• Title/Summary/Keyword: PASS theory

검색결과 163건 처리시간 0.024초

다순환 여과시험에 의한 자동차용 연료필터의 성능 평가 (Performance Evaluation of an Automotive Fuel Filter by Multi-Pass Filtration Test)

  • 이재천;장지현
    • 한국자동차공학회논문집
    • /
    • 제10권6호
    • /
    • pp.219-226
    • /
    • 2002
  • Filtration performance of an automotive fuel filter was evaluated based on the theory of Beta ratio. This study also introduced the fuel components' contamination performance test stand incorporating the multi-pass filtration test circuit. The theoretical basis of multi-pass test and test procedure were described in detail. The specification of commercial fuel filter currently available was just the maximum pressure drop across the filter assembly and the holding capacity of contaminants. However, test results revealed that the fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity close to the specification. Hence the Beta ratio should be specified in service life. The results also showed that filtration system model should be refined including desorption ratio to estimate the variable Beta ratio in the test.

다단 신선공정을 이용한 초극세 로듐 와이어 제조 (Fabrication of Ultra-fine Rhodium Wire Using Multi-pass Wire Drawing Process)

  • 이상곤;이성윤;이인규;황선광
    • 소성∙가공
    • /
    • 제28권5호
    • /
    • pp.275-280
    • /
    • 2019
  • The aim of this study is to fabricate an ultra-fine pure rhodium wire using multi-pass wire drawing process. To manufacture $30{\mu}m$ ultra-fine rhodium wire from the initial $50{\mu}m$ wire, a multi-pass wire drawing process was designed based on the uniform reduction ratio theory. The elastic-plastic finite element analysis was then conducted to validate the efficacy of the designed process. The drawing load, drawing stress, and the distribution of the effective strain were evaluated using the finite element analysis. Finally, the wire drawing experiment was performed to validate the designed wire drawing process. From the results of the experiment, the diameter of the final drawn wire was found to be $29.85{\mu}m$.

가속주행하는 차량의 배기 토출 소음 예측 (Tailpipe Noise Prediction of an Accelerating Vehicle)

  • 김봉기
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
    • /
    • pp.291-294
    • /
    • 2000
  • 가속 주행하는 차량의 소음을 줄이기 위해서는 각 소음원의 기여도를 파악하는 것이 필요하다. 본 논문에서는, 가속 주행하는 차량의 배기 토출 소음을 ISO362에서 규정한 음압 측정 지점에서 예측하기 위하여, 시간 영역에서 근접장 배기 토출 소음을 예측할 수 있는 시뮬레이션 프로그램 'WAVE'와 움직이는 음원의 방사 모델을 이용하였다. 가속 주행중 차량의 소음원에 의한 음파의 전달은 도플러효과와 시간 지연이 발생하며, 이를 고려하여 정지된 지점에서의 소음레벨을 예측하였으며, 배기 토출 소음의 예측을 통하여 가속주행소음에 대한 기여도와 그 소음 특성을 파악할 수 있다.

  • PDF

Frequency Characteristics of the Synchronous-Frame Based D-Q Methods for Active Power Filters

  • Wang, Xiaoyu;Liu, Jinjun;Hu, Jinku;Meng, Yuji;Yuan, Chang
    • Journal of Power Electronics
    • /
    • 제8권1호
    • /
    • pp.91-100
    • /
    • 2008
  • The d-q harmonic detecting algorithms are dominant methods to generate current references for active power filters (APF). They are often implemented in the synchronous frame and time domain. This paper researches the frequency characteristics of d-q synchronous transformations, which are closely related to the analysis and design issues of control system. Intuitively, the synchronous transformation is explained with amplitude modulation (AM) in this paper. Then, the synchronous filter is proven to be a time-invariant and linear system, and its transfer function matrix is derived in the stationary frames. These frequency-domain models imply that the synchronous transformation has an equivalent effect of frequency transformation. It is because of this feature, the d-q method achieves band-pass characteristics with the low pass filters in the synchronous frame at run time. To simplify these analytical models, an instantaneous positive-negative sequence frame is proposed as expansion of traditional symmetrical components theory. Furthermore, the synchronous filter is compared with the traditional bind-pass filters based on these frequency-domain analytical models. The d-q harmonic detection methods are also improved to eliminate the inherent coupling effect of synchronous transformation. Typical examples are given to verify previous analysis and comparison. Simulation and experimental results are also provided for verification.

