• 제목/요약/키워드: P600

검색결과 1,717건 처리시간 0.031초

상아질과 Gutta-Percha에 대한 근관충전용 Sealer의 결합강도의 측정 (MEASUREMENT OF ADHESION OF ROOT CANAL SEALER TO DENTINE AND GUTTA-PERCHA)

  • 허미자;유미경;이세준;이광원
    • Restorative Dentistry and Endodontics
    • /
    • 제28권1호
    • /
    • pp.89-99
    • /
    • 2003
  • The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

세라믹 종류, 두께 및 소성온도에 따른 식물개체제어형 세라믹 자동점적관수시스템의 점적성능 (Trickling Performance of Individual Watering System with Variety, Thickness and Firing Temperature of Ceramic)

  • 양원모
    • 생물환경조절학회지
    • /
    • 제8권4호
    • /
    • pp.257-264
    • /
    • 1999
  • 세라믹의 종류와 두께 그리고 소성온도를 달리하여 제작한 세라믹 자동점적센서의 점적성능을 비교 분석하였다. 자체제작 세라믹센서에 가장 많이 함유된 조성성분은 $SiO_2$로 54.17~71.62wt.%였으며 다음이 A1$_2$O로 15.42~33.79 wt.%였다. 두 성분의 합계는 백자토 92.34 wt.%, 옹기토 89.18 wt.%, 미립분청토 88.17 wt.%, 세립분청토 87.96 wt.%, 대조구(시판수입제품) 87.04 wt.%였다. $SiO_2$:A1$_2$O의 비율은 백자토 73.2:26.8, 옹기토 80.2:19.8, 미립분청토 68.9:31.1, 세립분청토 61.6:38.4, 재조구 82.3:17.7이었다 기타 Fe$_2$ $O_3$, CaO, MgO, $Na_2$O, $K_2$O, Ti $O_2$, P$_2$ $O_{5}$ 등이 10wt.%내외 함유되어 있었다. 공극율은 세립분청토에서 가장 높았고 백자토, 옹기토 순이었으며 소성온도가 높을수록 두께가 두꺼울수록 공극율이 높았다. 두께 2.5mm로 성형한 세라믹의 점토종류에 따른 공극율은 세립분청토 37.47%, 세립분청토와 옹기토의 혼합토 34.82%, 백자토 34.71%, 옹기토 32.5% 순이었다. 세라믹의 점토종류, 소성온도에 관계없이 자동점적이 가능하였으나 점적센서의 반응주기와 점적량의 집중도는 차이가 있었으며, 세라믹의 두께나 상부 플라스틱 개폐장치의 탄력성에 따라서도 점적패턴과 점적량의 집중도에 큰 차이가 있었다. 세립분청토나 백자토에서는 점적지속시간이 짧았으며 백자토의 경우 점적량의 증가가 급격하지만 감소는 서서히 이루어졌다. 또한 세라믹의 두께가 두꺼울수록 점적지속시간이 짧았으며 점적량의 증가는 급격하였고 감소는 완만하였다. 그러나 두께 1mm로 얇은 경우는 백자토를 제외하고는 정상적인 급액이 이루어지지 못하였다. 세라믹 센서를 50$0^{\circ}C$에서 소성한 경우 점적지속시간이나 단위시간당 점적량이 불안정하였으며 $600^{\circ}C$$700^{\circ}C$에서는 비교적 안정된 양상을 보였으나 점적지속시간이 길어졌으며 80$0^{\circ}C$ 또는 90$0^{\circ}C$에서 소성한 경우는 점적지속시간이 짧은 반면 단위시간당 점적량이 커지면서 점적의 개시와 종료가 뚜렷하였다.

  • PDF

Dibutyryl Cyclic AMP가 생쥐여포난자의 성숙에 미치는 억제효과에 관한 자기방사법적 연구 (Autoradiographic Studies on the Inhibitory Effect of Dibutyryl Cyclic AMP on Mouse Oocyte Maturation in Vitro)

