• Archives of Craniofacial Surgery
• /
• v.21 no.3
• /
• pp.143-155
• /
• 2020

Surgical anatomy for Asian rhinoplasty Part I reviewed layered anatomy with neurovascular system of the nose. Part II discusses upper two-thirds of nose which consists of nasal bony and cartilaginous structures. Nasal physiology is mentioned briefly since there are several key structures that are important in nasal function. Following Part III will cover lower one-third of nose including in-depth anatomic structures which are important for advanced Asian rhinoplasty.

• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.2
• /
• pp.17-26
• /
• 1991

This paper discusses an expert system to generate part codes and construct part families, ESPCC, for the group technology application. The ESPCC, that is developed by using VP-Expert rule-based expert system development tool, embodies the specific knowledge of human experts to determine part codes consistent with the OPITZ classification and coding system. The ESPCC is implemented on an IBM compatible personal computers running MS-DOS.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.868-870
• /
• 1998

This is Part II of a two part paper dealing with control design in petter systems using the method of normal forms. The companion paper (part I) [1] describes the general theory and control procedure. This paper depicts numeral results to show the validation of the proposed method and to observe the effects of controller setting changes.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.572-574
• /
• 1998

In this paper, we are proposed design of ATM networks to transfer for electric power system informations, proposed transport networks is partitioned management part and functional part, management part is partitioned edge network, core network, local network, authority network, functional part is partitioned core network, access network, edge area. It is based on laying and partitioning by ITU-T G.805, we also proposed ATM network requirements for Carrier Relay traffic acceptability in electric power system information.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.2
• /
• pp.123-130
• /
• 1992

The group formation problem of the machine and part in Flexible Manufacturing System (FMS) is a very important issue in planning stage of FMS. This paper discusses the problem of machine-part group formation. The purpose of the study is to develop a heuristic algorithm, which can handle more realistic machine-part group formation problem by considering manufacturing factors. A new similarity coeffecient has been developed to solve more realistic machine-part group formation problem. For the purpose of illustations, a numerical example is presented.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.244-249
• /
• 1997

드럼 속의 폐기물 안에 포함되어있는 방사성 물질의 함량을 비파괴적으로 측정하는 방사성폐기물 핵종분석시스템을 개발하여 고리원자력발전소 제4폐기물 저장고에 설치하였다. 시스템은 그 기능에 따라 상위레벨과 하위레벨로 나누어지는데, 상위레벨인 중앙감시 및 제어시스템 Part에서 전체 시스템을 원활하게 운전되도록 감시 제어를 하고, 하위 레벨에서는 드럼을 운반하는데 사용하는 크레인 운전 Part, 측정위치에 올려진 드럼을 분석하는 핵종분석 Part, 드럼 핵종분석 결과를 회전하면서 드럼 표면에 인쇄하는 Ink-jet Printer Part 로 구분된다. 상위레벨의 제어실내 감시제어 PC는 하위레벨과 RS-232C 멀티포트를 사용하여 통신을 하는데, 드럼의 반입에서 반출까지의 전 과정은 자동화되어 운전된다.

• Korean Journal of Korean Medical Institute of Dermatology and Aesthetics
• /
• v.1 no.1
• /
• pp.127-144
• /
• 2005

