• 대한지역사회영양학회지
• /
• 제12권4호
• /
• pp.477-488
• /
• 2007

Prevalence of an obese population has been increasing in Korea. Obesity is considered a major risk factor for chronic degenerative diseases. Specifically, prevalence of obesity is prominent for adult woman in Korea. In many weight control programs, weight change did not often show any beneficial effects for health. These facts discourage people in the program. Thus in this study, the anthropometry, blood pressure, serum biochemical indices and dietary habits were compared by percent body fat change for adult women to show the beneficial effects of the weight control program. Study subjects were 134. Measurements were done before and after the weight control program. Percent Body Fat (PBF) was measured by bioelectrical impedance analysis. Using PBF changes, subjects were grouped as I (more than 1% increase), M (${\pm}1%$ change), and D (more than 1% decrease). Data were analyzed using SPSS 12.0 program. Among the 134 participants, 13 increased their weight and 100 decreased. For PBF, 19 increased and 59 decreased. Statistical significant differences were shown for anthropometric assessments before and after for all weight, fat mass, percent body fat, waist-hip ratio and body mass index. I had increases, and D shows decreases. But the difference of D is large than M. Systolic and diastolic blood pressures decreased in all groups (p < 0.05). Fasting blood glucose decreased in all groups but were statistically significant only in D. Also triglyceride decreased in D (p < 0.05). Thus health conditions showed desirable changes in I < M < D in order. Dietary habit changes were desirable with only D. Weight, BMI and other indicators for obesity is not the real indicator for PBF. Recently it is easy to measure PBF. Thus, for weight control programs and to show benefits of the program, PBF is a good indicator for adult women in Korea.

• Restorative Dentistry and Endodontics
• /
• 제41권3호
• /
• pp.202-209
• /
• 2016

Objectives: The purpose of this study was to investigate the involvement of TRPA1 in the cinnamaldehyde-induced pulpal blood flow (PBF) change in the feline dental pulp. Materials and Methods: Mandibles of eight cats were immobilized and PBF was monitored with a laser Doppler flowmetry at the mandibular canine tooth. To evaluate the effect of cinnamaldehyde on PBF, cinnamaldehyde was injected into the pulp through the lingual artery at a constant rate for 60 seconds. As a control, a mixture of 70% ethanol and 30% dimethyl sulfoxide (DMSO, vehicle) was used. To evaluate the involvement of transient receptor potential ankyrin 1 (TRPA1) in PBF change, AP18, a specific TRPA1 antagonist, was applied into the pulp through the Class V dentinal cavity followed by cinnamaldehyde-administration 3 minutes later. The paired variables of experimental data were statistically analyzed using paired t-test. A p value of less than 0.05 was considered as statistically significant. Results: Administration of cinnamaldehyde (0.5 mg/kg, intra-arterial [i.a.]) induced significant increases in PBF (p < 0.05). While administration of a TRPA1 antagonist, AP18 (2.5 - 3.0 mM, into the dentinal cavity [i.c.]) caused insignificant change of PBF (p > 0.05), administration of cinnamaldehyde (0.5 mg/kg, i.a.) following the application of AP18 (2.5 - 3.0 mM, i.c.) resulted in an attenuation of PBF increase from the control level (p < 0.05). As a result, a TRPA1 antagonist, AP18 effectively inhibited the vasodilative effect of cinnamaldehyde (p < 0.05). Conclusions: The result of the present study provided a functional evidence that TRPA1 is involved in the mechanism of cinnamaldehyde-induced vasodilation in the feline dental pulp.

• 한국압력기기공학회 논문집
• /
• 제19권1호
• /
• pp.11-19
• /
• 2023

Additive manufacturing technology, called as 3D printing, is one of fourth industrial revolution technologies that can drive innovation in the manufacturing process, and thus should be applied to nuclear industry for various purposes according to the manufacturing trend change in the future. In this paper, we performed tensile tests of 3D printed stainless steel 316L as-built specimens manufactured by two types of technology; DED (Directed Energy Deposition) and PBF (Powder Bed Fusion). Their mechanical properties (tensile strength, yield strength, elongation and reduction of area) were compared. As a result of comparison, the mechanical properties of the PBF specimens were slightly better than those of DED specimens. In the same additive type of specimens, the tensile and yield strength of specimens in the X and Y direction were higher than those in the Z direction, but the elongation and ROA were lower.

