• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.33-34
• /
• 2012

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1550-1554
• /
• 2003

One hundred of lactic cultures were evaluated for their ability to inhibit hazardous microbes, such as Salmonella enteritidis, Salmonella typhimurium, Escherichia coli, Listeria monocytogenes, and Bacillus cereus by agar well diffusion method. None of them showed inhibitory halo against S. enteritidis, while 27 strains showed inhibitory activity against S. typhimurium, 6 against E. coli, 9 against ampicillin resistant E. coli, 31 against L. monocytogens, 10 against B. cereus. pH of the culture does not explain for the inhibitory activity except against B. cereus. A neutralized culture from corn silage showed highest inhibitory activity against S. typhimurium, and the size of inhibitory halo was same as 10 ug/mL of ampicillin. The culture was identified to be Lactobacillus buchneri on the basis of biochemical characteristics and utilization of substrates. Using the culture as probiotics could be expected to reduce antibiotics for animal feeding.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.424-432
• /
• 1998

To get a satisfactory result in the composite resin restorations, it is necessary to choose correct shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guide or Bioform shade guide, but color differences might be expected even using the same shade in various materials. In this study, five kinds of light-cured composite resins with A2 and B3 shade were used to measure and compare the color each other while one porcelain served as a control. All composite resins (Spectrum TPH (SP), VeridonFil- Photo (VE), Z100 (Z100), Charisma (CH), Prodigy (PRO)) were filled in to the metal mold (12 mm diameter, 2 mm depth), followed by compression, polymerization and polishing with wet sandpaper. The specimens of porcelain were fabricated by using the refractory mold for porcelain. After 24 hours, the specimens were placed on the spectrocolorimeter and spectral reflectance were measured under CIE illuminant D65. After measuring the values of $L^*$, $a^*$, $b^*$ and ${\Delta}E^*$, following results were obtained; 1. The $L^*$, $a^*$ and $b^*$ values of both shade of porcelain specimens showed significantly higher than those of resin specimens(p<0.05). 2. In comparing the resin specimens of the A2 shade, differences were significant except $L^*$ values of SP-CH and PRO-VE, $a^*$ values of the VE-SP and $b^*$ values of the VE-Z100 and SP-PRO(p<0.05), 3. In comparing the resin specimens of the B3 shade, differences were significant except $L^*$ values of PRO-SP, $a^*$ values of the SP-PRO and Z100-VE and b* values of the PRO-SP(p<0.05). 4. In comparing the resin specimens of the A2 shade, color differences between materials (${\Delta}E^*$) showed the lowest value of 1.66, and the highest was 5.16. ${\Delta}E^*$ values of the materials of VE-PRO, CH-PRO, SP-PRO, SP-Z100 and SP-CH were lower than 3.3. 5. In comparing the resin specimens of the B3 shade, the lowest value of the ${\Delta}E^*$ was 0.57 and the highest was 5.92. ${\Delta}E^*$ values of Z100-CH and SP-PRO were lower than 3.3. The present study revealed there was perceptible color difference between materials even if they have the same designated shade based on Vita shade guide. The results of the present study suggested that it would be necessary to establish the reproducible and constant color specification system for an esthetic restoration.

• Korean Journal of Agricultural Science
• /
• v.44 no.3
• /
• pp.392-399
• /
• 2017

