• 제목/요약/키워드: P-waves

검색결과 468건 처리시간 0.023초

가변 주파수 Sono-Fenton 산화를 이용한 Spent-GAC 재생기술 (Spent-GAC Regeneration Using Variable Frequency Sono-Fenton Oxidation)

  • 주수빈;이상민;김형준;심인태;김희진
    • 대한토목학회논문집
    • /
    • 제43권4호
    • /
    • pp.449-458
    • /
    • 2023
  • 용존 유기물을 흡착 제거하는 기술로서, 흡착능이 우수한 입상활성탄을 우선적으로 적용할 수 있지만, 흡착탑의 운전기간에 따라 GAC의 흡착능이 현저히 저하되어 파과되는 한계가 있으며 파과된 활성탄인 spent-GAC는 교체나 재생이 불가피하다. 활성탄 교체는 비용의 경제성 때문에 기피되며 상업적으로 열재생법을 사용하고 있으나, 800℃ 이상의 고온 조건으로 인한 높은 에너지 비용과 활성탄의 질량 손실이 발생하는 단점이 있다. 본 연구에서는 CSOs내의 용존 유기물 처리에 사용된 spent-GAC의 재생효율을 제고하기 위해, Fenton 산화법과 초음파 산화를 융합한 다중산화기술인 Sono-Fenton 방법을 적용하였고, 산화제 주입농도와 초음파 주파수별 spent-GAC의 재생효율을 조사하였다. 적용된 Sono-Fenton 처리에서 Fe2+ 10 mmol/L, H2O2 농도 1,000 mmol/L, 120분 초음파 주사시간, 초음파 주파수 40 kHz 재생처리 조건에서 68.5%의 가장 높은 재생효율을 얻을 수 있었고, 750 kHz에서도 유사한 효율을 얻을 수 있었으며, 다른 주파수의 초음파는 재생효율이 불량했고 주파수의 크기와 GAC 재생효율은 선형 관계를 나타내지 않았다. 실 하수를 희석하여 제조한 CSOs로 GAC 흡착탑을 연속운전 한 경우, 재생없이 700시간 내외의 운전이 가능했고 1회의 Sono-Fenton 처리를 적용한 결과, 총 1,000시간의 GAC 흡착 운전 기간 동안 40~70%의 CODcr 제거 효율이 확보하였다.

Maze 수술 후 동율동 및 좌심방 수축능 회복에 대한 좌심방 부피 감소 성형술의 영향 (Effect of Left Atrial Volume Reduction with Maze Operation on Sinus Conversion and Recovery of Left Atrial Transport Function)

  • 홍성범;류상완;정은경;정인석;범민선;박정민;이교선;김상형;안병희
    • Journal of Chest Surgery
    • /
    • 제38권11호
    • /
    • pp.739-745
    • /
    • 2005
  • 배경: Maze술식은 심방 세동의 치료에 있어 중요한 방법으로 받아들여지고 있으나 몇 가지 요인, 특히 좌심방 크기가 클수록 전환율이 감소하는 것으로 알려져 있다. 본 연구에서는 류마티스성 승모판막 질환과 동반된 심방 세동 환자에서 좌심방 부피 감소 성형술과 함께 시행한 Maze술식의 효과에 대해 알아보고자 하였다. 대상 및 방법 : 2001년 12월부터 2004년 7월까지 류마티스성 승모판막 질환과 동반한 심방 세동에 대해 총 45명의 환자에서 수술을 시행하였다. 좌심방 부피 감소 성형술을 시행하지 않은 경우를 L군, 시행한 경우를 2군으로 구분하고, 수술 후 7일, 3개월, 그리고 6개월에 동율동 전환과 A파 발견율을 비교 분석하였다. 평균 추적 관찰 기간은 1군과 2군에서 각각 $15.8\pm10.1$개월, $6.1\pm2.7$개월이었다. 결과: 수술 후 동율동 전환기간은 1군과 2군에서 각각 $9.88\pm12.2$일, $1\pm3.6$일 (p<0.01)이었다. 동율동 전환율은 1군과 2군에서 각각 수술 후 7일에 $65\%,\;75\%$ (p=0.07), 수술 후 3개월에 $70.5\%,\;100\%$ (p<0.01),수술 후 6개월에 $93\%,\;100\%$(p<0.01)였다. A파 발견율은 1군과 2군에서 수술 후 7일에 $31.2\%,\;83.3\%$, 3개월에 $63.6\%,\;100\%$, 6개월에 $71.4\%,\;100\%$였다. 결론: 본 연구에서 류마티스성 승모판 질환에 동반된 심방 세동 환자에서 좌심방 부피 감소 성형술과 함께 시행한 Maze 술식이 수술 후 동율동 전환율이나 좌심방 수축능 회복에 좋은 결과를 보여주었다 그러나 향후 대상환자들에 대한 중장기적인 추적 관찰이 필요하리라 생각한다.