• Restorative Dentistry and Endodontics
• /
• 제31권4호
• /
• pp.257-262
• /
• 2006

에피네프린을 함유한 국소마취제가 치수혈류량에 미치는 영향을 관찰하고, 이 국소마취가 와동 형성에 의해 야기되는 치수의 혈류변화에 미치는 영향을 평가하고자 전신마취 된 아홉 마리의 고양이 견치에서 1 : 100.000 에피네프린이 함유된 2% 리도카인 용액으로의 국소 침윤마취 전후 및 와동형성 전후의 치수혈류를 laser Doppler flowmetry (Periflux 4001, Perimed Co.. Sweden)를 사용하여 측정하고 paired t-test 로 통계 분석하였다 . 상아질 와동의 형성은 치수혈류의 현저한 증가를 초래하였다 (p < 0.05). 에피네프린을 함유한 리도카인의 침윤마취는 치수혈류를 유의하게 감소시켰다 (p < 0.05). 국소마취 한 치아에서는 마취되지 않은 치아에 비해 와동형성 시 유의하게 적은 치수혈류의 증가를 나타내었다 (p < 0.05). 따라서 본 연구에서는 혈관수축제를 포함한 국소마취가 와동 형성에 의해 초래되는 혈류량의 증가를 효과적으로 억제할 수 있음을 보여주고 있다.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.239-248
• /
• 2004

The purpose of this study was to investigate the influence of NK1 receptor antagonists on the pulpal blood flow (PBF) when applied iontophoretically through the dentinal cavity of the teeth in order to understand whether iontophoretically applied NK1 receptor antagonists can control the pulpal inflammation. Eleven cats were anesthetized with alpha-chloralose and urethane, and substance P (SP) was administered to the dental pulp through the catheterized lingual artery in doses that caused PBF change without the influence of systemic blood pressure. NK1 receptor antagonists were applied iontophoretically to the prepared dentinal cavity of ipsilateral canine teeth of the drug administration, and PBF was monitored. Data were analyzed statistically with paired t-test. PBF increase after iontophoretic application of the NK1 receptor antagonists followed by the intra-arterial administration of SP was significantly less than PBF increase after iontophoretic application of the 0.9% saline followed by the intra-arterial administration of SP as a control (p < 0.05). Iontophoretic application of the NK1 receptor antagonists (0.2~3.4 mM) following the intra-arterial administration of SP resulted in less increase of PBF than the iontophoretic application of the 0.9% saline following the intra-arterial administration of SP as a control (p < 0.05). Therefore. the results of the present study provide evidences that the iontophoretic application is an effective method to deliver drugs to the dental pulp. and that iontophoretically applied NK1 receptor antagonists block SP-induced vasodilation effectively. The above results show the possibility that the iontophoretical application of NK1 receptor antagonists can control the neurogenic inflammation in the dental pulp.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6340-6345
• /
• 2013

본 연구는 열 자극으로 유도된 신경성 염증 상태에서 혈류량의 변화와 histamine의 치수혈류 조절에 관해 유기적 관계를 연구함으로써 치수혈류 조절기전을 밝히고자 하였다. 연구방법은 열 마리의 고양이를 전신마취 하에 사용되었으며, 치수혈류의 변화는 레이저 도플러 측정계(Periflux 4001, Stockholm, Sweden)을 사용하여 측정 하였다. 레이저 도플러 측정하는 프로브는 하악 견치의 치면에 위치하였다. 열 자극은 입력/출력 장치와 열 자극 제어 스크립트 파일을 사용하여 치아에 적용하였다. 열($40-65^{\circ}C$)에 따라 치수 혈류량이 증가를 확인하였으며, $55^{\circ}C$에서 가장 큰 변화가 나타났다. 열 자극의 변화가 없는 $45^{\circ}C$에서 Histamine($5{\mu}g/kg/1ml$)를 치아와 가까운 설 동맥으로 주입 시 열 자극만 처치한 그룹보다 현저한 증가가 나타났다. 본 연구는 열적 자극에 의해 발생된 신경성 염증상태에서 치수혈류 변화와 이에 히스타민의 기능적으로 관여함을 나타내주며, 치아 염증 상태의 기전을 밝힐 수 있는 가능성을 보여준다.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.10-20
• /
• 2022