  • 최춘근
    • Applied Microscopy
    • /
    • 제7권1호
    • /
    • pp.21-43
    • /
    • 1977
  • This experiment was undertaken in order to localize the labeled dbcAMP (dibutyryl cyclic AMP) in oocytes whose development has been suppressed by cold dbcAMP for 6 or 19 hours in vitro. Mouse oocytes were obtained from the ovaries of 3-4 week old A strain female mice, by puncturing the Graafian follicles in the modified Krebs-Ringer bicarbonate salt solution under the dissecting microscope. Those oocytes which have intact germinal vesicle were cultured in the basic culture medium supplemented with 0.4% bovine serum albumin (BSA). Cultivation of the oocytes was carried out in a microtube developed by Cho (1974). The cultures were then incubated in a humidified 5% $CO_2$ incubator maintained at $37^{\circ}C$ for 6 or 19 hours (Donahue, 1968). DbcAMP was added to culture medium for a final concentration of 100ug/ml, and $^3H-dbc$ AMP (specific activity 13 Ci/mM) for a final concentration of $40{\mu}Ci/ml$ was also added to the medium. For electron microscopic autoradiography, those oocytes recovered from the culture were washed with phosphate buffer (pH 7.4), and immediately prefixed in a 2.5% glutaraldehyde overnight and postfixed for 2 hours at $4 ^{\circ}C$ in 1% osmium tetroxide in phosphate buffer with pH 7.4 (Palade, 1952). After fixation, the materials were dehydrated in graded alcohol series and embedded in Epon 812 mixture based on the standard procedures (Luft, 1961). The thin sections $600-700{\AA}$ thick were mounted on the grids of 200 meshes. The grids containing sections were coated with a nuclear emulsion Kodak NTB-3 and stored in a cold dark box (at $4^{\circ}C$) for 3 weeks. After exposure, the samples were developed with Kodak D-19 and stained with uranyl acetate and lead citrate. Routine observation was made with Hitachi HU-11E electron microsocope. The results of the observation were as followings: 1. It was found that the labeled dbcAMP penetrated the egg plasma membrane and dispersed at random in the cytoplasm. 2. It was also observed that most of the labeled dbcAMP was attached to microfibrillar lattices portion of the oocyte cytoplasm. There fore, it is presumed that the receptor of the dbcAMP is localized in the microfibrillar lattices of the oocyte. 3. It also seems that some other cell organells such as mitochondria, Golgi complex, cortical granules are not directly related to the action of the dbcAMP. 4. The labeled dbcAMP was neither observed in the membrane nor in the nucleus. Therefore, it seems that there is no relationship between the concentration of dbcAMP and the nuclear membranous permeability. 5. There was no difference in number of dbcAMP particles when oocytes were cultured for 6 hours and 19 hours. 6. However, it was observed that, in same of the oocytes suppressed in germinal vesicle by dbcAMP for 19 hours, cell organells were moved and concentrated to a small portion of the cytoplasm, and that the morphology of the organells greatly changed to an abnormal. form. Therefore, it is supposed that those oocytes were in the process of degeneration. From the above results, it is expected that dbcAMP penetrated the egg membrane and was bound to the receptor which seems to be located in the microfibrillar lattiees portion, and that this dbcAMP-receptor complex inhibited some enzyme system of the oocytes which are essential for the germinal vesicle breakdown.

  • PDF

니켈-크롬 합금에 대한 다용도 접착 시스템의 전단결합강도 (Shear bond strength of Universal bonding systems to Ni-Cr alloy)

  • 송소연;손병화;김종엽;신상완;이정열
    • 대한치과보철학회지
    • /
    • 제53권4호
    • /
    • pp.295-300
    • /
    • 2015
  • 목적: 레진과 니켈-크롬 합금의 결합력에 미치는 금속 프라이머 및 다용도 접착제의 영향에 대하여 비교 평가하고자 한다. 재료 및 방법: 실험을 위해 120개의 니켈-크롬 합금(Vera Bond 2V) 디스크를 제작하여 아크릴 레진 실린더에 포매하였다. 시편의 표면은 220 grit, 600 grit의 실리콘 카바이드지로 연마한 뒤 $50{\mu}m$의 알루미늄옥사이드 입자를 분사하여 처리하였다. 실험군은 메탈 프라이머의 적용(Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer)과 다용도 접착 시스템(Single Bond Universal, All Bond Universal)에 따라 6개 군으로 나뉘었다. 각 시편의 중앙에 높이 2 mm, 직경 3 mm로 복합레진을 충전하였으며, 제작된 모든 시편은 $37^{\circ}C$ 증류수에서 24시간 보관하였다. 만능시험기에 시편을 위치시킨 후 1 mm/min cross head speed로 전단결합강도를 측정하였다. 통계분석은0.05의 유의수준으로 일원분산분석을 시행하였고 Tukey's multiple coMParison test로 사후검정을 하였다. 결과: Single Bond Universal, All Bond Universal, Metal Primer II 3개 군과 Alloy Primer, MKZ Primer, Metal & Zirconia Primer 3개 군 사이에 통계학적으로 유의한 차이를 보였다(P<.001). 결론: 니켈-크롬 합금에 대한 다용도 접착 시스템의 전단결합강도는 Metal Primer II를 제외한 기존의 금속 프라이머를 적용했을 때 보다 높게 나타났다. 본 실험에서 더 나아가 다용도 접착 시스템 내 실란(Silane) 포함 여부에 따른 효과를 평가할 수 있는 연구가 필요할 것이다.

