• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.503-526
• /
• 2016

In-plane and out-of-plane free vibration analysis of Timoshenko curved beams is addressed based on the isogeometric method, and an effective scheme to avoid numerical locking in both of the two patterns is proposed in this paper. The isogeometric computational model takes into account the effects of shear deformation, rotary inertia and axis extensibility of curved beams, and is applicable for uniform circular beams, and more complicated variable curvature and cross-section beams as illustrated by numerical examples. Meanwhile, it is shown that, the $C^{p-1}$-continuous NURBS elements remarkably have higher accuracy than the finite elements with the same number of degrees of freedom. Nevertheless, for in-plane or out-of-plane vibration analysis of Timoshenko curved beams, the NURBS-based isogeometric method also exhibits locking effect to some extent. To eliminate numerical locking, the selective reduced one-point integration and $\bar{B}$ projection element based on stiffness ratio is devised to achieve locking free analysis for in-plane and out-of-plane models, respectively. The suggested integral schemes for moderately slender models obtain accurate results in both dominated and non-dominated regions of locking effect. Moreover, this strategy is effective for beam structures with different slenderness. Finally, the influence factors of structural parameters of curved beams on their natural frequency are scrutinized.

• Journal of Korean Clinical Nursing Research
• /
• v.21 no.1
• /
• pp.43-52
• /
• 2015

Purpose: This study was aimed to develop the multicomponent intervention for preventing delirium among postoperative patients in a surgical intensive care unit (SICU). Methods: Using a quasi-experimental pre & post-test design with a non-equivalent control group, a total of 88 hospitalized patients in a SICU participated in this study. The 44 patients were allocated in each experimental and control group. The experimental group received the multicomponent intervention for delirium prevention including a delirium assessment and nursing intervention using a checklist, whereas the control group was provided with a standard care. The primary outcome of this study was the delirium incidence during the course of hospitalization. Results: There were no significant differences in the demographic and clinical characteristics between the two groups. The delirium occurred in 19.2% in the experimental group, whereas 38.6% in the control group ($x^2=4.526$, p<.05). Conclusion: The findings of the study demonstrated an effect of the multicomponent delirium prevention intervention in decreasing the delirium incidence rate over the standard care among the patients in SICU.

• Imaging Science in Dentistry
• /
• v.39 no.3
• /
• pp.115-120
• /
• 2009

Purpose : The purpose of this study was to determine a conversion coefficient for Hounsfield Units(HU) to material density ($g\;cm^{-3}$) obtained from cone-beam computed tomography ($CBMercuRay^{TM}$) data and to measure the hard tissue density based on the Hounsfield scale on dental head phantom. Materials and Methods : CT Scanner Phantom (AAPM) equipped with CT Number Insert consists of five cylindrical pins of materials with different densities and teflon ring was scanned by using the $CBMercuRay^{TM}$ (Hitachi, Tokyo, Japan) volume scanner. The raw data were converted into DICOM format and the HU of different areas of CT number insert measured by using $CBWorks^{TM}$. Linear regression analysis and Student t-test were performed statistically. Results : There was no significant difference (P > 0.54) between real densities and measured densities. A linear regression was performed using the density, $\rho$($g\;cm^{-3}$), as the dependent variable in terms of the HU (H). The regression equation obtained was $\rho=0.00072H-0.01588$ with an $R^2$ value of 0.9968. Density values based on the Hounsfield scale was $1697.1{\pm}24.9\;HU$ in cortical bone, $526.5{\pm}44.4\;HU$ in trabecular bone, $2639.1{\pm}48.7\;HU$ in enamel, $1246.1{\pm}39.4\;HU$ in dentin of dental head phantom. Conclusion : CBCT provides an effective option for determination of material density expressed as Hounsfield Units.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.160-169
• /
• 2007

