• 정보처리학회논문지A
• /
• 제11A권7호
• /
• pp.521-528
• /
• 2004

본 논문에서는 버스 기반의 클러스터 구조에 적합한 새로운 태스크 스케줄링 기법을 소개하고, PC 클러스터에 구현하여 스케줄링 기법의 성능을 분석한다. 구현된 스케줄링 기법은 태스크 그래프를 입력으로 받아 PC 클러스터로 스케줄링하며, 휴리스틱을 사용하여 태스크를 선택적으로 중복함으로써 병렬연산시간을 단축한다. PC 클러스터는 리눅스 OS가 설치된 6대의 PC가 Gigabit Ethernet으로 연결되어 있다. 통신을 위해 TCP/IP 프로토콜을 사용하며, 메시지 교환을 위해 표준화된 병렬 프로그래밍 도구로 MPI를 사용한다. 실험을 한 결과 본 논문에서 소개한 스케줄링 기법이 비교 기법보다 병렬연산시간 측면에서 성능이 우수함을 확인하였다.

• Earthquakes and Structures
• /
• 제26권1호
• /
• pp.49-58
• /
• 2024

The purpose of this study was to develop a system capable of restoring the seismic performance of a precast concrete (PC) connection damaged by an earthquake. The developed PC connection consists of a top-and-seat angle, post-tensioning (PT) tendons, and U-shaped steel. The PC beam can be replaced by cutting the PT tendons in the event of damage. In addition, the seismic performance of the developed PC beam-column connection was evaluated experimentally. A PC beam-column connection specimen was fabricated, and a quasistatic cyclic loading test was conducted to a maximum drift ratio of 2.3%. Subsequently, the PC beam was replaced by a new PC beam, and the repaired PC connection was loaded to a maximum drift ratio of 5.1%. The structural performance of the repaired PC connection was then compared with that of the original PC connection. The difference in the load at the drift ratio of 2.3% between the original and the repaired PC specimens was only 0.2%. The residual drift ratio in the repaired PC specimen did not exceed 1.0% at the 2.0 % drift ratio cycles, which satisfies the life safety performance level specified in ACI 374.2R-13. When the developed PC connection system is used, structural performance can be restored by rapidly replacing the damaged elements.

• 한국건설관리학회논문집
• /
• 제23권6호
• /
• pp.30-42
• /
• 2022

OSC는 기획, 설계, 시공, 유지보수 등의 건설생산 전 과정에 걸친 공급망과 가치사슬의 한 유형으로 건설현장이 아닌 공장 등 제 3의 장소에서 제작한 후 현장으로 운반하여 설치 및 시공하므로써 최종 목적물을 생산하는 방식이다. 본 연구에서는 PC공법 및 RC공법을 적용한 공동주택 사례를 각각 1개에 대하여 공사비를 비교하였다. PC공법 적용(PC설계비 제외)의 경우 RC공법만 적용하는 경우에 비해 골조 단위물량(m³)당 골조공사비가 약 70% 내외로 증가(RC 공종 합계 기준 50%)함을 도출하였다. PC공법 적용 사례 전체 골조 공사비 중 PC비중이 90.2%로 'PC제작비'가 54.8%, 'PC조립' 28.5%, '운반'이 6.89%를 차지하여, PC제작 및 조립 부문에서 비용 절감 노력이 필요할 것으로 판단하였다. 또한, 비용과 편익을 함께 고려할 수 있는 의사결정 프레임워크 초안을 구축하였다. 편익의 경우 OSC 기술적 장점이 반영된 공사기간, 하자보수, 재해발생, 에너지효율, 소음/분진/폐기물, 온실가스 배출 지표를 제시하였다. OSC기반 PC 공동주택 도입 의사결정을 지원하기 위한 적용 효과 근거를 마련하는데 기여할 수 있을 것으로 판단된다.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.520-526
• /
• 2007