계란 할란검사장비의 성능 비교 (Comparison of Egg Testing Devices for Internal Egg Quality Measurements)

  • 김동준;전승엽;김희원;원재선;이재청;이경우
    • 한국가금학회지
    • /
    • 제43권4호
    • /
    • pp.229-233
    • /
    • 2016
  • 본 실험은 국내 외에서 시판 중인 계란검사장비 3종인 레이저형, 탕침형 그리고 초음파형의 성능을 평가하고자 실시하였다. 실험에 사용한 신선란은 단일 계군에서 산란한 특란을 선발하여 사용하였다. 실험 1에서는 동일한 계란을 순차적으로 3종의 장비를 이용하여 분석하였다. 실험 2에서는 동일한 계란을 순차적으로 2종의 장비를 이용하여 분석하였으며, 실험 3에서는 동일한 계군에서 산란한 계란 200씩을 각각의 할란검사장비를 이용하여 난질을 분석하였다. 분석항목으로는 난중, 농후난백높이, 호우유닛 그리고 난황색을 측정하였다. 실험 1과 2에서는 장비에 따른 난중의 차이는 발견되지 않았지만, 농후난백 높이와 호우유닛의 수치가 초음파형에서 가장 높았으며, 그 다음으로 탕침형, 레이저형순으로 조사되었다. 동일한 계군에서 산란한 계란을 각각 할란검사장비를 이용하여 분석한 결과, 난중에서는 차이가 없었지만, 초음파형에서 가장 높은 난백고와 호우유닛을 나타내었다. 하지만 난황색은 레이저형에서 가장 높은 결과를 나타내었다. 결론적으로 신선란을 대상으로 조사한 할란검사장비의 난질평가 결과는 장비에 따른 차이가 있는 것으로 조사되었다. 비록 장비간의 상관계수는 높게 계산되었지만, 동일 계란에 따른 호우유닛 결과는 장비에 따른 편의(bias)와 넓은 신뢰한계를 나타내었다. 이러한 결과는 호우유닛이 높은 신선란을 대상으로 품질을 평가한다면 어떤 장비를 사용하더라도 계란의 품질 등급에는 차이가 없겠지만, 일정기간 저장되어 호우유닛이 떨어진 계란을 대상으로 품질을 평가한다면 장비에 따라서 계란 등급에 차이가 날 수 있는 것을 의미한다. 하지만 본 연구에서는 동일한 계란을 할란 후 순차적으로 측정하여, 난황과 난백 시료 이동에 따른 기계적인 오차를 고려할 수 없기 때문에 향후 이러한 방법을 보완하여 할란검사장비의 성능을 평가할 수 있는 기법의 개발이 필요하겠다.

