• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.999-1005
• /
• 2021

The object of this research is CS, which increases resolution while shortening inspection time, is applied to MRA to compare the quality of images for SENSE and CS techniques and to evaluate SNR and CNR to find out the optimal techniques and to provide them as clinical basic data based on this information. Data were analyzed on 32 patients who performed TOF MRA tests at a university hospital in Chung cheong-do (15 males, 17 females), ICA stenosis:10, M1 Aneurysm:10, and average age 53 ± 4.15). In the inspection, the inspection equipment was Ingenia CX 3.0T, Archieva 3.0T, and 32 channel head coil and 3D gradient echo as a method for equipment data. SNR and CNR of each image were measured by quantitative analysis, and the quality of the image was evaluated by dividing the observer's observation into 5 grades for qualitative evaluation. Imaging evaluation is described as being significant when the p-value is 0.05 or less when the paired T-test and Wilcoxon test are performed. Quantitative analysis of SNR and CNR in TOF MRA images Compared to the SENSE method, the CS method is a method measurement method (p <0.05). As an observer's evaluation, the sharpness of blood vessels: CS (4.45 ± 0.41), overall image quality: CS (4.77 ± 0.18), background suppression of images: CS (4.57 ± 0.18) all resulted in high CS technique (p = 0.000). In conclusion, the Compressed SENSE TOF MRA technique shows superior results when comparing and evaluating the SENSE and Compressed SENSE techniques in increased flow rate magnetic resonance angiography. The results are thought to be the clinical basis material in the 3D TOF MRA examination for brain disease.

• Women's Health Nursing
• /
• v.10 no.1
• /
• pp.51-58
• /
• 2004

Purpose: To compare the difference of state anxiety, perceived support, and childbirth experience perception, between the primiparous's husband who participated in actual labor and delivery process with her wife after finishing Lamaze childbirth class education and the husband who did not finished Lamaze childbirth class, for providing the basic data for effective nursing intervention and pre-childbirth educational program development for husbands. Method: At one general hospital located in Kyunggi-do and one clinic in Seoul, from April 6th to May 12th, 2003, the subjects were 146 including 67 primipara's husbands who participated in the 5-week Lamaze educational program and 79 primipara's husbands who didn't, using structuralized questionnaire. Analysis: Mean, frequency, percentage, 2-test, and t-test were used by SPSS 10.0 program. Result: The sub-hypothesis 1, 'there are significant differences between anxiety of the group who participated in Lamaze and who didn't' was not accepted(t=-1.043, p=.299). The sub-hypothesis 2, 'there are significant differences between anxiety by cervical dilatation the group who participated in Lamaze program and who didn't' was not accepted(t=-1.123, P=.263, t=-.356, P=.722, t=-1.879, P=.062). The hypothesis 3, 'there are significant differences between perceived support of the group who participated in Lamaze program and who didn't' was accepted(t=4.860, P=.000). Especially, the obstetrical support of the group who participated in Lamaze program, which could reduce delivering pain, was higher. The hypothesis 4, 'there are significant differences between the perception of childbirth-labor experience of the group who participated in Lamaze program and who didn't' was accepted(t=2.816, P=.006). Conclusion: The Lamaze program was a effective nursing intervention for husband's affirmative perception of childbirth-labor experience as well as husband's role as active supporters during labor process. The change of present woman-centered pre-childbirth education into both partner-centered education stressing on husband's needs, viewpoint and role as a supporter should be considered. Therefore, hospital administrators should pay more attention on enhancing the opportunities of husband for pre-birth education and participating in the process of labor as a family-centered nursing intervention.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.217-222
• /
• 2001

For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

• Journal of Animal Science and Technology
• /
• v.49 no.3
• /
• pp.395-404
• /
• 2007

