• Steel and Composite Structures
• /
• v.5 no.2_3
• /
• pp.181-192
• /
• 2005

The effective length method for flexural (column) buckling has been used for many decades but its use is somewhat limited in various contemporary design codes to moderately slender structures with elastic critical load factor (${\lambda}_{cr}$) less than 3 to 5. In pace with the use of higher grade steel in recent years, the influence of buckling in axial buckling resistance of a column becomes more important and the over-simplified assumption of effective length factor can lead to an unsafe, an uneconomical or a both unsafe and uneconomical solution when some members are over-designed while key elements are under-designed. Effective length should not normally be taken as the distance between nodes multiplied by an arbitrary factor like 0.85, 1.0, 2.0 etc. Further, the classification of non-sway and sway-sensitive frames makes the conventional design procedure tedious to use and, more importantly, limited to simple regular frames. This paper describes the practical use of second-order analysis with section capacity check allowing for $P-{\delta}$ and $P-{\Delta}$ effects together with member and system imperfections. Most commercial software considers only the $P-{\Delta}$ effect, but not member and frame imperfections nor $P-{\delta}$ effect, and engineers must be very careful in their uses. A verification problem is also given for validation of software for this type of powerful second-order analysis and design. It is a trend for popular and advanced national design codes in using the second-order analysis as a norm for analysis and design of steel structures while linear analysis may only be used in very simple structures.

• Steel and Composite Structures
• /
• v.3 no.6
• /
• pp.403-420
• /
• 2003

In the paper one investigates the benefits deriving from the introduction of SMA provisions in a structure subject to dynamic excitation and vertical loads. At this purpose one considers a multi-degree-of-freedom (mdof) shear elastic-plastic frame and designs couples of super-elastic SMA tendons to be placed at critical locations of the structure. Particular attention is focused on the reduction of $P-{\Delta}$ effects.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.458-468
• /
• 2007

To tolerate environmentally adverse conditions such as cold, drought, and salinity, plants often synthesize and accumulate proline in cells as compatible osmolytes. ${\Delta}^1$-Pyrroline-5-carboxylate synthetase(P5CS) catalyzes the rate-limiting step of proline biosynthesis from glutamate. Two complete genes, MtP5CS1 and MtP5CS2, were isolated from the model legume Medicago truncatula by cDNA cloning and bacterial artificial chromosome library screening. Nucleotide sequence analysis showed that both genes consisted of 20 exons and 19 introns. Alignment of the predicted amino acid sequences revealed high similarities with P5CS proteins from other plant species. The two MtP5CS genes were expressed in response to high salt and low temperature treatments. Semi-quantitative reverse transcription-polymerase chain reaction showed that MtP5CS1 was expressed earlier than MtP5CS2, indicating differential regulation of the two genes. To evaluate the reverse genetic effects of nucleotide changes on MtP5CS function, a Targeting Induced Local Lesions in Genomes approach was taken. Three mutants each were isolated for MtP5CS1 and MtP5CS2, of which a P5CS2 nonsense mutant carrying a codon change from arginine to stop was expected to bring translation to premature termination. These provide a valuable genetic resource with which to determine the function of the P5CS genes in environmental stress responses of legume crops.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.42-48
• /
• 2008

This study was conducted to discuss the effects of hardener and extender contents on peak temperature, reaction enthalpy (${\Delta}H$), gelation time, viscosity change, and pH value in three types of UMF (urea-melamine- formaldehyde) resin with the help of perpHecT LogR meter, differential scanning calorimetry (DSC), and advanced rheometric expansion system (ARES), The results indicated that the pH value of Control A steeply decreased to 5,2 in the early stage but relatively remained constant thereafter as in Synthesis 1 and Synthesis 2, The peak temperature and time decreased as well, whereas ${\Delta}H$ and viscosity increased with the increase of hardener content. On the other hand, ${\Delta}H$ was not changed up to the extender content of 5% and then decreased with its further addition, And the pH value and peak temperature showed no change with the increase of extender content at the hardener content of 5% in three types of UMF resin, The effect of hardener content in this experiment, however, appeared more conspicuous in Control A than in the other two types of Synthesis 1 and Synthesis 2, These results might be caused by higher molecular weight with longer chains of methylene ($-CH_2-$) and methylene ($-CH_2-O-CH_2-$) ether bridges or much more branched chains in Control A.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.168-170
• /
• 1987