Present status and prospect for development of mushrooms in Korea

  • Jang, Kab-Yeul;Oh, Youn-Lee;Oh, Minji;Im, Ji-Hoon;Lee, Seul-Ki;Kong, Won-Sik
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2018년도 춘계학술대회 및 임시총회
    • /
    • pp.27-27
    • /
    • 2018
  • The production scale of mushroom cultivation in Korea is approximately 600 billion won, which is 1.6% of the Korean gross agricultural output. Annually, ca. 190,000 tons of mushrooms are harvested in Korea. Although the numbers of mushroom farms and cultivators are constantly decreasing, the total mushroom yields are increasing due to the large-scale cultivation facilities and automation. The recent expansion of the well-being trend causes increase in mushroom consumption in Korea: annual per capita consumption of mushroom was 3.9kg ('13) that is a little higher than European's average. Thus the exports of mushrooms, mainly Flammulina velutipes and Pleurotus ostreatus, have been increased since the middle of 2000s. Recently, however, it is slightly reduced. However, Vietnam, Hong Kong, the United States, the Netherlands and continued to export, and the country has increased recently been exported to Australia, Canada, Southeast Asia and so on. Canned foods of Agaricus bisporus was the first exports of the Korean mushroom industry. This business has reached the peak of the sale in 1977-1978. As Korea initiated trade with China in 1980, the international prices of mushrooms were sharply fall that led to shrink the domestic markets. According to the high demand to develop new items to substitute for A. bisporus, oyster mushroom (Pleurotus ostreatus) was received the attention since it seems to suit the taste of Korean consumers. Although log cultivation technique was developed in the early 1970s for oyster mushroom, this method requires a great deal of labor. Thus we developed shelf cultivation technique which is easier to manage and allows the mass production. In this technique, the growing shelf is manly made from fermented rice straw, that is the unique P. ostreatus medium in the world, was used only in South Korea. After then, the use of cotton wastes as an additional material of medium, the productivity. Currently it is developing a standard cultivation techniques and environmental control system that can stably produce mushrooms throughout the year. The increase of oyster mushroom production may activate the domestic market and contribute to the industrial development. In addition, oyster mushroom production technology has a role in forming the basis of the development of bottle cultivation. Developed mushroom cultivation technology using bottles made possible the mass production. In particular, bottle cultivation method using a liquid spawn can be an opportunity to export the F.velutipes and P.eryngii. In addition, the white varieties of F.velutipes were second developed in the world after Japan. We also developed the new A.bisporus cultivar "Sae-ah" that is easy to grown in Korea. To lead the mushroom industry, we will continue to develop the cultivars with an international competitive power and to improve the cultivation techniques. Mushroom research in Korea nowadays focuses on analysis of mushroom genetics in combination with development of new mushroom varieties, mushroom physiology and cultivation. Further studied are environmental factors for cultivation, disease control, development and utilization of mushroom substrate resources, post-harvest management and improvement of marketable traits. Finally, the RDA manages the collection, classification, identification and preservation of mushroom resources. To keep up with the increasing application of biotechnology in agricultural research the genome project of various mushrooms and the draft of the genetic map has just been completed. A broad range of future studies based on this project is anticipated. The mushroom industry in Korea continually grows and its productivity rapidly increases through the development of new mushrooms cultivars and automated plastic bottle cultivation. Consumption of medicinal mushrooms like Ganoderma lucidum and Phellinus linteus is also increasing strongly. Recently, business of edible and medicinal mushrooms was suffering under over-production and problems in distribution. Fortunately, expansion of the mushroom export helped ease the negative effects for the mushroom industry.

  • PDF

진주담치 근육중의 적색 Carotenoprotein의 정제 및 특성 (Purification and Characterization of the Red Carotenoprotein from the Muscle of Blue Mussel, Mytilus edulis)

  • 양현필;이안종;김용태;김세권
    • 한국수산과학회지
    • /
    • 제27권5호
    • /
    • pp.482-494
    • /
    • 1994
  • 우리나라에서 대량 생산되고 있는 진주담치 근육에서 Triton X-100를 사용하여 carotenoprotein을 추출, 정제하여 그 특성을 실험한 결과를 요약하면 다음과 같다. Carotenoprotein(${\lambda}_{max}=462nm$)를 $20\%$(w/v) $(NH_4)_2SO_4$, DEAE-cellulose 이온교환수지 그리고 Sephacryl S-300 겔 크로마토그래피를 통해 정제한 결과, 정제도는 5배 증가하였고 수율은 $1.85\%$였으며, carotenoprotein의 분자량은 약 372KDa(gel filtration)이었고, SDS-PAG 전기영동으로 단백질의 subunit를 확인한 결과, 60KDa($23.70\%$), 46.9KDa($9.14\%$), 26KDa($49.14\%$) 및 13KDa($18.02\%$)로 이루어져 있었다. Carotenoprotein의 안정성은 pH 4.0 이하의 강산 및 pH 10.0 이상의 강알칼리에서는 단백질이 불안정하였고, SDS 변성제를 $0.2\%$(w/v)되게 첨가하여 녹인 후 가시부 영역($400{\sim}600nm$)에서 최대파장 변화를 보면 462nm에서 456nm로 약 6nm 단파장 영역으로 이동한 것을 알 수 있었다. Carotenoprotein의 구성아미노산 조성은 threonine이 $35.90\%$로 다른 아미노산에 비해 함량이 높았으며, 필수아미노산과 소수성 아미노산의 함량은 전체아미노산 함량의 각각 $62.76\%$$25.02\%$를 차지하였고, methionine, histidine 및 proline은 존재하지 않았다. Carotenoprotein 1g당 총지질의 함량은 256mg였고, 그 구성지방산의 조성은 polyene산이 $62.4\%$로 가장 많았고 다음으로 포화산($19.58\%$)및 monoene산($18\%$) 순이었다. 특히, 16:4n-3의 조성비가 $33.90\%$로 상당히 높게 나타났고, EPA, DHA 등 w3 계의 장쇄(長鎖)고도불포화지방산의 조성비가 $22.13\%$로 높게 나타났으며, 양적으로 많은 지방산은 포화산 중에는 palmitic acid($C_{16:0}$), monoene산 중에서는 palmitoleic acid($C_{16:1}$), polyene산 중에서는 hexadecatetraenoic acid($C_{16:4}$), eicosapentaenoic acid ($C_{20:5}$), docosahexaenoic acid($C_{22:6}$) 등이 함량이 많았다. Carotenoprotein으로부터 분리한 총 caroteoid 함량은 $8.80mg\%$였고, 주 carotenoid는 mytiloxanthin($74.79\%$), 3,4,3'-trihydroxy-7',8'-didehydro-${\beta}$-carotene($18.26\%$)였다.

