• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.335-340
• /
• 2017

Composite resin becomes an essential material in pediatric dentistry. However, incremental filling of composite resin to minimize the polymerization shrinkage takes time. To reduce the polymerization shrinkage, clinicians and researchers have focused on bulk-filling materials. Bulk-base composite resin is newly introduced as bulk-filling composite resin. The purpose of this study was to evaluate microhardness profile of bulk-base composite resin according to the depth of cure. A high flow bulk-base material and a low flow bulk-base material were used for experimental group, and a conventional composite resin was used for control group. Each group consist of 20 specimens, $3.5{\times}3.5{\times}5.0mm$ mold was used to make specimen. Specimens were sectioned at the 2 mm and the 3 mm depth with milling machine. Microhardness profile was measured at the surface, 2 mm depth, 3 mm depth, and 4 mm depth. Microhardness of control group showed statistically significant difference (p < 0.05) according to the polymerization depth. In contrast, experimental group showed no statistically significant difference, except between 0 mm and 4 mm at HFB, 0 mm and 2 mm, 0 mm and 3 mm at MFB. At the surface and the 2 mm depth, the control group showed higher microhardness than the experimental groups (p < 0.05). However, at the 4 mm depth, the experimental groups showed significantly higher microhardness (p < 0.05). The results from this study, the bulk-base composite resin showed higher microhardness at the 4 mm and lower microhardness at the surface and the 2 mm depth. Therefore, if bulk-base resin overcomes the mechanical weakness, it could be considered using in pediatric dentistry.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.128-136
• /
• 1992

This study was undertakened to investigate the change of image characteristics on dental films according to the process of using time of processing solution in automatic processor. Base + fog density, film density and subject contrast were measured with the digital densitometer, the pH of developing and fixing solution were measured with Digital pH / ION Meter. The following results were obtained: 1. Base + fog density was increased with the process of using time of the processing solution and was over the maximum permissible base + fog density 0.25 from the 3rd day. 2. Film density was increased with the process of using time of the processing solution. 3. Subject contrast was decreased with the process of using time of the processing solution. 4. The pH of the developing solution was decreased with the process of using time, the pH of the fixing solution was increased.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.3
• /
• pp.198-203
• /
• 2003

In this study, we synthesized p-hexyloxybenzaldehyde(HBA) by using p-hydroxybenzaldehyde and n-hexylchloride. p-dodecylaniline(DDA) prepared by nitration and reduction of dodecylbenzene. The schiff base, p-dodecylbenzylidene-$p^\prime$-hexyloxyaniline (DBHA) was synthesized by reaction of HBA and DDA. The color of synthetic compound was pale-brown and the yield was 62%. All the synthetic compounds were identified by TLC, FT-IR and ${^{i}H}$-NMR.In this study, we synthesized p-hexyloxybenzaldehyde(HBA) by using p-hydroxybenzaldehyde and n-hexylchloride. p-dodecylaniline(DDA) prepared by nitration and reduction of dodecylbenzene. The schiff base, p-dodecylbenzylidene-p'-hexyloxyaniline(DBHA) was synthesized by reaction of HBA and DDA. The color of synthetic compound was pale-brown and the yield was 62%. All the synthetic compounds were identified by TLC, FT-IR and $^1H$-NMR.

• Journal of Korean Physical Therapy Science
• /
• v.1 no.1
• /
• pp.175-185
• /
• 1994

