• Korean Journal of Food Science and Technology
• /
• v.54 no.4
• /
• pp.431-436
• /
• 2022

This study optimized the finely ground meat ball analogue formulation by a series of experiments. Replacing isolated soy protein (ISP) to isolated mung bean protein (IMP) in total 27% protein caused an increase in hardness while adhesiveness, springiness, and chewiness were decreased (p<0.05), and the best ISP to IMP ratio was 10:17. When protein content was changed from 19% (w/w) to 31% (w/w) with the best ISP:IMP ratio, adhesiveness was increased with decreasing protein content, but all texture profiles were greatly decreased comparing to control (p<0.05). To modify texture of plant meat ball, potato starch (PS), κ-carrageenan (KC), methyl cellulose (MC), konjac (KJ), and potato protein (PP) were applied in formulation. Finally, KJ and MC were combined with and without PP in formulation. As a result, 0.5% KJ+MC+PP and 1% KJ+MC were best formulation for plant meat ball, nevertheless, highly harder texture than control must be regulated which warranted further exploration.

• Journal of Life Science
• /
• v.33 no.3
• /
• pp.268-276
• /
• 2023

This study was conducted to optimize the formulation conditions of the immediate-release layer of carvedilol in the development of a two-layer tablet formulation for carvedilol and ivabradine. Using a 2⁴+3 full-factorial design of experiments, excipients (microcrystalline cellulose, citric acid, and crospovidone) of the carvedilol immediate-release layer (wet granulation part) and process parameters for the tablet compression process (main compression) were optimized, and seven types of each dependent variable (assay, content uniformity, hardness, friability, disintegration, and dissolution [pH 1.2 and 6.8]) were evaluated using design expert software. The analysis of variance results confirmed that the main compression has a significant effect on hardness, friability, and disintegration time and that microcrystalline cellulose has a major effect on friability and dissolution. In addition, it was confirmed that citric acid has a significant effect on friability. Crospovidone affects friability and dissolution. According to the design space from the design of the experiment results, the optimized range is microcrystalline cellulose (~18.0-32.0 mg), citric acid (~0.5-12 mg), and main compression (~615-837 kgf). Consequently, this study confirmed the availability of manufacturing the carvedilol immediate-release layer in which all risk factors evaluated in the initial risk assessment are removed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.587-594
• /
• 2023

In this paper, we present the design and optimization process of an on-body microstrip patch antenna with a paired T-type defect for monitoring fracture recovery of human legs. This antenna is designed to be light, thin and compact despite the improvement of return loss and bandwidth performance by adjusting the size of the T-type defect. The structure around the applied human leg is structured as a 5-layer dielectric plane, and the complex dielectric constant of each layer is calculated using the 4-pole Cole-Cole model parameters. In a normal case without bone fracture, the return loss of the on-body antenna is -66.71dB at 4.0196GHz, and the return loss difference ΔS₁₁ is 37.95dB when the gallus layer have a length of 10.0mm, width of 1.0mme, and height of 2.0mm. A 3'rd degree polynomial is presented to predict the height of the gallus layer for the change in return loss, and the polynomial has a very high prediction suitability as RSS = 1.4751, R² = 0.9988246, P-value = 0.0001841.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.157-162
• /
• 2015

The result of respiration amount on the growth step of P. ostreatus shows as follows. On the early and middle mycelial culture step, respiration amount per minute in the 16 bottles(850cc) maintained 184.75ppm, 185.8ppm respectively. Therefore we are able to calculate how much fresh air replace in the growth chamber for optimization optimal CO₂ amount. This means early respiration amount was increased than middle a little on the proceeding mycelial culture. On the early, middle, last and post harvest growth step, the respiration amount per minute in the 16 bottles (850cc) maintained 154.5ppm, 148.1ppm, 157.1ppm and 101.6ppm respectively.

• Journal of Life Science
• /
• v.33 no.7
• /
• pp.593-604
• /
• 2023

The ocean accounts for over 70% of the Earth's surface and is a space of largely unexplored unknowns and opportunities. Korea is a peninsula surrounded by the sea on three sides, emphasizing the importance of marine research. The ocean has an extremely complex environment with immense biological diversity. In terms of microbiology, the marine environment has varying factors like extreme temperature, pressure, solar radiation, salt concentration, and pH, providing ecologically unique habitats. Due to this variety, marine organisms have very different phylogenetic classifications compared with terrestrial organisms. Although various microorganisms inhabit the ocean, studies on the diversity, isolation, and cultivation of marine microorganisms and the secondary metabolites they produce are still insufficient. Research on bioactive substances from marine microorganisms, which were rarely studied until the 1990s, has accelerated in terms of natural products from marine Actinomycetes since the 2000s. Since then, industries for bioplastic and biofuel production, carbon dioxide capture, probiotics, and pharmaceutical discovery and development of antibacterial, anticancer, antioxidant, and anti-inflammatory drugs using bacteria, archaea, and algae have significantly grown. In this review, we introduce current research findings and the latest trends in life science and biotechnology using marine microorganisms. Through this article, we hope to create consumer awareness of the importance of basic and applied research in various natural product-related discovery fields other than conventional pharmaceutical drug discovery. The article aims to suggest pathways that may boost research on the optimization and application of future marine-derived materials.