  • PDF

식품 중 타르색소의 동시분석 및 계통분석을 위한 HPLC 분석조건 및 정제과정 확립 (Optimization of HPLC Method and Clean-up Process for Simultaneous and Systematic Analysis of Synthetic Color Additives in Foods)

  • 박성관;홍연;정용현;이창희;윤혜정;김소희;이종옥
    • 한국식품과학회지
    • /
    • 제33권1호
    • /
    • pp.33-39
    • /
    • 2001
  • 이온쌍고속액체크로마토그래피를 이용하여 현재 우리나라에서 식품에 사용이 허용된 타르색소 8종과 일본등 외국에서는 허용되어 있으나 우리나라에서 허용되어 있지 않은 11종 등 총 19종의 동시 및 계통분석법을 확립하였다. HPLC에 사용한 컬럼은 Symmetry $C_18$, 이동상은 0.01 M TBA-Br이 함유된 0.025 M 초산암모늄용액-아세토니트릴-메탄올(65 : 25 : 10)과 0.01 M TBA-Br이 함유된 0.025 M 초산암모늄용액-아세토니트릴-메탄올(40 : 50 : 10)를 구배용매조성법(gradient mode)으로 사용하였다. 자외선 검출기의 파장은 동시분석의 경우 254 nm, 계통분석은 황색계통 420 nm, 적색계통 520 nm 그리고 청색 및 녹색계통은 620 nm로 설정하였다. 이때 색소들의 검출한계는 적색계통이 $0.05\;{\mu}g/g$, 황색계통은 $0.03\;{\mu}g/g$, 청색 및 녹색계통은 $0.01\;{\mu}g/g$이었다. Sep-pak $C_18$을 이용한 색소의 정제 방법은 혼합색소표준용액의 pH를 $5{\sim}6$으로 조정하고 0.1% TBA-Br을 가하여 색소를 보유시킨 다음 0.1% 염산-메탄올로 색소를 용출하여 HPLC로 분석하였다. 19종의 타르색소를 동시분석하는데 35분이, 계통분석시에는 18분 정도가 소요되었고 두 경우 모두 양호한 분리를 보였다.

  • PDF

급성폐손상환자에서 호기말양압의 변화가 폐모세혈관압에 미치는 영향 (The Effect of Positive end Expiratory pressure on the Pulmonary Capillary Pressure in Acute Lung Injury Patients)