The purpose of this study was to evaluate and compare the biceps muscles activity at the different angle and direction of the base of support on sitting position in hemiplegic patients. The biceps muscles activity was measured at the $0^{\circ},\;10^{\circ}$ of posterior tilt, $10^{\circ}$ of anterior tilt, $10^{\circ}$ of affected side tilt and $10^{\circ}$ of sound side tilt of the base of support by EMG biofeedback (MYOMED 432. ENLAF NONIUS CO.) In this study, 24 out-patients were evaluated who were treated at Yonsei University Medical College Rhabilitation Hospital. This study was carried out from December 5. 1993 to March 30. 1994. In order to determine the statistical significance of result, the ANOVA, and t-test were applied at the 0.05 level of significance. The results were as follows : 1. The biceps muscles activity of the sound side was no significantly difference at the different angle and direction of the base of support on sitting position(p>0.05). 2. The biceps muscles activity of the affected side was significantly increased at the 100 of sound side tilt and $10^{\circ}$ of posterior tilt of the base of support on sitting position(p<0.05). 3. There was no significantly difference in the change of the biceps muscles activity of the affected side between the affected group and the intact group of propriocetive sense(p>0.05). 4. The change of the biceps muscles activity of the affected side was significantly higer in the group of G 2 spasticity compared to that of G 1, G 1+ spasticity(p<0.05). These results showed that the biceps muscles activity of affected side was significantly increased when the base of support was tilted toward the sounde side and posterior direction on sitting position. In order to prevent the increment of biceps muscle activity, the patients must avoid to sit toward sound side and posterior tilt.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.305-307
• /
• 2002

Spectroscopic titration of D 193N and D 193E mutants of pharaonis phoborhodopsin (ppR) were performed to evaluate the pK$_{a}$ of the Schiff base Asp 193 corresponds to Glu204 of bacteriorhodopsin (bR). The pK$_{a}$ of the Schiff base (SBH$^{+}$) of D193N was 10.1~10.0 (at XH$^{+}$) and 11.4~11.6 (at X) depending on the protonation state of a certain residue (designated by X) and independent on CI$^{[-10]}$ , while those of the wild-type and D193E were> 12. pK$_{a}$ of XH$^{+}$ were; 11.8~11.2 at the state of SB, 10.5 at SBH$^{+}$ state in the presence of CI$^{[-10]}$ , and 9.6 at SBH$^{+}$ without CI$^{[-10]}$ These imply the presence of a long-range interaction in the extracellular channel.r channel.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.75-87
• /
• 2001

Three different kinds of substrate used in this study : bare Cu substrate, Ni-P/Cu substrate with a Ni-P layer thickness of $5\mu\textrm{m},$ and Au/Ni-P/Cu substrate with the Ni-P and Au layers of $0.15\mu\textrm{m}$ and $5\mu\textrm{m}$ thickness respectively. The wettability of various Sn-base solders was affected by the substrate metal finish used, i.e., nickel, gold and copper. On the Au/Ni-F/Cu substrate, Sn-base solders wet better than any of the other substrate metal finishes tested. The interfacial reaction between various substrate and Sn-base solder was investigated at $70^{\circ}C,$ $100^{\circ}C,$ $120^{\circ}C,$ $150^{\circ}C,$ $170^{\circ}C$ and $200^{\circ}C$ for reaction times ranging from 0 day to 60 day. Intermetallic phases was formed along a Sn-base solder/ various substrate interface during solid-state aging. The apparent activation energy for growth of Sn-Ag/Cu, Sn-Ag-Bi/Cu, and Sn-Bi/Cu couples were 65.4, 88.6, and 127.9 Kj/mol, respectively. After isothermal aging, the fracture surface shoved various characteristics depending on aging temperature and time, and the types of BGA pad.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.33-37
• /
• 2003

The new textured surface epitaxial base(TSEB) cell as a high efficiency Si solar cell was fabricated and its eletro-optical characteristics were investigated. The fabricated device showed the open circuit voltage of 0.62 V, the short circuit current of 40 mA, the fill factor of 0.7, and the efficiency of 16% under the incident light of AM-1 100 mW/$cm^2$. The TSEB cell proposed in this paper has the structural superiority in the fabrication of high efficiency solar cell due to the carrier drift transport in the optical absorption region and the formation of back surface field by $P^-/P^+$ epitaxial base, and the low emitter series resistance by insertion of $n^+$ buried contact.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1995.06b
• /
• pp.1-19
• /
• 1995