• Journal of the Korean earth science society
• /
• v.44 no.1
• /
• pp.79-89
• /
• 2023

The purpose of this study was to investigate the effects of engineering design-based ocean cleanup classes on STEAM attitudes and creative engineering problem-solving dispositions. Furthermore, during this process, we tried to determine interesting points that students encountered in engineering design-based classes. For this study, a science class with six lessons based on engineering design was developed and reviewed by a professor who majored in engineering design, along with five engineering design experts with a master's degree or higher. The subject of the class was selected as the design and implementation of scientific and engineering measures to reduce marine pollution based on the method implemented in an actual Ocean Clean-up Project. The engineering design process utilized the engineering design model presented by NGSS (2013), and was configured to experience redesign through the optimization process. To verify effectiveness, the STEAM attitude questionnaire developed by Park et al. (2019) and the creative engineering problemsolving propensity test tool developed by Kang and Nam (2016) were used. A pre and post t-test was used for statistical analysis for the effectiveness test. In addition, the contents of interesting points experienced by the learners were transcribed after receiving descriptive responses, and were analyzed and visualized through degree centrality analysis. Results confirmed that engineering design in science classes had a positive effect on both STEAM attitude and creative engineering problem-solving disposition (p< .05). In addition, as a result of unstructured data analysis, science and engineering knowledge, engineering experience, and cooperation and collaboration appeared as factors in which learners were interested in learning, confirming that engineering experience was the main factor.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.370-385
• /
• 2023

Cyanobacterial harmful algal blooms (Cyano-HABs) are an international environmental problem that negatively affects the ecosystem as well as the safety of water resources by discharging cyanotoxins. In particular, the discharge of microcystins (MCs), a highly toxic substance, has been studied most actively, and various water treatment methods have been proposed for this purpose. In this paper, we reviewed adsorption technology, which is recognized as the most feasible, economical, and efficient method among suggested treatment methods for removing MCs. Activated carbons (AC) are widely used adsorbents for MCs removal, and excellent MCs adsorption performance has been reported. Research on alternative adsorption materials for AC such as biochar and biosorbents has been conducted, however, their performance was lower compared to activated carbon. The impacts of adsorbent properties(characteristics of pore surface chemistry) and environmental factors (solution pH, temperature, natural organic matter, and ionic strength) on the MCs adsorption performance were also discussed. In addition, toward effective control of MCs, the possibility of the direct removal of harmful cyanobacteria as well as the removal of dissolved MCs using adsorption strategy was examined. However, to fully utilize the adsorption for the removal of MCs, the application and optimization under actual environmental conditions are still required, thereby meeting the environmental and economic standards. From this study, crucial insights could be provided for the development and selection of effective adsorbent and subsequent adsorption processes for the removal of MCs from water resources.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.228-232
• /
• 2006

Purpose: electrophilic $^{18}F(T_{1/2}=110\;min)$ radionuclide in the form of $[^{18}F]F_2$ gas is of great significance for labeling radiopharmaceuticals for positron omission tomography (PET). However, its production In high yield and with high specific radioactivity is still a challenge to overcome several problems on targetry. The aim of the present study was to develop a method suitable for the routine production of $[^{18}F]F_2$ for the electrophilic substitution reaction. Materials and Methods: The target was designed water-cooled aluminum target chamber system with a conical bore shape. Production of the elemental fluorine was carried out via the $^{18}O(p,n)^{18}F$ reaction using a two-step irradiation protocol. In the first irradiation, the target filled with highly enriched $^{18}O_2$ was irradiated with protons for $^{18}F$ production, which were adsorbed on the inner surface of target body. In the second irradiation, the mixed gas ($1%[^{19}F]F_2/Ar$) was leaded into the target chamber, fellowing a short irradiation of proton for isotopic exchange between the carrier-fluorine and the radiofluorine absorbed in the target chamber. Optimization of production was performed as the function of irradiation time, the beam current and $^{18}O_2$ loading pressure. Results: Production runs was performed under the following optimum conditions: The 1st irradiation for the nuclear reaction (15.0 bar of 97% enriched $^{18}O_2$, 13.2 MeV protons, 30 ${\mu}A$, 60-90 min irradiation), the recovery of enriched oxygen via cryogenic pumping; The 2nd irradiation for the recovery of absorbed radiofluorine (12.0 bar of 1% $[^{19}F]fluorine/argon$ gas, 13.2 MeV protons, 30 ${\mu}A$, 20-30 min irradiation) the recovery of $[^{18}F]fluorine$ for synthesis. The yield of $[^{18}F]fluorine$ at EOB (end of bombardment) was achieved around $34{\pm}6.0$ GBq (n>10). Conclusion: The production of $^{18}F$ electrophilic agent via $^{18}O(p,n)^{18}F$ reaction was much under investigation. Especially, an aluminum gas target was very advantageous for routine production of $[^{18}F]fluorine$. These results suggest the possibility to use $[^{18}F]F_2$ gas as a electrophilic substitution agent.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.31-41
• /
• 2011