The effects of poly($({\varepsilon}$-caprolactone) (PCL) on poly(acrylonitrile-butadiene-styrene) (ABS) and polycarbonate (PC) blends were studied. Blends of ABS/PC (70/30, wt%) with PCL as a compatibilizer were prepared by a twin screw extruder. From the glass transition temperature $(T_g)$ results of the ABS/PC blends with PCL, the $T_g$(PC) of the ABS/PC (70/30) blends decreased with increasing PCL content. From the results of the morphology of the ABS/PC (70/30) blends with PCL, the phase separation between the ABS and PC phases became less significant after adding PCL in the ABS/PC blends. In addition, the morphological studies of the ABS/PC blends etched by NaOH indicated that the shape of the droplet was changed from regular round to irregular round by adding PCL in the ABS/PC blends. These results for the mechanical properties of the ABS/PC blends with PCL indicated that the tensile, flexural and impact strengths of the ABS/PC (70/30) blends peaked at a PCL content of 0.5 phr. From the results for the rheological properties of the ABS/PC (70/30) blends with PCL content, the storage modulus, loss modulus and complex viscosity increased at PCL content up to 5 phr. From the above results of the $T_g$, mechanical properties, morphology and complex viscosity of the ABS/PC blends with PCL, it was concluded that the compatibility was increased with PCL addition in the ABS/PC (70/30, wt%) blends and that the optimum concentration of PCL as a compatibilizer is 0.5 phr.

• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.90-97
• /
• 2005

일반적으로 DAB 시스템은 크게 stand-alone 방식과 PC/PDA 기반 방식으로 구분할 수 있다. PC/PDA 기반 방식은 stand-alone 방식에 비하여 휴대성이 떨어지나 연결된 PC/PDA의 메모리와 오디오/비디오 디코더 등 다양한 리소스를 이용할 수 있는 장점이 있다. 본 논문에서 구현한 DAB 수신기는 USB 인터페이스를 이용한 PC 기반의 수신기 시스템으로 USB 인터페이스 브리지는 FPGA와 EZ-USB 개발 키트를 이용하여 설계하였으며 실험을 위하여 기존의 stand-alone 방식의 DRK-026 DAB 수신기를 이용하여 PC 기반의 수신기를 구현하였다. USB 인터페이스 브리지는 시리얼 데이터를 USB 패킷 형태로 변환시켜주며 모든 신호는 하드웨어적으로 제어한다. 구현한 PC 기반 DAB 수신기의 동작 여부는 DAB 수신기로부터 오디오 데이터를 수신하여 USB 인터페이스를 통하여 PC에 전송한 후 디코딩 기능을 수행하는 것으로 확인하였다.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.129-142
• /
• 2001

To efficiently demonstrate the molecular motion, physical properties, and mechanical properties of polycarbonates, we studied the differences between bisphenol-A polycarbonate(BPA-PC) and tetramethyl bisphenol-A-polycarbonate(TMBPA-PC) using molecular modeling techniques. To investigate the conformations of BPA-PC and TMBPA-PC and the effect of the conformation on mechanical properties, we performed conformational energy calculation, molecular dynamics calculation, and stress-strain curves based on molecular mechanics method. From the result obtained from conformational energy calculations of each segment, the molecular motions of the carbonate and the phenylene group in BPA-PC were seen to be more vigorous and have lower restriction to mobility than those in TMBPA-PC, respectively. In addition, from the results of radial distribution function, velocity autocorrelation function, and power spectrum, BPA-PC appeared to have higher diffusion constant than TMBPA-PC and is easier to have various conformations because of the less severe restrictions in molecular motion. The result of stress-strain calculation for TMBPA-PC seemed to be in accordance with the experimental value of strain-to-failure ∼4%. From these results of conformational energy calculations of segments, molecular dynamics, and mechanical properties, it can be concluded that TMBPA-PC has higher modulus and brittleness than BPA-PC because the former has no efficient relaxation mode against the external deformations.