한반도의 폭파자료에 대한 2-D 수치 모델링 연구 (2-D Forward Modeling on an Explosion Data in Korea)

  • 강익범;조광현
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2007년도 정기총회 및 학술발표대회
    • /
    • pp.137-139
    • /
    • 2007
  • 한반도의 지각에 대한 지진파의 파형들을 피킹하기 위하여 한반도의 남동부지역에서 시행된 폭파로부터 각 관측소에서 관측된 지진자료를 2 차원 수치 순산모델링으로 계산된 이론적인 신호와 비교하였다. 실제 지진자료와 같은 완전한 파형을 얻기 위해서는 실체파뿐만 아니라 표면파를 포함한 모든 파형을 이론적으로 생성하여야 한다. 또한, 각 파형의 Q 값을 고려하여 그 감쇄 정도를 파악하여야 실제 파형과 똑 같은 이론적인 파형을 만들 수 있다. 본 연구에서는 FEM(Finite Element Method)과 FDM(Finite Difference Method) 같은 전형적인 수치 모델링 기법 대신에 수도스펙트럼기법(pseudo-spectral method)을 사용하여 이론적인 파형을 계산하였다. Q 값을 고려하지 않았기 때문에 완전한 파형을 얻기에는 어려움이 있었다. 그러나 각 관측소에 도달하는 실체파의 초기 파형들의 주시를 실제 파형과 맞추었다는 데에 그 성과가 있다고 할 수 있다. 본 연구의 궁극적인 목표는 수치 모델링을 통하여 지진원의 위치와 종류를 밝혀 내는데 그 정확성을 높이는 것이다.

  • PDF

Kern County 지진에 대한 연구 (A study of Kem County earthquake)

  • 김준경
    • 지질공학
    • /
    • 제2권2호
    • /
    • pp.155-165
    • /
    • 1992
  • 본 연구는 한반도의 지진지체구조 특성에 부합되는 내진설계용 부지응답 스펙트럼 작성을 위한 유사지진 선정에 관한 연구이다. Seismic Moment Tensor를 이용 파형을 Inversion한 결과에 의하면 지진원 특성상, Kern Conty 지진(1952년 7월 21일, 리히터 규모 ML = 7.2)은 한반도 지진지체구조 특성에 부합되는 현실적으로 유사한 외국의 지진들 중의 하나로서, 선정된 Kern Conty 지진으로 부터 발생한 강지진동 자료를 전산처리하여 표준응답 스펙트럼과 일반적 특성을 비교하여 보는 일도 의미있는 일이라고 할 수 있다.

  • PDF

심장판막치환환자의 심전도적 술후 추적 (Electrocardiographic follow-up after mitral valve replacement)