The reaction between 1-benzyl-3-carbamoyl-1,4-dihydropyridine (BNAH) 1 and various 1-arylpyridinium salts 2, and the reaction between 1-(4-methylphenyl)-1,4-dihydropyridine 4b and 1-aryl-3-carbamoylpyridinium (1-arylnicotinamide) salts 5 were carried out. The extents of reaction in equilibrium were estimated by nmr integration data. The equilibrium constants for the reactions, K, and the standard Gibbs free energy changes for the reduction of the pyridinium salts to the corresponding 1,4-dihydropyridines ${\Delta}G^{\circ}'$ were evaluated. The Hammett plot of log K for the reaction between 1 and 2, and ${\Delta}G^{\circ}'$ against ${\sigma}_p$ of the substituents in 1-aryl moiety shows linear correlation with the reaction constant ${\rho}$ of 9.4 (for log K vs ${\sigma}_p$) and -54.5 KJ/mole (for ${\Delta}G^{\circ}'$ vs ${\sigma}_p$). It was found that 1-aryl-1,4-dihydropyridines have much higher reducing power than the corresponding 1-aryl-1,4-dihydronicotinamides, and the power is affected greatly by the electron-withdrawing ability of the substituents in aryl group. The reactions were utilized for preparation of 1,4-dihydropyridines bearing highly electron-withdrawing groups such as 4-nitrophenyl and 2,4-dinitrophenyl, which could not be obtained by conventional dithionite reduction of the corresponding pyridinium salts due to the base-labile nature of the salts.

• Korean Journal of Acupuncture
• /
• v.29 no.3
• /
• pp.467-475
• /
• 2012

Objectives : The aim of this study was to examine the effects of Acupuncture at the GV20 and GV22 on normal human beings using power spectrum analysis. Methods : Electroencephalogram(EEG) power spectrum exhibits site-specific and state-related differences in various frequency bands. 8 channels Background Electroencephalogram (EEG) was carried out in 30 subjects(24 females and 4 males). Results : In ${\delta}$(theta) band, the power values decreased significantly at the 8-channel average value(p=0.03) and especially at T3(p=0.02), T4(p=0.001) and P3(p=0.03). In ${\alpha}$(alpha) band, the power values have no significant changes. In ${\beta}$(beta)band, the power values increased significantly at the 8-channel average value (p=0.02) and especially at T4(p=0.003), P3 (p= 0.03) and P4(0.02). In ${\beta}/{\delta}$(beta/theta) ratio, the value increased significantly at the 8-channel average value(p=0.002) and especially at Fp2(p=0.05), F4(p=0.007), T3(0.012), T4(0.005), P3 (0.007) and P4(0.03) Conclusions : Through this data, we conclude that acupuncture at the GV20 and GV22 on normal human beings could have possibility to awake the cerebral cortex by the functional mechanism.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.539-546
• /
• 1994

The critical micelle concentration(CMC) and the counterion binding $constant(\beta)$ at the CMC of cetyltrimethylammonium bromide(CTAB) in a series of aqueous solutions containing medium chain-length n-alcohols(Propanol, Butanol, Pentanol and Hexanol) have been determined from the concentration dependence of electrical conductance at serveral temperature from $17^{\circ}C\;to\;41^{\circ}C.$ Thermodynamic parameters $({\Delta}G^o_m,\;{\Delta}H^o_m,\;{\Delta}S^o_m,\;and\;{\Delta}C_p)$ associated with micelle formation of CTAB have been also estimated from the temperature dependence of CMC and $\beta$ values, and the significance of these parameters and their relation to the theory of micelle formation have been considered. The results show that an enthalpy-entropy compensation effect is usually observed for the micellization of CTAB. The effects of n-alcohols on the micellar properties (CMC and $\beta$) of CTAB solutions have been also investigated. The addition of n-alcohol to the CTAB solution in a small quantity decreases the CMC value and the counterion binding constant $(\beta)$ at the CMC, but the addition of n-alcohol in an excessive quantity increases the CMC values on the conterary. These results have been explained in terms of the effect of the micelle-solubilized alcohol on the micellar surface charge density.