Recently, metal additive manufacturing (AM) is being investigated as a new manufacturing technology. In metal AM, powder bed fusion (PBF) is a promising technology that can be used to manufacture small and complex metallic components by selectively fusing each powder layer using an energy source such as laser or an electron beam. PBF includes selective laser melting (SLM) and electron beam melting (EBM). SLM uses high power-density laser to melt and fuse metal powders. EBM is similar to SLM but melts metals using an electron beam. When these processes are applied, the mechanical properties and microstructures change due to the many parameters involved. Therefore, this study is conducted to investigate the effects of the parameters on the mechanical properties and microstructures such that the processes can be performed more economically and efficiently.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.596-596
• /
• 2003

The purpose of this study were to evaluate the effect of epinephrine-containing local anesthetics on pulpal blood flow (PBF) and to compare the change of pulpal blood flow after cavity preparation between in non-anesthetized teeth and in anesthetized ones in cats. Nine cats were initially anesthetized with intra-muscular injection of keramine(75mg/kg) and acepromazine(2.5mg/kg). Periapical radiographs of canine teeth were taken, followed by intra-venous injection of alpha-chloralose(40mg/kg) and urethane (500mg/kg) through the femoral vein for the general anesthesia.(중략)

• 혜화의학회지
• /
• 제18권2호
• /
• pp.13-20
• /
• 2009

Objectives : In order to investigate change of isokinetic trunk muscle strength according to decrease of body composition analysis parameter after obesity treatment. Methods : 2 obese patients have been treated with oriental medical obese treatment for 1 month. One patient got the exercise treatment, another didn't. Before and after treatment, the segmental bioelectrical impedance analysis, isokinetic trunk muscle strength test were performed. Then we analyzed the relationship of data. Results : After obesity treatment, BMI(Body Mass Index), PBF(Percentage of Body Fat), WHR(Waist Hip Ratio) were decreased in all patient and LBM(Lean Body Mass) was increased. In non-exercise patient, Ext.PT(extension Peak Torque) was decreased and Flex.PT(flexion Peak Torque) was increased. In exercise patient showed the opposite results. E/F ratio became more imbalance. Conclusions: Ext.PT was decreased in non-exercise patient but increased in exercise patient. And the trunk muscle strength became imbalance in both patients, right after the treatment. So trunk muscle exercise should be carried out and it is necessary to do long term study.

• 소성∙가공
• /
• 제32권2호
• /
• pp.67-73
• /
• 2023

To overcome a climate change, manufacturing complex-shaped electric mobility parts becomes one of the important issues for enhancing a performance of motor with reducing their weight. Therefore, development of laser-based additive manufacturing shed on light due to their flexible manufacturing capacity that can be suitable to solve the poor formability of Fe-Si alloys for electric mobility parts. Although there are several studies existed to optimize the performance of additively manufactured Fe-Si alloys, the post-annealing effect was not well investigated yet though this is important to control the texture and mechanical properties of additively manufactured parts. In the present work, annealing effect on the mechanical property and microstructure of additively manufactured Fe-4.5Si alloy was investigated. Because of the ordered phase initiation after annealing, the hardness of additively manufactured Fe-4.5Si alloy increased up to 1173 K while a hardness drop occurs at the 1273 K condition due to the micro-crack initiation. The response surface methodology result represents the 1173 K-5 h sample is an optimal condition to maximize the mechanical property of additively manufactured alloy without micro-cracks.