• 제어로봇시스템학회지
• /
• 제3권4호
• /
• pp.20-26
• /
• 1997

본 논문에서는 가장 경제형의 PC-NC의 구조와 소프트웨어의 개방형 개념에 대해 서술하였다. 수치제어장치의 사용자와 생산업체간의 상응된 필요성에 의해 발전을 거듭하고 있는 PC를 이용한 수치제어장치의 개방형 구조는 공작기계 및 공장 자동화에 혁신적인 산업구조의 변화를 야기시킬 것으로 예상된다.

• Animal Bioscience
• /
• 제34권12호
• /
• pp.1974-1980
• /
• 2021

Objective: The objective of this study was to estimate standardized ileal digestibility (SID) of amino acids (AA) in growing pigs fed diets containing increasing levels of copra meal (CM) with β-mannanase supplementation. Methods: Twenty barrows (initial body weight: 34.43±0.11 kg) surgically fitted with T-cannulas at the distal ileum were individually housed in metabolism crates. Pigs were allotted to 5 dietary treatments in a completely randomized design with 4 replicates per treatment. The dietary treatments were: i) NC, negative control, corn-soybean meal (SBM) based diet, ii) PC, positive control, basal diet + 0.10% β-mannanase supplementation (800 IU/kg), iii) CM6, PC diet with 6% CM supplementation, iv) CM12, PC diet with 12% CM supplementation, and v) CM18, PC diet with 18% CM supplementation. A nitrogen-free diet was used to estimate basal endogenous losses of AA for SID calculation. All experimental diets contained 0.5% chromic oxide as an indigestible marker. Each period consisted of a 4-d diet adaptation period and a 3-d ileal digesta collection period. Results: There were no differences in apparent ileal digestibility (AID) and SID of all AA between the NC and PC treatments except that the PC treatment had lower AID and SID of glycine than the NC treatment (p<0.05). There were linear decreases in AID and SID of lysine (p<0.05) and aspartic acid (p = 0.06; tendency) with increasing levels of CM in the diets with β-mannanase. Conclusion: The β-mannanase supplementation had no effect on AA digestibility in pigs fed the corn-SBM based diet but increasing levels of CM reduced SID of lysine and aspartic acid.

• 한국가금학회지
• /
• 제50권3호
• /
• pp.125-132
• /
• 2023

본 연구는 깔짚 관리를 위한 수분흡수제의 도포 시기가 육계 생산성, 혈액성상, 깔짚 수분함량 및 발바닥피부염 발생 양상에 미치는 영향을 조사하기 위하여 수행되었다. 공시동물은 1일령 Ross 308 육계(42.0±0.24 g) 680수를 이용하여 평사(칸당 2 m²)에서 5주 동안 사육하였다. 처리구는 무처리 대조구(NC), 3주령 깔짚 처리구(PC), 수분흡수제 0주령, 0과 3주령, 3주령 도포의 총 5처리구, 처리당 4반복, 반복당 34수씩 680수를 완전임의 배치하였다. 육계 계사 내 깔짚 및 수분흡수제 도포 시기에 따른 체중, 증체량, 사료섭취량 및 사료요구율은 처리구 사이에서 유의적인 차이가 나타나지 않았다. 육계 계사 내 깔짚 및 수분흡수제 도포 시기에 따른 혈액 내 혈구 조성(leukocyte, erythrocyte, platelets) 및 H/L 비율은 유의차가 나타나지 않았다. 깔짚 수분함량 및 FPD 점수는 5주령에 깔짚 및 수분흡수제 처리구에서 유의적으로 감소하였다(P<0.05). 본 연구에 사용된 육계의FPD 점수는 NC 처리구에 비해 PC 처리구에서 가장 낮았으며(P<0.05), W1 및 W2 처리구보다 W3 처리구에서 낮은 경향을 보였다. 발바닥피부염은 PC와 W3 처리구에서 다른 처리구에 비해 낮은 비율을 보였으며, NC 처리구에서 발바닥피부염 발생 비율이 가장 높게 나타났다. 경제성을 분석한 결과, PC 처리구에서 지출이 가장 많이 발생하였으며, W3 처리구에서 지출이 가장 낮게 나타났다. W3 처리구에서 수입이 가장 높았으며, NC 처리구의 수입이 가장 낮았다. 총수입에서 총지출을 제한 이익은 185,859원(1,367 원/수)으로W3 처리구에서 가장 많았다. 결론적으로, 육계 깔짚에 수분흡수제를 3주령에 도포하였을 때, 깔짚 수분함량과 FPD 개선효과가 나타났다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.207-212
• /
• 1997

The purpose of this study is the development of CAM system which can cut and measure any shape by machining center and coordinate measuring machine. The overall goal of the CAM system is to achieve the CNC machining, from digitizing through to final cutting. The hardware of the system comprises PC and machining center, CMM. There are three steps in the CNC machining, (1) workpiece measuring on the CMM, (2) geometric modeling by the CAD system, (3) NC commands generation by the tool path compensated for tool nose radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.79-88
• /
• 1998

This study deals with the development of CAM system which can machine and measure any shape of mold and die by machining center and coordinate measureing machine . The overall goal of the CAM system is to achieve the mold and die machining , from digitizing through to final cutting. The hardware of the system comprises PC and machining center. CMM. There are three steps in the mold and die machining. (1) measuring of physical model by the CMM, (2) geometric modeling by the CAD system, (3) generation of NC code by the tool path compensated for tool radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1416-1420
• /
• 2006

3원 교잡종 (Landrace$\times$Yorkshire$\times$Duroc) 육성돈 72두를 공시하였으며, 시험 개시시 체중은 24.64$\pm$2.46kg이었다. 시험설계는 1)NC(basal diet; antibiotics free diet), 2) PC (NC diet + 0.1% antibiotics; chlortetracycline 0.05% + neomycin 0.05%), 3)DFM0.1(NC diet + 0.1% DFM)와 4)DFM0.3(NC diet + 0.3% DFM)의 4개 처리를 하여 처리당 6 반복, 반복당 3마리씩 완전임의 배치하였다. 총 사양시험 기간 동안, 일당증체량은 PC, DFM0.3, DFM0.1과 NC의 순으로 각각 806g, 781g, 774g및 753g으로 나타났으나, 유의적인 차이는 보이지 않았다(P>0.05). 사료효율에 있어서는 처리구간 유의적인 차이가 없었다(P>0.05). 혈액 내 IgG(Immunoglobulin G), WBC(White blood cell)함량에 있어서는 생균제를 0.3%첨가한 처리구에서 가장 높은 경향을 보였으나 유의적인 차이는 없었으며(P>0.05), RBC(Red blood cell)함량에 있어서는 처리구간 유의적인 차이를 보이지 않았다(P>0.05). 결론적으로 육성돈에 있어서 Lactic acid bacteria를 기초로한 복합생균제의 첨가, 급여 수준의 증가에 따라 성장 능력과 혈액성상이 개선시키는 영향을 주지 못하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.214-219
• /
• 2001

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. In this study, the compensation device and temperature-based algorithm have been presented in order to compensate thermal error of machine tools under the real-time. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1074-1083
• /
• 1993

본 연구에서 제시된 방법은 Fig.2(c)에 나타낸 방법으로 공구궤적의 검증과 더불어 NC공구궤적의 잘못된 부분과 정도를 찾아내 수정할 수 있도록하여 기존의 NC검증시스템의 비효율성을 해결하고자 했다.