• Journal of dental hygiene science
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2019

Background: Erosion is a gradual process that occurs fairly quickly, and the full extent of the erosive effects of acidic beverages is not yet clear. The present study aimed to determine the differences in the erosive potentials among four naturally acidic fruit nectars within the same range of titratable acidity and to determine the influence of the components of organic acids on tooth erosion. Methods: Diluted fruit nectars (mandarin 1:1.1, orange 1:1.7, lemon 1:15, grapefruit 1:20) with the same range of titratable acidity (7.9 ml) and their corresponding organic acids (0.05%, 0.1%, 0.3%, and 0.5% citric acid, malic acid, and a citric and malic acid mixture [pH 2.8], respectively) were used. Specimens were placed in conical tubes with 50 ml of each of the test solutions for 1 hour. A microhardness test and scanning electron microscopy were used to measure enamel erosion. Acid separation was carried out using high-performance liquid chromatography to analyze the composition of each test solution. Results: Similar decreases in the Vickers hardness number (VHN) were observed among the groups treated with the following diluted fruit nectars: diluted mandarin nectar ($75.9{\Delta}VHN$), diluted lemon nectar ($89.1{\Delta}VHN$), diluted grapefruit nectar ($91.7{\Delta}VHN$), and diluted orange nectar ($92.5{\Delta}VHN$). No statistically significant differences were found in the enamel surface hardness after erosion (p>0.05). Citric and malic acids were the major organic acids in the test fruits. The lemon and orange groups had the highest malic acid concentrations, and the mandarin group had the lowest malic acid concentration. Conclusion: The titratable acidity and the citric and malic acid contents of the fruits could be crucial factors responsible for enamel erosion. Therefore, fruit-based drinks should be regarded as potentially erosive.

• The Journal of Korean Medicine
• /
• v.20 no.2
• /
• pp.63-74
• /
• 1999

We demonstrated the moxibution on CV5(Serk-Moon) and CV3(Chung-Guk), as we have known contraceptive acupuncture point and pregnancy acupuncture point in oriental medcine, effected on concentration of progesteron and estrogen. As the reports, $3{\beta}-hydroxysteroid\;dehydrogenase/{\Delta}5-{\Delta}4$ isomerase $(3{\beta}-HSD)$ is an enzyme that has catalytic oxidation and isomerase reaction on steroidhormon synthase including progesteron and estrogen. So we observated the concentration and mass of $(3{\beta}-HSD)$ by immuno-chemicalstain, western blot and Enzyme-Linked Immunosorbent Assay in rat ovary. In results, we detected that the mass of $(3{\beta}-HSD)$ decreased significantly in moxibution treated group on CV5($p{\leq}0.05$) in rat ovary and proposed that the moxibution of CV5 make possible to contraception because of blocking estrogen synthesis by $(3{\beta}-HSD)$ decrease. But we didn't know moxibution effects exactly whether is biochemical reaction or thermal reaction on acupuncture point.

• The Journal of Korean Physical Therapy
• /
• v.23 no.2
• /
• pp.53-59
• /
• 2011

Purpose: This study was designed to compare the effects of transcutaneous electrical nerve stimulation (TENS) and silver spike point (SSP) therapy on current perception threshold (CPT) and mechanical pain threshold (MPT). Methods: Forty-five healthy adult male and female subjects were studied. Fourteen of them were males and twenty-one were females. Subject were randomly assigned to receive; (1) TENS (80/120 Hz alternating frequency), (2) SSP (3 Hz), or (3) no treatment (control group). Electric stimulation was applied over LI4 and LI11 on acupuncture points of the left forearm for 30 minutes. CPT and MPT were recorded before and after electrical stimulation. The data were analyzed using linear mixed models, with group treated as a between subject factor and time a within-subject factor. Results: At 30 minutes after cessation of electrical stimulation the CPT of C fibers and A${\delta}$fibers was reduced in the TENS group that of C fibers was reduced in the SSP group (p<0.05). After cessation of electrical stimulation, the MPT of C fibers and A${\delta}$fibers increased in the TENS group, and that of A${\delta}$fibers increased in the SSP group (p<0.05). Conclusion: After TENS and SSP stimulation, MPT of C fibers and A${\delta}$fibers were selectively increased. In particular, the TENS group showed increases in both C and A${\delta}$fibers, while the SSP group showed increases only in A${\delta}$fibers.