  • 김종환
    • Journal of Chest Surgery
    • /
    • 제17권2호
    • /
    • pp.231-243
    • /
    • 1984
  • Despite its known limitation in the diagnostic value, the electrocardiography is one of the most common and routine examinations in the management of the patients with cardiac problems. The clinical results of 291 patients who underwent isolated mitral valve replacement from October 1978 to June 1983 were already reported. Their electrocardiograms were studied to assess the value of electrocardiographic examination in following the patients after valve replacement. The patients were divided into 5 groups beforehand according to the types of valve lesion on the bases of preoperative diagnosis and operative findings: Groups I: stenosis, I1: stenosis-dominant mixed, II1: equally mixed, IV: insufficiency-dominant mixed, and V: insufficiency. Their preoperative cardiac rhythm was sinus in 39.2% and atrial fibrillation in 59.1% of the patients. Seventy-three [42.4%] of the patients with atrial fibrillation gained sinus rhythm after operation, occurring in 67 from the day of surgery, and 42 returned to atrial fibrillation while 37 kept sinus rhythm at the follow-up end [mean follow-up period, 13.4\ulcorner1.4 months]. The P waves on the electrocardiograms of the preoperative sinus rhythm in 114 patients were normal in 5.3% and the findings of left atrial enlargement in 94.7% of the cases. They were normal in 42.1% and the findings of left atrial enlargement in 57.9% of the 140 patients with sinus rhythm at the follow-up. The preoperative major chamber enlargement was the right ventricle in Group I while it was the left ventricle in Group V, and it was in-between in Groups II-IV. The postoperative regression of the findings in ventricular enlargement was statistically significant only in Groups I and V. These results may suggest the importance of the serial electrocardiograms in following the patients with mitral valve replacement on the bases of outpatient. The electrocardiographic follow-up data were presented in patients with suspected or proved tissue valve failures.

  • PDF

A Comparative Study of Methods of Measurement of Peripheral Pulse Waveform

  • Kang, Hee-Jung;Lee, Yong-Heum;Kim, Kyung-Chul;Han, Chang-Ho
    • 대한한의학회지
    • /
    • 제30권3호
    • /
    • pp.98-105
    • /
    • 2009
  • Objective: Increased aortic and carotid arterial augmentation index (AI) is associated with the risk of cardiovascular disease. The most widely used approach for determining central arterial AI is by calculating the aortic pressure waveform from radial arterial waveforms using a transfer function. But how the change of waveform by applied pressure and the pattern of the change rely on subject's characteristics has not been recognized. In this study, we use a new method for measuring radial waveform and observe the change of waveform and the deviation of radial AI in the same position by applied pressure. Method: Forty-six non-patient volunteers (31 men and 15 women, age range 21-58 years) were enrolled for this study. Informed consent in a form approved by the institutional review board was obtained in all subjects. Blood pressure was measured on the left upper arm using an oscillometric method, radial pressure waves were recorded with the use of an improved automated tonometry device. DMP-3000(DAEYOMEDI Co., Ltd. Ansan, Korea) has robotics mechanism to scan and trace automatically. For each subject, we performed the procedure 5 times for each applied pressure level. We could thus obtain 5 different radial pulse waveforms for the same person's same position at different applied pressures. All these processes were repeated twice for test reproducibility. Result: Aortic AI, peripheral AI and radial AI were higher in women than in men (P<0.01), radial AI strongly correlated with aortic AI, and radial AI was consistently approximately 39% higher than aortic AI. Relationship between representative radial AI of DMP-3000 and peripheral AI of SphygmoCor had strongly correlation. And there were three patterns in change of pulse waveform. Conclusion: In this study, it is revealed the new device was sufficient to measure how radial AI and radial waveform from the same person at the same time change under applied pressure and it had inverse-proportion to applied pressure.

  • PDF

Advances in Ultrasonic Testing of Austenitic Stainless Steel Welds

  • Moysan, J.;Ploix, M.A.;Corneloup, G.;Guy, P.;Guerjouma, R. El;Chassignole, B.
    • 비파괴검사학회지
    • /
    • 제28권3호
    • /
    • pp.245-253
    • /
    • 2008
  • A precise description of the material is a key point to obtain reliable results when using wave propagation codes. In the case of multipass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Two main advances are presented in the following. The first advance is a model which describes the anisotropy resulting from the metal solidification and thus the model reproduces an anisotropy that is correlated with the grain orientation. The model is called MINA for modelling anisotropy from Notebook of Arc welding. With this kind of material model1ing a good description of the behaviour of the wave propagation is obtained, such as beam deviation or even beam division. But another advance is also necessary to have a good amplitude prediction: a good quantification of the attenuation, particularly due to grain scattering, is also required as far as attenuation exhibits a strong anisotropic behaviour too. Measurement of attenuation is difficult to achieve in anisotropic materials. An experimental approach has been based both on the decomposition of experimental beams into plane waves angular spectra and on the propagation modelling through the anisotropic material via transmission coefficients computed in generally triclinic case. Various examples of results are showed and also some prospects to continue refining numerical simulation of wave propagation.