MULTIPLICITY RESULT OF THE SOLUTIONS FOR A CLASS OF THE ELLIPTIC SYSTEMS WITH SUBCRITICAL SOBOLEV EXPONENTS

  • JUNG, TACKSUN;CHOI, Q-HEUNG
    • Korean Journal of Mathematics
    • /
    • 제23권4호
    • /
    • pp.619-630
    • /
    • 2015
  • This paper is devoted to investigate the multiple solutions for a class of the cooperative elliptic system involving subcritical Sobolev exponents on the bounded domain with smooth boundary. We first show the uniqueness and the negativity of the solution for the linear system of the problem via the direct calculation. We next use the variational method and the mountain pass theorem in the critical point theory.

CRITICAL POINT THEORY AND AN ASYMMETRIC BEAM EQUATION WITH TWO JUMPING NONLINEAR TERMS

  • Jung, Tacksun;Choi, Q-Heung
    • Korean Journal of Mathematics
    • /
    • 제17권3호
    • /
    • pp.299-314
    • /
    • 2009
  • We investigate the multiple nontrivial solutions of the asymmetric beam equation $u_{tt}+u_{xxxx}=b_1[{(u + 2)}^+-2]+b_2[{(u + 3)}^+-3]$ with Dirichlet boundary condition and periodic condition on t. We reduce this problem into a two-dimensional problem by using variational reduction method and apply the Mountain Pass theorem to find the nontrivial solutions of the equation.

  • PDF

Dielectric Band-Pass Filter with Attenuation Poles at Desired Frequencies

  • Lee, Moon-Que
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제4C권6호
    • /
    • pp.268-271
    • /
    • 2004
  • An analytic design formula is proposed for a TEM mode dielectric bandpass filter with attenuation poles at desired frequencies in the stop band. In order to sustain the constant ripple in the passband due to attenuation poles, the initial resonant frequencies of the various resonators adopted in a filter with attenuation poles are newly calculated. The proposed design theory is verified by designing various bandpass filters with attenuation poles in the stop band.

SOLVABILITY FOR A CLASS OF THE SYSTEMS OF THE NONLINEAR ELLIPTIC EQUATIONS

  • Jung, Tack-Sun;Choi, Q-Heung
    • 대한수학회보
    • /
    • 제49권1호
    • /
    • pp.1-10
    • /
    • 2012
  • Let ${\Omega}$ be a bounded subset of $\mathbb{R}^n$ with smooth boundary. We investigate the solvability for a class of the system of the nonlinear elliptic equations with Dirichlet boundary condition. Using the mountain pass theorem we prove that the system has at least one nontrivial solution.

Set Covering과 Minisum 기법을 활용한 시설물 최적위치 선정에 관한 연구 (119 구급대 위치선정사례에의 적용) (A Optimal Facility Location Using Set Covering and Minisum (Application to Optimal Location of 119 Eru))

  • 오세창;김정민
    • 대한교통학회지
    • /
    • 제27권4호
    • /
    • pp.103-113
    • /
    • 2009
  • 교통사고 발생시 119구급대의 신속한 사고현장 도착이 사고심도 감소에 가장 중요한 역할을 한다. 교통사고가 발생하여 부상자가 심정지후 4분이 경과하면 뇌손상이 시작되고 10분이 경과하면 사망할 가능성이 높은 것으로 조사되고 있다. 이에 따라 119구급대의 설치 고려시 교통사고 발생지역까지 통행시간을 고려하여 위치를 결정할 필요가 있다. 본 논문에서는 119구급대의 위치를 결정하는 방안에 대해서 기존 location theory를 검토하여 SCLM과 minisum location theory를 상호활용하는 방안을 모색하였다. 또한 기존 minisum location theory를 적용할 경우 최대통행시간($\lambda$)보다 통행 시간이 증가하는 경우가 발생할수 있는 문제점을 개선한 수정 minisum location theory를 제안한다. 수정 minisum location theory를 적용할 경우 모든 수요를 최대거리($\lambda$)내에 도착하면서 수요량과 통행시간에 대해서 최적화된 119구급대의 위치를 알 수 있다.

광대역 고조파 제거용 고온초전도 저역통과 필터의 설계 (A Design of High Temperature Superconducting Low-Pass Filter for Broad-Band Harmonic Rejection)

  • 곽민환;김상현;안달;한석길;강광용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 영호남학술대회 논문집
    • /
    • pp.78-81
    • /
    • 2000
  • A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method Ins a cutoff frequency of 0.9 GHz with a 0.01 dB ripple level. The coupled line type low-pass filter with stripline configuration was fabricated by using a high-temperature superconducting (HTS ; $YBa_2Cu_3O_{7-x}$) thin film on MgO(100) substrate. Since the HTS coupled line type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 62 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency Bemuse of good rejection of the spurious signals and harmonics, our low-pass filter is applicable to mobile base station systems such as cellular, personal communication systems and international mobile telecommunication(IMT)-2000 systems.

  • PDF