This study was carried out to compare the physico-chemical and sensory characteristics of surimi manufactured by four different materials. We prepared surimi from alaska pollack, as the control, by washing method. The different treatments of surimi were manufactured by pH 11.0 adjustments with barren hen breast meat(T1), commercial mechanically deboned chicken meat(MDCM)-S. Co. (T2)and MDCM- J. Co.(T3). Whiteness, cohesiveness and overall acceptability were significantly higher but gumminess, chewiness and gel characteristics were significantly lower in control than other surimi samples(P<0.05). Lightness, brittleness, deformation, jelly strength and flavor were higher but texture properties and folding test of T1 were lower than those of other treatments(P<0.05). Texture properties, shear force and gel characteristics were higher, while deformation and acceptability of T2 were lower than those of other treatments(P<0.05). On the other hand, cohesiveness was higher, and lightness and whiteness were lower in T3 than those of other treatments(P<0.05). Correlation coefficients(>0.9) among texture properties and gel characteristics was positive, while negative among surface surimi colors(P<0.05). The content of crude protein, cohesiveness and gel characteristics indicated that the acceptable surimi can be made is replaced barren hen breast meat and MDCM.

• Journal of Korean Academy of Nursing
• /
• v.35 no.6
• /
• pp.1044-1053
• /
• 2005

Purpose: This study was aimed to evaluate the effects of a maternal education program based on the temperament theory on the temperamental goodness-of-fit between mother and child. Method: The research method was a nonequivalent, control group, non-synchronized design and the experimental period was from May 10, 2004 to July 24, 2004. The subjects were mothers who had children 3-4 years old who registered in eight kindergartens or infant schools in M city. Among the total 94 subjects, 47 were allocated as an experimental group and 47 were a control group. Using the SPSS/WIN 10.0 program, the data was analyzed by a Chi-square test, and t-test. Result: 1. After treatment with a maternal education program based on the temperament theory, the experimental group significantly decreased in scores for perceived children's behavior problems in comparison to the control group(t=-4.01, p<.001). 2. After treatment with a maternal education program based on the temperament theory, the experimental group did not significantly decrease in scores for parenting stress in comparison to the control group(t=-.85, p=.40). 3. After treatment with a maternal education program based on the temperament theory, the experimental group did not significantly decrease in scores for rejective parenting behaviors in comparison to the control group(t=-1.32, p=.19). Conclusion: A maternal education program based on the temperament theory is a useful intervention to decrease perceived children's behavior problems.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.168-173
• /
• 1998

A numerical analysis of axisymetric backward facing step main nozzle flow in air jet loom has been accomplished. To obtain basic design data for an optimum main nozzle for an air-jet loom and to predict the transonic/supersonic flow, a characteristic based upwind flux difference splitting compressible Navier-Stokes method has been used. The wall static pressure of the main nozzle and the flow velocity changes in the nozzle tube were analyzed by changing air tank pressures and acceleration tube lengths. The flow inside the nozzle experiences double choking one at the needle tip and the other at the acceleration tube exit at tank pressures over $4kg_f/cm^2$. The tank pressure $P_t$ leading to the critical condition depends on the acceleration tube length; i.e, $P_t$ is higher for longer acceleration tubes. The $P_t$ value required to bring the acceleration tube exit to the critical condition is nearly constant regardless of acceleration tube length. The round needle tip shape might lead to less total pressure loss when compared with step shape.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.1009-1015
• /
• 2023

This study was a one-group pretest-posttest design experimental study that attempted to verify the effects of applying the Havruta learning method on the academic self-efficacy, academic achievement, and communication skills of radiology college students. This study was conducted from May 1 to June 23, 2023, and applied the Havruta learning method for 6 weeks to 38 second-year radiologists taking a radiology technology course at a university in Jeollanam-do. SPSS/WIN 21.0 was used for data analysis, the reliability of the scale was verified, the subject's general characteristics, pre-test values and post-test values for measurement variables were verified with descriptive statistics, and the difference between before and after the Havruta learning method was verified with paired t-test. Research results show that the Havruta learning method improves academic self-efficacy (t=-2.70, p<.001), academic achievement (t=-2.87, p=.006), and communication skills (t=-2.76, p=.008). showed a statistically significant difference. As a result, Havruta learning method was confirmed as an effective learning method that improves academic self-efficacy, academic achievement, and communication skills of radiology college students. In the future, expanded application of the Havruta learning method will be necessary.