• Journal of Gastric Cancer
• /
• 제10권3호
• /
• pp.126-132
• /
• 2010

Purpose: Peritoneal carcinomatosis (PC) has a dismal prognosis and is occasionally encountered during initial exploration in patients with gastric cancer. The clinicopathological characteristics and survival were analyzed in patients with gastric cancer and PC. Materials and Methods: Among 2,083 gastric cancer patients who received surgery at the department of surgery, Hanyang University Hospital from 1992 to 2009, 130 patients revealed PC. Ten patients who were lost during follow-up were excluded. The remaining 120 patients were divided into three groups according to the type of surgery. The degree of PC was classified into P1(to the adjacent peritoneum) and P2 (to the distant peritoneum). Various other clinicopathological factors were analyzed using univariate and multivariatec survival analyses. Results: Systemic chemotherapy (SC), type of surgery, lymph node dissection, degree of PC, and presence of ascites were significant prognostic factors. However, age, gender, resection of PC, and Borrmann type were not significant prognostic factors. In a multivariate analysis, SC and the degree of PC were independent prognostic factors. The survival benefit of SC was significant without reference to the type of surgery or degree of PC. Conclusions: A gastrectomy should be considered feasible in patients with gastric cancer and PC. The independent favorable prognostic factors were SC and a low degree of PC. SC improved the prognosis regardless of operation type and degree of PC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.286-291
• /
• 1995

The deterioration of PC box girder may cause serious effect on the durability of PC structure compared to that of RC structures. In the durability assessment of PC box girder bridges, a quantitive model on crack width is considered as a measure of durability. This study suggests a durability limit state model for PC box girder bridges. This durability limit state model in formulated based on the conventional models on the cracks in concrete. And the allowable crack width is taken as an assumed value established by the design specification or provided by the maintenance authority of the structure.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.943-946
• /
• 2011

The electronic absorption and surface morphology evolution of two types of molecular double layer thin films, copper phthalocyanine (CuPc) layer deposited on chloro[subphthalocyaninato]boron(III) (SubPc) layer, denoted as SubPc/CuPc, and vice versa, with various thicknesses were investigated using ultraviolet (UV)-visible spectroscopy and atomic force microscopy (AFM). Both types of double layer structures showed similar broadened absorption patterns in the UV-visible region that were consistent with the fitted spectra following simple linear combination of the single layer absorption spectra of the two materials. In contrast, the surface morphology of double layer structures was dependent on the order of deposition. For the CuPc/SubPc structures, surface morphology was characterized by elongated grains, which are characteristic of SubPc thin films, indicating that the morphological influence of the underlying CuPc layer on the subsequent SubPc layer was not large. For the SubPc/CuPc structures, however, the underlying SubPc layer acted as a morphological template for the subsequently deposited CuPc layer. It was also observed that the grain size of the CuPc layer varied according to the thickness of the underlying SubPc layer.

• 대한화학회지
• /
• 제39권3호
• /
• pp.176-185
• /
• 1995

ZnO/$H_2Pc(I)_x$계의 광증감성 효율을 높이기 위하여 ZnO/$H_2Pc(I)_$x를 광전도성 고분자인 poly(9-vinylcarbazole)(PVCZ)에 분산시켰다. $H_2Pc$ 결정형에 따른 ZnO/$H_2Pc(I)_x$계의 요오드 도핑 함량(x)은 ZnO/${\chi}-H_2 Pc(I)_x$ 경우는 요오드의 농도가 증가할수록 x값이 증가하였고, ZnO/${\beta}-H_2Pc(I)_x$ 경우는 약 x=0.95인 요오드 농도가 $6.3{\times}10^{-3}\;M$ 이후에서는 오히려 x값이 감소되었다. 514.5 nm로 여기시킨 ZnO/${\beta}-H_2Pc(I)_x$계의 라만 스펙트럼에서 x값이 약 0.57에서부터 $I_3^-$ chain에 대한 특성 피크가 50~550 $cm^{-1}$에서 나타나기 시작하였다. ZnO/{\chi}-H_2Pc(I)_{0.48}$/PVCZ의 광증감 효과는 ZnO/${\chi}-H_2Pc(I)_{0.48}보다 1.6배, ZnO/${\beta}-H_2Pc(I)_{0.57}$/PVCZ보다 1.8배 크게 나타났다. 그리고 ZnO/$H_2Pc(I)_x$/PVCZ계에서 x값이 증가될수록 광중감 효과도 크게 증가되었다. 그러므로 $H_2Pc$의 광여기로 생성된 정공이 PVCZ으로 주입되어 ZnO/$H_2Pc(I)_x$/PVCZ계의 광증감 효과가 ZnO/$H_2Pc(I)_x$계의 광중감 효과보다 향상되는 것으로 판단된다.