To optimize the natural chemical agents against nuisance phytoplankton, we examined algal removal activity (ABA) of Plant-Mineral Composite (PMC), which already developed by our teams (Kim et al., 2010), on various conditions. The PMC are consisted of extracted-mixtures with indigenous plants (Camellia sinensis, Quercusacutissima and Castanea crenata) and minerals (Loess, Quartz porphyry, and natural zeolite), and characterized by coagulation and floating of low-density suspended solids. A simple extraction process was adopted, such as drying and grinding of raw material, water-extraction by high temperature-sonication and filtering. All tests were performed in 3 L plastic chambers varying conditions; six different concentrations ($0{\sim}1.0\;mL\;L^{-1}$), six light intensities ($8{\sim}1,400\;{\mu}mol\;m^{-2}s^{-1}$), three temperatures ($10{\sim}30^{\circ}C$), four pHs (7~10), five water depths (10~50 cm), and three different waters dominated by cyanobacteria, diatom, and green algae, respectively. Results indicate that the highest ABA of PMC was seen at $0.05\;mL\;L^{-1}$ in treatment concentrations, where showed a reduction of more than 80% of control phytoplankton biomass, while $1,400\;{\mu}mol\;m^{-2}s^{-1}$ in light intensity (>90%), $20{\sim}30^{\circ}C$ temperature (>60%), 7~9 in pH (>90%), below 50 cm in water depth (>90%), and cyanobacterial dominating waters (>80%), respectively. Over the test, ABA of PMC were more obvious on the algal biomass (chlorophyll-${\alpha}$) than suspended solids, suggesting a selectivity of PMC to particle size or natures. These results suggest that PMC agents can play an important role as natural agents to remove the nuisant algal aggregates or seston of eutrophic lake, where occur cyanobacterial bloom in a shallow shore of lake during warm season.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1832-1838
• /
• 2010

The objective of this study was to improve the flavor of Cheonggukjang prepared by the culture optimization of starter with the fibrinolytic activity. After 25 strains isolated from the commercial Cheonggukjang and Doenjang in different regions were compared, 7 Bacillus strains with proteolytic and slime-producing activities were selected. When the fibrin plate method for fibrinolytic activity was applied, CJJN-4 and 5 showed the higher activity in tripticase soy broth (TSB). All Cheonggukjang prepared with CJJN-4 and 5 also had the fibrinolytic activity, regardless of culture temperature or time. Especially, Cheonggukjang prepared at $40^{\circ}C$ showed higher activity than $45^{\circ}C$, and Cheonggukjang prepared with CJJN-4 for 48 hr at $40^{\circ}C$ showed the highest fibrinolytic activity. Although there was no significant difference in pH of Cheonggukjang prepared with CJJN-4 or 5 during 72 hr at $40^{\circ}C$, Cheonggukjang prepared with CJJN-4 at $45^{\circ}C$ had lower pH until 60 hr than $40^{\circ}C$ or CJJN-5. The total amino type nitrogen contents of Cheonggukjang were 1,139.6 (CJJN-4) and 1,027.6 mg% (CJJN-5) for 72 hr at $40^{\circ}C$, and their producing rates were also higher at $40^{\circ}C$ fermentation than $45^{\circ}C$. Meanwhile, the contents of ammonia type nitrogen induced unpleasant flavor were lower in Cheonggukjang with CJJN-4 and 5 at $40^{\circ}C$ than CJJN-5 at $45^{\circ}C$. Therefore, Cheonggukjang fermented with CJJN-4 starter at $40^{\circ}C$ had the improved flavor, such as change of amino or ammonia type nitrogen production, and higher fibrinolytic activity.