Amplification based on shear wave velocity for seismic zonation: comparison of empirical relations and site response results for shallow engineering bedrock sites

  • Anbazhagan, P.;Aditya, Parihar;Rashmi, H.N.
    • Geomechanics and Engineering
    • /
    • 제3권3호
    • /
    • pp.189-206
    • /
    • 2011
  • Amplification based on empirical relations is widely used for seismic microzonation of urban centers. Amplifications are used to represent the site effects of a particular soil column. Many empirical correlations are available to estimate the amplification of seismic waves. These correlations are based on the ratio of shear wave velocity of foundation/rock to soil velocity or 30 m equivalent shear wave velocity ($Vs^{30}$) and are developed considering deep soil data. The aim of this work is to examine the applicability of available amplification relations in the literature for shallow engineering bedrock sites by carrying out site response studies. Shear wave velocity of thirteen sites having shallow engineering bedrock have been selected for the study. In these locations, the depth of engineering bedrock (> 760 ${\pm}$ 60 m/s) is matched with the drilled bore hole. Shear wave velocity (SWV) has been measured using Multichannel Analysis of Surface Wave survey. These sites are classified according to the National Earthquake Hazards Reduction Program (NEHRP) classification system. Amplifications for an earthquake are arrived for these sites using empirical relations and measured SWV data. Site response analysis has been carried out in SHAKE using SWV and using synthetic and real earthquake data. Amplification from site response analysis and empirical relations are compared. Study shows that the amplification arrived using empirical relations does not match with the site response amplification. Site response amplification is much more than empirical values for same shear wave velocity.

음파검층에서의 속도결정 - monopole및 dipole소스의 비교 - (Sonic Velocity Determination using Data from Monopole and Dipole Sources)

  • 공남영;이성진;;김영화
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2006년도 공동학술대회 논문집
    • /
    • pp.225-231
    • /
    • 2006
  • 음파검층을 사용하여 획득한 파형으로부터 정확한 속도분석을 하기 위한 연구의 일환으로 일반적으로 많이 이용되고 있는 STC 방법(Slowness-Time Coherence)을 비롯하여, 파의 분산성을 고려한 Tang et al.의 방법(1995)을 검층시험용 모형공에 적용해 보고 그 결과를 비교하였다. P파와 Stoneley파 에서는 매우 일관된 속도값을 보여 STC방법의 효과가 확인되었다. Tang et al.의 방법(1995)에서 구해진 S파 속도는 monopole source의 S파속도와 잘 일치되고 dipole source의 자료에 대한 monopole technique의 STC방법에서의 S파속도 범위 내에 있는 것이 확인되었다.

  • PDF

미생물 발효 영지버섯 추출액의 다당체에 관한 연구 (Studies on the Polysaccharide of Ganoderma lucidium Extract by Microorganism Fermentation)

  • 황유연;정명수;김혜자;이기남
    • 동의생리병리학회지
    • /
    • 제21권6호
    • /
    • pp.1506-1512
    • /
    • 2007
  • In order to investigate the totale yield, the content of soluble polysaccharide and the others of FEW extract from the yeast fermentated Ganoderma lucidium by supersonic method, the yeast strain was inoculated after pretreatment and subsequently followed fermentation and supersonic extract. The main construction of the extract method is composed of the main glucose and together with the xylose, fucose, galactose and mannose. Results show that because of the generated lactic acid and ethanol, pH value of extract decreases and the safety as well as the preservation is improved. The extract yield, the total soluble polysaccharide, SOD-like activity, cytotoxic effect and growth inhibitory effect against cancer cell line are much higher in FE method than RE method, especially FEW3 extracts fermented during 24hrs. It is concluded that yeast fermentation makes the extract yield increase because of the cell disintegration, the useful ingredients of the germ body, the metabolic products, the insoluble ingredients due to the generation of ethanol, and the cell fragmentation caused by the supersonic waves vibration. Content of generated ethanol, total soluble polysaccharide and extract yield all increase during the fermentation time from 24 to 72 hours and the optimum fermentation condition is at $27^{\circ}C$ for 72 hours. The bitter taste and smell of the Ganoderma lucidium extract is diminished, fragrant-bitter taste and smell is generated so that the whole functional quality is improved.