The data used to develop distance-independent individual models for natural mixed forests were collected from 712 remeasured permanent sample plots (25,526 trees) of 10-year periodic from 1990 to 2000 in Baihe Forest Bureau of Changbai Mountains, northeast China. Based on analyzing relationship between diameter increment of individual trees with tree size, competitive status, and site condition, the diameter growth models for individual trees of 15 species growing in mixed-species uneven-aged forest stands, that have simple form, good predicting precision, and easily applicable, were developed using stepwise regression method. The main variables influencing on diameter increment of individual trees were tree size and competition, however, the site conditions were not significantly related with diameter increment. The tree size variables (lnDBH and $DBH^2$) were the most significant and important predictors of diameter growth existing in all 15 growth models. The diameter increment was directly proportional to tree diameter for each species. For the competitive factors in growth model, the relative diameter (RD), canopy closure (P), and the ratio of diameter of subject tree with maximum diameter (DDM) were contributed to the diameter increment at a certain extent. Other measures of stand density, such as basal area of stand (G) and stand density index (SDI), were not significantly influenced on diameter increment. Site factors, such as site index, slope and aspect were not important to diameter increment and excluded in the final models. The total variance explained by the final models of squared diameter increment ($R^2$) for all 15 species ranged from 35% to 72% and these results compared quit closely with those of Wykoff (1990) for mixed conifer stands. Using independent data set, validation measures were evaluated for predicting models of diameter increment developed in this study. The result indicated that the estimated precision was all greater than 94% and the models were suitable to describe diameter increment.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.521-526
• /
• 2006

We have studied the possibility of removing Anabaena macrospora by injecting copper sulfate ($CuSO_4{\cdot}5H_2O$) into the raw water of a drinking water purification plant. Anabaena macrospora caused the unpleasant geosmin odor of drinking water in August 2001. The cell break-point of A. macrospora was 0.3 mg/L of $CuSO_4$. We were able to reduce the standing crops of A. macrospora effectively because $CuSO_4$ could break A. macrospora selectively. Because 0.3 mg/L of $CuSO_4$ could break both cells and akinetes, it reduced the possibility of a recurrent problem for them to meet a favorable condition. When $CuSO_4$ was injected in the early growth phase of algae and the mixing intensity was high, A. macrospora could be removed most effectively. The odor caused by A. macrospora was sustained for a while without any sudden change of environmental condition. Therefore, we hope that it could shorten the period of obstacle by injecting the optimal amount of 0.3 mg/L of $CuSO_4$. The water quality, alkalinity, conductivity, hardness and pH didn't changed by the injection of $CuSO_4$.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.5
• /
• pp.526-535
• /
• 2019

Objective : While the risk of aneurysmal rebleeding induced by catheter cerebral angiography is a serious concern and can delay angiography for a few hours after a subarachnoid hemorrhage (SAH), current angiographic technology and techniques have been much improved. Therefore, this study investigated the risk of aneurysmal rebleeding when using a recent angiographic technique immediately after SAH. Methods : Patients with acute SAH underwent immediate catheter angiography on admission. A four-vessel examination was conducted using a biplane digital subtraction angiography (DSA) system that applied a low injection rate and small volume of a diluted contrast, along with appropriate control of hypertension. Intra-angiographic aneurysmal rebleeding was diagnosed in cases of extravasation of the contrast medium during angiography or increased intracranial bleeding evident in flat-panel detector computed tomography scans. Results : In-hospital recurrent hemorrhages before definitive treatment to obliterate the ruptured aneurysm occurred in 11 of 266 patients (4.1%). Following a univariate analysis, a multivariate analysis using a logistic regression analysis revealed that modified Fisher grade 4 was a statistically significant risk factor for an in-hospital recurrent hemorrhage (p=0.032). Cerebral angiography after SAH was performed on 88 patients ${\leq}3$ hours, 74 patients between 3-6 hours, and 104 patients >6 hours. None of the time intervals showed any cases of intra-angiographic rebleeding. Moreover, even though the DSA ${\leq}3$ hours group included more patients with a poor clinical grade and modified Fisher grade 4, no case of aneurysmal rebleeding occurred during erebral angiography. Conclusion : Despite the high risk of aneurysmal rebleeding within a few hours after SAH, emergency cerebral angiography after SAH can be acceptable without increasing the risk of intra-angiographic rebleeding when using current angiographic techniques and equipment.