The present study was conducted to investigate the effects of different dietary proteins as fraction-enriched protein, defined by Cornell net carbohydrates and protein system (CNCPS), on in vivo ruminal fermentation pattern and blood metabolites in Holstein steers fed total mixed ration (TMR) containing 17.2% crude protein. Four ruminally cannulated Holstein steers in a $4{\times}4$ Latin square design consumed TMR only (control) and TMR with rapeseed meal (AB1), soybean meal (B2), and perilla meal (B3C). Each protein was substituted for 23.0% of crude protein in TMR. Rumen digesta were taken through ruminal cannula at 1 h interval during the feeding cycle in order to analyze ruminal pH, ammonia-N, and volatile fatty acids (VFA). Plasma metabolites in blood taken via the jugular vein after the rumen digesta sampling were analyzed. Feeding perilla meal significantly (p < 0.05) decreased mean ruminal pH compared with control and the other protein feeding groups. Compared with control, feeding protein significantly (p < 0.05) increased ruminal ammonia-N concentration except for AB1. Statistically (p > 0.05) similar total VFA appeared among control and the supplemented groups. However, control, AB1, and B2 showed higher (p < 0.05) acetate concentrations than B3C, and propionate was vice versa. CNCPS fractionated protein significantly (p < 0.05) affected concentrations of albumin and total protein in blood; i.e. plasma albumin was lower for control and B2 groups than AB1 and B3C groups. Despite lack of significances (p > 0.05) in creatinine and blood urea nitrogen, AB1 and B2 groups were numerically higher than the others.

• 전기의세계
• /
• v.28 no.4
• /
• pp.53-63
• /
• 1979

Interface recombination velocity in $Al_{x}$G $a_{1-x}$ As-GaAs and $Al_{0.85}$, G $a_{0.15}$ As-GaA $s_{1-y}$S $b_{y}$ heterojunction systems is studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n $Al_{x}$G $a_{1-x}$ As-GaA $s_{1-y}$S $b_{y}$-A $l_{x}$G $a_{1-x}$ As double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAs Sb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates. In the AlGaAs system, elastic lattice deformation with effective Poisson ratios .mu.$_{eff}$ (100=0.312 and .mu.$_{eff}$ (111B) =0.190 was observed. The lattice constant $a_{0}$ (A $l_{x}$G $a_{1-x}$ As)=5.6532+0.0084x.angs. was obtained at 300K which is in good Agreement with Vegard's law. In the GaAsSb system, although elastic lattice deformation was observed in (111) B-oriented crystals, misfit dislocations reduced the Poisson ratio to zero in (100)-oriented samples. When $a_{0}$ (GaSb)=6.0959 .angs. was assumed at 300K, both (100) and (111)B oriented GaAsSb layers deviated only slightly from Vegard's law. Both (100) and (111)B zero-mismatch $Al_{0.85}$ G $a_{0.15}$As-GaA $s_{1-y}$S $b_{y}$ layers were grown from melts with a weight ratio of $W_{sb}$ / $W_{Ga}$ =0.13 and a growth temperature of 840 to 820 .deg.C. The corresponding Sb compositions were y=0.015 and 0.024 on (100) and (111)B orientations, respectively. This occurs because of a fortuitous in the Sb distribution coefficient with orientation. Interface recombination velocity was estimated from the dependence of the effective minority carrier lifetime on double-heterojunction spacing, using either optical phase-shift or electroluminescence timedecay techniques. The recombination velocity at a (100) interface was reduced from (2 to 3)*10$^{4}$ for y=0 to (6 to 7)*10$^{3}$ cm/sec for lattice-matched $Al_{0.85}$G $a_{0.15}$As-GaA $s_{0.985}$S $b_{0.015}$ Although this reduction is slightly less than that expected from the exponential relationship between interface recombination velocity and lattice mismatch as found in the AlGaAs-GaAs system, solar cells constructed from such a combination of materials should have an excellent spectral response to photons with energies over the full range from 1.4 to 2.6 eV. Similar measurements on a (111) B oriented lattice-matched heterojunction produced some-what larger interface recombination velocities.ities.ities.s.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1694-1697
• /
• 2002

KEPCO is planing to adopt a preventive diagnostic system to obtain the reliability of transformer and GIS in 765kV substation. KEPRI has developed the preventive diagnostic system for 765kV substation since 1997. We used various sensors and fault detecting devices such as a dissolved gas analyzer in oil, a ultrasonic detector and LA leakage current detector, etc., and carried out adaptation tests at the both a laboratory and a site. We developed a data acquisition system, a communication control unit and a server system as well. Furthermore, monitoring program and diagnostic expert system were also developed. This paper describes the preventive diagnostic system for 765kV Sin-Ga-Pyong and Sin-Tae-Baek substations which will be operated from 2004.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.289-292
• /
• 2015