• Journal of Oral Medicine and Pain
• /
• v.10 no.1
• /
• pp.73-89
• /
• 1985

This study comprised 157 extracted teeth, 73 of the teeth originated from mates and 84 from females, the age range was 12-79 years. The correlation coefficient of each Gustafson's criteria in relation to age was carried out. Age estimation were performed on 157 teeth according to the method by Gustafson and by use of multiple regression, as used by Johanson, after evaluating the six criteria of Gustafson by multiple regression computer analysis. Two prediction formulas and standard deviations were compared with each other. The results were as follows : 1. The author found that six Gustafson's criteria had strong correlation with age except root resorption, and correlation coefficients were r = 0.79 (Transparent dentin), r=0.72 (Secondary dentin), r 0.69 (Periodontal change), r=0.63(Attrition), r = 0.39 (Root resorption), respecti vely. 2. The age estimation formula by Gustafson's method was calculated as follows: Y 8.88 + 3.52X r =0.87, r2 = 0.76, SD = 8.18, F = 483.56, P < 0.01 The age estimation formula by multiple regression was calculated as follows: Y 8.57 + 6.37T + 6.37T + 4.63P + 2.70S + 2.40C + 3.08A + 1.34R r= 0.89, r2 = 0.78, SD = 7.82, F = 91.62, P < 0.01, Durbin-Watson Coefficient = 1.09 3. In comparison of two estimation formulas, the formula by multiple regression, the method of Johanson, was found to be slightly more reliable than Gustafson's method. Gustafson's method SD = 8.18, Multiple regression (Johanson's method) SD = 7.82 4. It was reaffirmed that Gustafson's six criteria could be a independent variable in multiple regression analysis.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.17 no.3
• /
• pp.419-426
• /
• 2010

Purpose: Women's weight perception and obesity-related quality of life were analyzed according to BMI (Body Mass Index). Methods: A survey was conducted using self-report questionnaires from 178 participants. The data analysis included descriptive statistics, frequency, percentage, t-test, ANOVA, Fisher's exact test and Kendall's tau using the SPSS version 14.0. Results: There were significant differences in BMI according to age (F=8.037, p=<.001), weight perception (F=60.71, p<.001), weight control experience (F=2.504, p=.013), weight control method (F=5.839, p=.001) and weight control success (F=-2.451, p=.016). There was a significant difference in obesity-related quality of life according to weight perception in the low weight group (F=5.587, p=.021) and in the obesity group (t=3.419, p=.003). Higher correlations were found between the women's BMI group, weight perception and obesity-related quality of life. Conclusion: A program to provide appropriate information for weight perception is needed for the low weight group. There is a need for a program about weight reduction as well as weight perception for the obesity group.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.331-343
• /
• 2017

In this study to improve stability, workability and economics of the H-Pile+Earth plate or H-Pile+Earth plate+Cutoff grouting currently in use, we had developed HCS method belonging to the retaining wall which is consisting of a combination H-Pile, Plastic Sheet Pile and Steel Square Pipe for gap maintenance and reinforcement of flexible plastic Sheet Pile, and the behavior of each member composing HCS method is investigated by three-dimensional finite element analysis. To numerically analyze the behavior of the HCS method, we have performed extensive three-dimentional finite element analysis for three kinds of plastic Sheet Pile size, two kinds of H-Pile size and three kinds of H-Pile installation interval, one kinds of Steel Square Pipe and three kinds of Steel Square Pipe installation interval. After analyzing the numerical results, we found that the combinations of $P.S.P-460{\times}131.5{\times}7t$ (PS7) and H-Pile $250{\times}250{\times}9{\times}14$ (H250), $P.S.P473{\times}133.5{\times}9t$ (PS9) and H-Pile $300{\times}200{\times}9{\times}14$ (H300) is the most economical because these combinations are considered to have a stress ratio (=applied stress/allowable stress) close to that as the stiffness of H-Pile, plastic Sheet Pile and Steel Square Pipe composite increased, the horizontal displacement of the retaining wall and the vertical displacement of the upper ground decreased. Especially, due to the arching effects caused by the difference in stiffness between H-Pile and plastic Sheet Pile, a large part of the earth pressure acting on plastic Sheet Pile caused a stress transfer to H-Pile, and the stress and displacement of plastic Sheet Pile were small. Through this study, we can confirm the behavior of each member constituting the HCS method, and based on the confirmed results of this study, it can be used to apply HCS method in reasonable, stable and economical way in the future.