• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.92-98
• /
• 2003

A wind turbine monitoring system is essential equipment fur the performance evaluation and mechanical load analysis of a wind turbine. A monitoring system using LabVIEW is developed in this study. This system monitors signals from a meteorological mast, wind turbine generator, and tower. The discrete signals which are sampled at t Hz are automatically saved on a data file in the unit of a day. Besides these basic functions, the developed monitoring system has the other several capabilities. One of them is the information access from a remote PC through the internet. A vision image of the test site area and data files that are produced by LabVIBW software can be uploaded to the main computer located in a remote site. An emergency backup system using UPS fur the power loss on the monitoring HW is also prepared, A detail explanation for the developed wind turbine monitoring system is presented in this study.

• 기술혁신연구
• /
• 제12권1호
• /
• pp.219-240
• /
• 2004

As Shapiro and Varian argue the open approach generates bandwagon effects and facilitates the diffusion of a standard thanks to network externalities. However, the open approach is not linked automatically to economic benefits as suggested by some famous cases as the IBM PC history. On the contrary, the closed approach enables a tight control over a technology and its development, and insures the appropriation of economic benefits. As Shapiro and Varian suggest, a firm can also decide to mix an open approach with tight control over improvement or extentions. Patent pool is to offer fair, reasonable, nondiscriminatory access under a single license to patents that are essential for the use of standards-based or other platform technologies. patent pool offers only one license to everyone, Since each patent is essential, the royalty rate and thus the value is the same whether a licensee uses one or more patents.

• 대한의용생체공학회:의공학회지
• /
• 제9권2호
• /
• pp.247-250
• /
• 1988

Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology.

• 한국통신학회논문지
• /
• 제33권8B호
• /
• pp.719-726
• /
• 2008

본 논문에서는 보안 게이트웨이가 서브넷 상의 단말기의 네트워크 접근 시도 시에 해당 단말기를 자동으로 인식하여 단말기 사용자의 인증 및 접근 제어 보안 룰셋을 기간 데이터베이스와 비교 판별하여 동적으로 조직 내의 역할 기반 접근 권한을 부여, 관리하는 방식에 대해 연구하였다. 덧붙여, 네트워크 관리자가 조직 구조와 관련하여 네트워크 레벨(L2)과 어플리케이션 레벨(L7)의 통합 액세스 제어를 지정할 수 있도록 사용자 중심의 권한 부여 모델을 제시하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.516-519
• /
• 2010

본 논문에서는 기존에 관리자가 화초가 자라는 토양에 함유된 수분의 양을 측정하여 물 공급시기를 판단하고, 그에 따라 필요시 수동으로 물을 공급해 주던 방식의 문제점을 개선하고자 제안하는 방법이다. 제안하는 시스템은 센서노드와 관리용 호스트 컴퓨터가 무선센서 네트워크로 연결된다. 계측시스템은 센서노드에 연결된 습도센서를 사용해서 흙속에 존재하는 수분의 양을 측정한다. 제어시스템은 수분의 양이 설정 값 이하로 떨어지면 솔레노이드 스위치를 제어해서 물 공급 시스템의 밸브를 자동으로 열어 일정한 수분이 공급되게 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.703-705
• /
• 1999

The Power supplies used commonly in the Nuclear, Thermal and Hydraulic Power Plant are required to test the function and reliabilities. For the better contribution of reliable operation and speedy maintenance of Power Plant, it is necessary to gather and analyze the datum, to print out the result of testing using PC and proper controllers. Various kinds of power supply shall be tested and examined automatically. By storing the test results in the Database it is possible to find out the changing of characteristics of power supplies. So it is very useful to prevent any problems that may occur in the power supplies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1144-1148
• /
• 1991

The problems occurred when developing a automatic wheel deburring system are to make effective flexibility in model change and the irregularity of the position/shape of the burr, to select optimal robotic manufacturing process and to develope optimal end effector. The locations where burr exists are on flange, rim and spoke. Here will be discussed the optimal solution for the removal of rim burr by using robot. The research can be summarized as the automatic robot path generation by recognizing rim contour and automatic deburring process technique. Various rim contour data is generated automatically when the sensor which is fixed to robot is moving with the parallel motion to the wheel center axis and this generated data is transferred to the data storage system and converted to the robot path data. The robotic tool system which is suitable to the rim deburring process is developed by integrating tool, compliance function and sensor. And factory automation system controlled by robot controller and PC is developed. This system shows good productivity and flexibility.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.703-712
• /
• 1994

This paper presents an automatic conversion of machining data from the orthographic views of press mold by feature recognition rule. The system includes following 6 modules : separation of views, function support, dimension text recognition, feature recognition, dimension text check and feature processing modules. The characteristic of this system is that with minimum user intervention, it recognizes basic features such as holes, slots, pockets and clamping parts and thus automatically converts CAD drawing details of press mold into machining data using 2D CAD system instead of using an expensive 3D Modeler. The system is developed by using IBM-PC in the environment of AutoCAD R12, AutoLISP and MetaWare High C. Performance of the system is verified as a good interfacing of CAD and CAM when applied to a lot of sample drawings.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.692-697
• /
• 1997

This paper presents a method of grinding and polishing automation of precision die after CNC machining. The method employs a robot system equipped with a pneumatic spindle and a special abrasive film pad. The robote program is automatically generated off-line from a PC and downloaded to robot controller. Position and orientation data for the program is supplied from cutter contact (CC) data of NC machining process. This eliminates separate robot teaching process. This paper aims at practical automation of die finishing process which is very time consuming and suffering from shortage of workpeople. Time loss for changeover from one product to next is eliminated by off-line programming exploiting appropriate NC machining data. Dextrous 6-axis robot with rigid wrist and simple tooling enables the process applicable to larger, rather complex 3 dimensional free surfaces

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1109-1112
• /
• 2003

Information technology has enabled mass standards calibration to be performed through internet. For this, an automatic weight handler was manufactured. During the operation the images of weight operation and the system are provided via the measurement system and a web server. The measurement system consists of a balance, a weight handler, instruments for environment measurement and a PC. The weight handler automatically loads and unloads weights on and from the weighing pan. The weight handler allows 6 series weights to be operated for weight calibration of 100-50-20-20-10-10 gram series weight. This capability could be used for "remote training" for series weight calibration.