Most of the stars in the Galaxy are in binary systems. Binaries should be possible as the hosting stars of planets. Searching for planetary companions to binaries, especially evolved close binary stars, can provide insight into the formation and the ultimate fate of circumbinary planets and shed light on the late evolution of binary stars. In order to do this, we have chosen some post common envelope binaries including sdB-type eclipsing binaries and detached WD+dM eclipsing binaries as our targets and monitored them for several years. In this paper, we will present some of our new observations and results for three targets, NSVS 07826147, NSVS14256825 and RR Cae.

• Journal of Power System Engineering
• /
• v.15 no.3
• /
• pp.31-37
• /
• 2011

직조 금속 스크린 리브(rib) 이 바닥에 설치된 사각 덕트에서 열전달과 유체유동의 압력강하를 측정하기 위해 실험적 연구를 수행하였다. 시험부의 치수는 200 mm(W) ${\times}$ 40 mm(H) ${\times}$ 712 mm(L)이고 수력직경은 66.6 mm이다. 입구영역에는 1.72m 길이의 가열되지 않은 동일한 치수의 채널을 설치하였다. 메쉬가 다른 4가지의 직조금속 스크린 리브에 대해 측정하였다. 그리고 비교를 위해 일체형 리브에 대해서도 측정하였다. 국부 열전달 계수의 측정에는 스테인레스 강제 포일(foil) 히터와 T형 열전대률 이용하였다. 레이놀즈 수는 23,000에서 58,000의 범위이다. 덕트의 수력직경($D_h$)에 대한 직조 금속 리브의 높이(e)의 비($e/D_h$)는 0.075 이고 리브 간격(p)과 높이의 비(p/e)는 10이다. 실험 결과 메쉬가 없는 일체형 리입에서 가장 누셀트 수와 마찰계수가 컷다.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.486-491
• /
• 2014

In this paper, the adsorption behavior and kinetic characteristics of cibacron brilliant red 3B-A from aqueous solution using granular activated carbon were investigated. The effect of various parameters such as adsorbent dose, pH, initial concentration, contact time and temperature on the adsorption system were studied. Base on the estimated Langmuir constant ($R_L$) and Freundlich constant (1/n), This process could be employed as effective treatment method. From the Temkin constant (B) and Dubinin-Radushkevich constant (E), This adsorption process is physical adsorption. From kinetic experiments, the adsorption process followed the pseudo second order model with good correlation. Base on the Gibbs free energy and enthalpy, the adsorption of cibacron brilliant red 3B-A onto granular activated carbon was physisorption and endothermic in nature.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.535-538
• /
• 2000

Streptomyces lavendulae FRI-5 produces the ${\gamma}$-butyrolactone autoregulator IM-2, which is required for nucleoside antibiotic producetion. We have developed a system for introducing DNA into S. lavendule FRI-5 via conjugal transfer from Esherichia cole. Conditions were established for conjugation of the oriT-and attP-containing plasmid pSET152 from E. coli ET12567 (pUZ8002) to FRI-5. Conjugation resulted in integration of the plasmid at the chromosomal C31 attB site. The frequency of intergeneric conjugation varied with the medium used. The highest frequency ($1.6\times10-5$ per recipient) was obtained on ISP medium 2 containing 10mM MgCl2. Southern blot and phenotypic analyses of exconjugants revealed that S. lavendulae FRI-5 contains a unique C31 attB site, and that integration of heterologous DNA into the attB site did not interfere with morphological differentiation or IM-2-dependent signal transduction, including the production of a blue pigment. This system will now enable detailed genetic analysis of the regulation of antibiotic production in S. lavendulae FRI-5.