  • 정병천;변창규;이창률;김형중;안철민;김성규;신중수
    • Tuberculosis and Respiratory Diseases
    • /
    • 제49권5호
    • /
    • pp.594-600
    • /
    • 2000
  • 연구배경 : 급성폐손상 환자는 폐의 염증 및 투과성 증가로 폐부종을 보인다. 폐부종의 중요한 결정요인은 폐모세혈관압이며 호기말양압은 폐모세혈관에 영향을 미치는 것으로 알려져 있다. 최근 폐동맥 풍선 도자를 이용한 임상적인 폐모세혈관압 측정법이 발전하여, 이를 이용 하면 폐동맥쐐기압 뿐만 아니라 폐모세혈관압 측정도 가능하게 되었다. 이에 급성폐손상 환자를 대상으로 폐동맥 풍선 도자로 폐동맥쐐기압 및 폐모세혈관압의 변화를 관찰하여 폐동맥쐐기압이 폐모세혈관압올 적절히 반영하는지 알아보고, 호기말양압의 변화가 폐모세혈관압에 미치는 영향을 알아보고자 본 연구를 시행 하였다. 방법 : 급성폐손상으로 기계호흡을 받은 11명의 환자를 대상으로 하였다. 호기말 양압을 0cm$H_2O$에서 시작하여 15분 간격으로 4cm$H_2O$ 씩 증가시켜 12cm$H_2O$까지 변화를 주연서 정해진 PEEP값에서 폐동맥 풍선 도자를 이용한 폐모세혈관압 측정법을 사용하여 자료를 얻었다. 결과 : 호기말양압을 0cm$H_2O$부터 12cm$H_2O$까지 증가시킴에 따라 중심정맥압은 $6.1{\pm}1.6$에서 $9.3{\pm}2.3$mmHg까지 증가하였고, 평균폐동맥압도 $22.7{\pm}7.4$에서 $25.3{\pm}7.3$mmHg까지 증가하였다. 또한 폐동맥쐐기압은 $9.8{\pm}2.1$ 에서 $12.8{\pm}2.1$mmHg로 증가하였고, 폐모세혈관압도 $15.3{\pm}3.3$ 에서 $17.8{\pm}3.2$mmHg로 증가 하였다. 결론 : 급성폐손상 환자에서 폐동맥쐐기압이 폐모세혈관압을 반영하나 호기말양압을 사용하면 폐모세혈관압이 증가하는 것을 관찰하였다. 따라서 급성폐손상 환자의 수액요법에서 폐동맥쐐기압 뿐만 아니라 폐모세혈관압의 감시도 가치가 있을 것으로 기대된다.

  • PDF

재가 장애인의 구강진료기관 이용실태와 구강건강관련 삶의 질 (Domestic Disabled People's Use of Dental Service Institutes and Their Oral Health Related Quality of Life)

  • 이현옥;양춘호;김진;김영임
    • 치위생과학회지
    • /
    • 제9권5호
    • /
    • pp.593-600
    • /
    • 2009
  • 본 연구에서는 장애인의 구강의료서비스 이용실태에 따른 삶의 질 수준을 분석하고, 삶의 질 영향요인을 분석하기 위하여 2008년 5월 1일부터 6월 1일까지 전북지역 일부 재가 장애인들을 대상으로 개별면접법을 실시하였다. 총 198부의 자료를 사용하였으며, SPSS WIN 12.0 프로그램을 이용하여 분석한 결과 다음과 같은 결론을 얻었다. 1. 대상자들의 68.2%가 구강진료기관을 이용경험이 있었으며, 신체적 장애, 정신적 장애, 감각장애 모두에서 80.0%이상이 지역사회 치과의원을 이용하는 것으로 조사되었다. 장애분류별 구강진료기관 방문 이유는 신체적 장애에서는 43.4%가 정기검진으로 가장 높게 조사되었고, 정신적 장애에서는 정기검진 이 37.9%, 감각장애에서는 통증 및 파절이 43.5%로 가장 높게 조사되었다. 2. 연구대상자들의 구강건강관련 삶의 질 수준은 평균 3.39점으로 조사되었으며, 일반적인 특성에서 연령, 종교, 결혼상태, 교육상태, 주관적인 건강상태 변수에서 삶의 질 수준에 통계적으로 유의한 차이를 보였다. 구강진료기관 이용경험이 없는 경우가 있는 경우보다 삶의 질이 높은 것으로 조사되었으며 (p=.011), 장애관련 특성에 장애정도와 장애기간에서 삶의 질 수준에 통계적으로 유의한 차이를 보였다. 3. 연구대상자의 삶의 질에 미치는 영향력을 살펴본 결과 일반적 특성 변수에서는 주관적 건강상태, 치과진료기과 이용실태와 장애관련 특성 변수에서는 치과진료기관 이용경험이 삶의 질 영향을 미치는 결정요인으로 선택되었다.

  • PDF