This study compared the activity of the aerial part of P. japonicum with its root in order to examine the possibility of the medicinal use of the aerial part, which has not been used as medicine, in substitute for the root that has traditionally been used as medicine. For this purpose, the author measured the proliferation of Human $CD4^-$ T cells, which are related to immunity, the differentiation of HL-60 cells, and the contents of IL-6, IgE and $TNF-{\alpha}$ and compared their anti-cancer effect on Hep3B and A549 cells. The results of this study are as follows: 1. As for Human $CD4^-$ T cells, $1.0\;g/{\ell}$ methanol extract from the aerial part promoted the proliferation of the cells 1.8 times higher while $1.0\;g/{\ell}$ methanol extract from the root did by 1.76 times higher compared to the control group. 2. As for HL-60 cells, methanol extract and water extract from the aerial part showed differentiation 1.14 times higher and 1.12 times higher respectively while methanol extract and water extract from the root did 1.14 times higher and 1.07 times higher compared to tile control group. 3. Cell density was highest on Day 4 of culture in all samples, Methanol extracts from the aerial part and the root showed activities of $7.9{\times}10^3\;cells/m{\ell}$ and $7.5{\times}10^3\;cells/m{\ell}$ respectively, and water extracts from the aerial part and the root did activities of $5.3{\times}10^3\;cells/m{\ell}$ and $6.1{\times}10^3\;cells/m{\ell}$. 4. The secretion of IL-6 was highest on Day 4 of culture. Methanol extracts from the aerial part and the root showed secretions of $6.7{\times}10^{-3}\;pg/cells/m{\ell}$ and $7.2{\times}10^{-3}\;pg/cells/m{\ell}$ respectively, and water extracts from the aerial part and the root did secretions of as high as $7.0{\times}10^{-3}\;pg/cells/m{\ell}$ and $6.0{\times}10^{-3}\;pg/cells/m{\ell}$. 5. As for the production of IgE, water extract from the root effectively inhibited the product at $1,000\;{\mu}g/m{\ell}$, methanol extract from the root at $10\;{\mu}g/m{\ell}$ and $100\;{\mu}g/m{\ell}$, water extract from the aerial at $1,000\;{\mu}g/m{\ell}$, and methanol extract from the aerial part at $1,000\;{\mu}g/m{\ell}$. 6. According to the result of measuring the content of $TNF-{\alpha}$, methanol extracts from the root and the aerial part showed inhibition effect at $10\;{\mu}g/m{\ell}$, $100\;{\mu}g/m{\ell}$ and $1,000\;{\mu}g/m{\ell}$. 7. As for liver cancer cell Hep3B, $1.0\;g/{\ell}$ methanol extracts from the root and the aerial part showed inhibition effects of 78% and 70% respectively, and $1.0\;g/{\ell}$ water extracts from the root and the aerial part did inhibition effects of 56% and 59%. 8. As for lung cancer cell A549, $1.0\;g/{\ell}$ methanol extracts from the root and the aerial part showed inhibition effects of 75% and 70% respectively, and $1.0\;g/{\ell}$ water extracts from the root and the aerial part did inhibition effects of 48% and 45%. The results of this study presented above show that the aerial part of P. japonicum has immunizing and anti-cancer effects as high as its root, which has commonly been used as medicine. There should be more in-depth research on the aerial part of P. japonicum in the future.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.109-115
• /
• 2021

This study is a study on the difference in dose according to the presence or absence of gonadal shielding of scattered rays generated during chest computed tomography examination, and the scattered dose of the examination site was measured by placing the RadEye G-10 device in the center of the phantom. When the gonads are not shielded, the scattering lines of the whole, both sides, posterior and gonads are measured and Xenolite nolead Apron (0.35 mm PB), Xenolite nolead Apron (front 0.35 mm PB Mix back 0.25 mm PB, Skirt overlap), Half Apron After shielding with (0.5 mm PB), each scattered dose was measured. During chest computed tomography, the scattered dose of the test site was measured at 272 μSv, and when not shielded with Apron, the average total was 43 μSv, left 81 μSv, right part 82 μSv, posterior part 38.8 μSv, and Gonad part 16 μSv. Became. Xenolite nolead Apron shielded only the upper part and measured all 11.2 μSv, left part 43.1 μSv, right part 45.3 μSv, posterior part 12 μSv and Gonad part 5.2 μSv. Xenolite nolead Apron (Skirt overlap) covered the Pelvis area 360° and the dose was measured to be 5.6 μSv in the whole, 22.4 μSv in the left, 15.7 μSv in the right side, 6 μSv in the posterior part, and 3.2 μSv in the Gonad part. Xenolite nolead Apron (Skirt overlap) covered the Pelvis area 360° and the dose was measured to be 5.6 μSv in the whole, 22.4 μSv in the left, 15.7 μSv in the right side, 6 μSv in the posterior part, and 3.2 μSv in the Gonad part. When measuring only the upper part with Half Apron, the total measurement was 10.7 μSv, the left part 42.6 μSv, the right part 40.6 μSv, the posterior part 11.3 μSv, and the Gonad part 4.7 μSv. The method of 360° shielding of the pelvic area showed a dose reduction of more than 80%, and a dose reduction effect of more than 70% was shown when all shielding was performed. In all computerized tomography examinations, research to reduce the exposure dose and various shielding devices were used. It is believed that continuous research on the technique is needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.454-459
• /
• 2017

In this study, a thermal system was designed using a 3-way valve and PTC attached to a solar module. This design could help solve the problem of rising fossil fuel costs caused by limited reserves and environmental problems resulting from fossil fuel use. The thermal system is a hot-air and heating control system composed of a temperature sensor part, mode setting part (for hot air and heating modes), supply part, and thermal system control part. The temperature sensor part has piping and an indoor temperature display, and the temperature setting part has multiple monitoring functions. The mode setting part switches between hot air and heating modes and can be used to set the temperature. The thermal system control part performs functions such as PTC control and temperature setting, PTC day and night and time selection, hot air and heating control, and three-way valve selection. The results verify that the system operates with stable response speeds of $680{\mu}s$ in the temperature sensor part, $700{\mu}s$ in the mode setting part, and $610{\mu}s$ in the thermal system control part.

• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.