• Investigative Magnetic Resonance Imaging
• /
• v.26 no.1
• /
• pp.32-42
• /
• 2022

Purpose: To evaluate the clinical benefit of 2D contrast-enhanced T2 fluid-attenuated inversion recovery (CE-T2 FLAIR) image for detecting leptomeningeal metastasis (LM) in the brain metastasis work-up for lung cancer. Materials and Methods: From June 2017 to July 2019, we collected all consecutive patients with lung cancer who underwent brain magnetic resonance image (MRI), including contrast-enhanced 3D fast spin echo T1 black-blood image (CE-T1WI) and CE-T2 FLAIR; we recruited clinico-radiologically suspected LM cases. Two independent readers analyzed the images for LM in three sessions: CE-T1WI, CE-T2 FLAIR, and their combination. Results: We recruited 526 patients with suspected lung cancer who underwent brain MRI; of these, we excluded 77 (insufficient image protocol, unclear pathology, different contrast media, poor image quality). Of the 449 patients, 34 were clinico-radiologically suspected to have LM; among them, 23 were diagnosed with true LM. The calculated detection performance of CE-T1WI, CE-T2 FLAIR, and combined analysis obtained from the 34 suspected LM were highest in the combined analysis (AUC: 0.80, 0.82, and 0.89, respectively). The inter-observer agreement was also the highest in the combined analysis (0.68, 0.72, and 0.86, respectively). In quantitative analyses, CNR of CE-T2 FLAIR was significantly higher than that of CE-T1WI (Wilcoxon signed rank test, P < 0.05). Conclusion: Adding CE-T2 FLAIR might provide better detection for LM in the brain-metastasis screening for lung cancer.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.526-530
• /
• 2007

The effects of kwamaegi (0, 6, 12 and 18%, all w/w) on the quality characteristics of Kimchi during fermentation at $10^{\circ}C$ were investigated. The mixtures are denoted KK. The late of decrease in pH during KK fermentation was lower than that of control. The number of total microbes (T) in Kimchi controls fermented for 14 days did not differ, and were in the range of $8.64{\sim}8.68\;log\;CFU/g$, whereas the numbers of lactic acid bacteria (L) in KK were higher than in controls. The L/T(%) was 78.41 in control, 85.76 in 6% KK and $93.68{\sim}94.25%$ in the 16% or 18% KK samples. The hardness of tissue ($2.98{\sim}3.66{\times}10^7\;dyne/cm^2$) in KK fermented for 14 days was higher than that of control ($2.67{\times}10^7\;dyne/cm^2$). The content of alcohol-insoluble substances in KK juice (1.281.08 g/100 g) was lower than that of control (1.45 g/100 g). In sensory evaluation, the appearance and texture of KK were better than those of control. Although some fishy flavor was noted in KK, this did not affect acceptability. Sourness was less, whereas ripened taste and overall acceptability were higher in KK (especially 12% KK) compared to control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.526-543
• /
• 2000

Finite element analyses were performed to study effects on stress distribution generated in jaw bone for various shapes of dental implants: plateau type, plateau with small radius of curvature, triangular thread screw type in accordance with ISO regulations and square thread screw filleted with small radius partially. It was found that square thread screw filleted with small radius was more effective on stress distribution than other dental implants used in analyses. Additional analyses were performed on the implant with square thread screw filleted with small radius for very-ing design parameters, such as the width of thread end, the height of the thread of the implant and load direction, to determine the optimum dimensions of the implant. The highest stress concentration occurred at the region in jaw Pone adjacent to the first thread of the implant. The maximum effective stress induced by a 15 degree oblique load of 100 N was twice as high as the maximum effective stress caused by an equal amount of vertical load. Stress distribution was more effective in the case when the width of thread end and the height of thread were p/2 and 0.46p, respectively, where p is the pitch of thread. At last, using tensile force calculated from the possible insert torque without breading bone thread, finite element analysis was performed on the implant to calculate pre-stress when the primary fixation of the implant was operated in jaw bone. The maximum effective stress was 136.8 MPa which was proven to be safe.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1457-1460
• /
• 2010

