrolyze soybean-based antinutritive factors, which negatively affect immune responses and gut microbiota. In this study, we investigated the effects of dietary proteases (PRO) in a low-crude protein (CP) commercial diet on the immune responses and gut microbiota of weaned pigs. The experimental design consisted of three dietary treatments: a commercial diet as a positive control (PC; phase1 CP = 23.71%; phase 2 CP: 22.36%), a lower CP diet than PC as negative control (NC; 0.61% less CP than PC), and NC diet supplement with 0.02% PRO. We found that PRO tended to decrease the frequency of diarrhea in the first two weeks after weaning compared with PC and NC. In addition, pigs fed PRO showed decreased TNF-α and TGF-β1 levels compared with those fed PC and NC. The PRO group had a higher relative proportion of the genus Lactobacillus and lower levels of the genus Streptococcus than the PC and NC groups. In conclusion, the addition of PRO to a low CP commercial weaned diet attenuated inflammatory responses and modified gut microbiota in weaned pigs.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.185-193
• /
• 2002

Most of NC machines are operated by Is06983 standard called G-code, which was developed in the early days of machine tools. This G-code limits hardware performance of the currently developed high-performance hardware & machine tools. By describing only movements of tool, almost all of information of previous production departments is lost, and the machining department cannot exchange information with other departments. For adjusting new hardware environment and direct communication of CNC machines with CAD/CAM software, ISO 14649, STEP -NC is researched. This new standard stores CAD/CAM information as well as operation commands of CNC machines. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other STEP-NC milling machines, this system uses the STEP-NC file in form of XML as data input. It makes possible for STEP-NC machines to exchange information to other databases using XML. The mentioned system of this paper loads the XML file, analyzes it, makes tool paths of two5D features with information of STEP-NC, and machines automatically without making G-code. All of software is programmed with Visual C＋＋, and the milling machine is made with table milling machine, step motors, and motion control board for PC that can be directly controlled by C＋＋ commands. All modules of software and hardware were independent, it allows convenient for substitution and expansion of the milling machine. The example 1 in ISP14649-11 that had all information about geometry and machining and the example 2 that has only geometry and tool information were used to test automatic machining by the open-architecture milling machine.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.1
• /
• pp.60-68
• /
• 2004

The purpose of this paper is to establish an effective inspection system by using OMM (On-Machine Measurement) system based PC-NC. This system can reduce manufacturing lead time because a workpiece is inspected at every machining process and the manufacturing system which includes inspection faculty is able to realize on-line process on CNC machining center. The proposed OMM system is composed of a few algorithms for determination of inspection parameters. It is accomplished by determining the number of measuring points, their location, measuring path using fuzzy logic, Hammersley's method, TSP (Traveling Salesperson Problem) algorithm. The inspection feature applied to this system is based on machining feature. This method is tested by simulation and experiment that are analyzed measuring data and geometry tolerance.