The plasmid pJEL 101 contains a highly repetitive element from the genome of Xanthomonas oryae pv. oryzae that has properties of an insertional element. The insertional nature of the element, hereto referred to as IS203, was confirmed by molecular analyses of the element and three related elements that were isolated from X. oryzae. The related sequences were isolated on the basis of transposition to the transposon-trapping vector pL3SAC and hybridization with pJEL101. The trapped elements (IS203a, IS203b, and IS203c) were each composed of 1,055 base pairs with 25 base terminal inverted repeats. The elements caused a three base pair target site duplication at the site of insertion in the sacRB gene. The sequence of pJEL 101 has 96% base pair identity with IS203a and 99% identity with IS203a and IS203c but lacks three nucleotides of the consensus left terminal repeat. IS203b has the same DNA sequences as IS203c but is inserted ito the sacRB gene in the opposite orientation. The longest open reading frame of IS203a could code for a protein of 318 amino acids and molecular weight of 37, 151. A search of the Genbank database revealed that IS203 has 51% identity with 909 nucleotides of IS4551 from Escherichia coli. The predicted protein of ORF1 has 40% and 30% amino acid identity to the ORF1 of Tn4551 and the transposase of IS30, respectively.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.529-541
• /
• 1993

The purpose of this study was to investigate not only the variability in the timing and amount of the maximum pubertal spurt in cranial base and mandible, but also its interrelationship with the timing of peak height velocity. This study was carried out by analysing biannual serial lateral cephalometric radiographs of twenty-six males and twenty-one females who were taken from 8.5years to 16.5years old of mean age, according to the established land-marks and linear measurements. The results of this study were summarized as follows. 1. Prevalance of the maximum growth spurt more than 80 percentage was occurred in all measurements of cranial base and mandible, except posterior cranial base length in the female. 2. In all measurements of cranial base and mandible, the maximum spurt was occurred earlier in the female than the male while it was greater in male in all measurements except ramal height. 3. In body height measurement, the peak height velocity was occurred 2 years earlier for the female(11.0 years old) than the male(13.0 years old). 4. The timing of maximum spurt in anterior cranial base length and total mandibular length in both sexes and ramal height in the female were coincided with PHV. The maximum spurt was occurred in both sexes in all measurements 2 years before or after PHV, except mandibular body length and posterior cranial base length the in female. 5. In all ages, there was significant correlation between the total mandibular length and ramal height, and was also correlation between total cranial base length and anterior cranial base length(P<0.05). However, there was no significant correlation between the ramal height and mandibular body length. In addition, there was also no any correlation between the anterior cranial base length and posterior cranial base length in all ages(P>0.05).

• Korean Journal of Anesthesiology
• /
• v.71 no.6
• /
• pp.459-466
• /
• 2018

Background: To compare the effects of intraoperative infusions of balanced electrolyte solution (BES)-based hydroxyethyl starch (HES) and saline-based albumin on metabolic acidosis and acid/base changes during major abdominal surgery conducted using Stewart's approach. Methods: Forty patients, aged 20-65 years, undergoing major abdominal surgery, were randomly assigned to the HES group (n = 20; received 500 ml of BES-based 6% HES 130/0.4) or the albumin group (n = 20; received 500 ml of normal saline-based 5% albumin). Acid-base parameters were measured and calculated using results obtained from arterial blood samples taken after anesthesia induction (T1), 2 hours after surgery commencement (T2), immediately after surgery (T3), and 1 hour after arriving at a postanesthetic care unit (T4). Results: Arterial pH in the HES group was significantly higher than that in the albumin group at T3 ($7.40{\pm}0.04$ vs. $7.38{\pm}0.04$, P = 0.043), and pH values exhibited significant intergroup difference over time (P = 0.002). Arterial pH was significantly lower at T3 and T4 in the HES group and at T2, T3, and T4 in the albumin group than at T1. Apparent strong ion difference (SIDa) was significantly lower at T2, T3, and T4 than at T1 in both groups. Total plasma weak nonvolatile acid ($A_{TOT}$) was significantly lower in the HES group than in the albumin group at T2, T3 and T4 and exhibited a significant intergroup difference over time (P < 0.001). Conclusions: BES-based 6% HES infusion was associated with lower arterial pH values at the end of surgery than saline-based 5% albumin infusion, but neither colloid caused clinically significant metabolic acidosis (defined as an arterial pH < 7.35).