최근 기후변화로 인해 태풍 등과 같은 집중성 강우가 많이 발생하고 있고, 강우시 유출 등으로 인한 유역내 발생하는 토양침식으로 인해 유역의 하천을 비롯하여 유출구에서의 탁수 및 유사 발생 문제는 우리나라 뿐만 아니라 전 세계적으로 심각한 환경문제로 대두되고 있다. 강우시 유역에서 발생하는 이러한 탁수문제를 효과적으로 해결하기 위하여 여러 최적관리기법 (Best Management Practices, BMPs) 들이 제안되어왔다. 본 연구의 목적은 볏짚매트 사용으로 인한 토양유실 저감 실측자료를 바탕으로 볏짚매트를 다양한 경사지 밭에 적용하였을 경우 유역에서의 토양유실 저감효과를 평가하기 위한 모델링 기법을 개발하는데 있다. 볏짚 매트의 효과를 Soil and Water Assessment Tool (SWAT) 모형으로 모의하기 위해서는 볏짚매트의 효과를 모형에서 반영할 수 있는 인자를 선택하여 최적의 인자값을 산정해야 한다. 본 연구에서는 유사 저감 효과 실험 결과를 VFSMOD-W 모형을 이용하여 USLE P 인자값을 도출하였으며, 경사도에 따른 USLE-P 값을 산정하여, SWAT 모형에 입력자료로 사용하였다. 분포형 모형과는 달리 준분포형 모형인 SWAT 모형은 소유역내 수문학적 반응단위별로 유출, 유사, 그리고 비점오염 발생을 평가하는데 이때 Hydrologic Response Unit (HRU)의 지형정보가 활용된다. 이 지형정보는 SWAT 유사 평가시 매우 민감한 변수중의 하나이기 때문에 유역 단위 유사 평가시 정확한 지형자료의 입력이 요구된다. 그러나 SWAT 모형은 소유역내 HRU의 경사도 및 경사장을 직접 산정하지 않고, 소유역의 평균경사도를 기준으로 하여 산정된 경사도를 소유역내 모든 HRU에 동일하게 적용하는 단점이 있다. 본 연구에서는 준분포 모형인 SWAT 모형의 단점을 개선하기 위하여 SWAT Spatially Distributed (SD)-HRU를 적용하였다. 이를 통해 다양한 경사지 밭에서의 볏짚매트의 효과를 분석할 수 있게 되었다. 볏짚매트 미적용시 모의 기간내 유사량 총합은 74,954.42 ton 이고, 월평균 유사량은 814.72 ton 으로 산정되었고, 볏짚매트를 적용하였을 경우 모의 기간내 (2000년 1월 - 2007년 8월) 유사량 총합은 48,460.55 ton 이고, 월평균 유사량은 526.75 ton 으로 볏짚매트를 적용하지 않았을 때보다 약 35.35 % 저감된 값을 보였다. SD-HRU를 적용하고 각 농경지의 경사도에 따라 USLE P 값을 수정하여 볏짚매트에 의한 효과를 분석하였을 때, 볏짚매트를 적용하지 않았을 때 보다 볏짚매트를 적용하였을 때 모의 기간내 약 35% 정도의 유사량이 감소된 것을 알 수 있었다. 본 연구결과에서 보여주는 바와 같이 고랭지 지역에서의 영농활동 시 볏짚매트를 설치한다면 강우시 발생하는 토양유실을 효과적으로 저감시킬 수 있을 것이라 판단된다.