• 신재생에너지
• /
• 제2권3호
• /
• pp.31-36
• /
• 2006

Superstrate pin amorphous silicon thin-film(a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides(TCO) in order to see the effect of TCO/p-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage VOC than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer(${\mu}c-Si:H$) between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{OC}$ of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{OC}$ of 994mV while keeping fill factor(72.7%) and short circuit current density $J_{SC}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{OC}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• 자원환경지질
• /
• 제21권1호
• /
• pp.97-106
• /
• 1988

The purpose of this study is to collect basic data which are prerequisite for quantitative analysis of coal logging data. The study involves laboratory measurements of physical properties such as seismic velocities (P,S-waves), resitivity and density of domestic and imported foreign coals. The relationships between these properties were analyzed by using cross-plots. Correlation between the physical properties of coal and the results of chemical analysis (calorie, fixed carbon, ash, moisture, volatile matter and sulfur contents) was also studied to obtain ideas about coal quality analysis using logging data. Summarized results are as follows: 1. $V_P$ is exponentialy related to $V_S$. And the average value of $V_P$ is about l.8 times as large as $V_S$. 2. Since coal has very low density compared with surrounding sedimentary rocks, density logging is appeared to be the best method for identifying coal seams and evaluating their qualities. 3. For the case of domestic coals, the ash contents and calorie show a perfect inverse relationship. Since the density increases as increase of ash content with a well-defined functional form, the ash content of domestic coals can be estimated by density measurements. 4. Because of low ash content, low density and high resistivity, foreign coals and domestic lignites are easily distinguished from domestic coals.

• The Plant Pathology Journal
• /
• 제29권3호
• /
• pp.344-349
• /
• 2013

Intraspecific variation in morphometry of pine wood nematodes Bursaphelenchus xylophilus and B. mucronatus in relation to geographical locations in South Korea was investigated using morphometric characters (body length, a, b and c ratio, stylet length, and spicule length for a male nematode and V (%) value for a female nematode). B. xylophilus was isolated from Pinus thunbergii in Jinju (1998), Ulsan (2000), Yangsan (2000), Mokpo (2001) and Jeju (2004), and from P. densiflora in Gumi (2001). B. mucronatus was isolated from P. thunbergii in Jinju (1991) and from P. densiflora in Milyang (2001). The body length of male and female B. xylophilus had the highest coefficient of variability and showed significant differences among geographical locations. The V (%) value for female B. xylophilus showed the lowest coefficient of variability, changing little with geographical area and host plant. All morphometric characters in B. mucronatus except for stylet length and female body length showed no significant differences between locations or hosts, suggesting they may not be affected by geographical area or host plant.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1786-1791
• /
• 2016

The damage has occurred inside the semiconductor pattern When using conventional wet station for semiconductor. It was used for electrolytic ion water generator in order to prevent damage to the semiconductor pattern. It was designed and developed a flow path electrode and the mesh electrode to check the efficiency of the electrode. And It confirmed the expected results through the simulation of the flow path. and ORP were measured in accordance with the current and voltage of mesh electrode and flow paht electrodes. Flow path electrode 22A is 3V, up to pH 9.8, the value of ORP-558mV was measured and the mesh electrode was measured up to pH 9.8, ORP -350mV.

• 전기의세계
• /
• 제30권10호
• /
• pp.645-654
• /
• 1981

A technique has been proposed for fabricating a submicron channel vertical V-groove JFET using standard photolithography. A finite element numerical simulation of the V-groove JFET operation was performed using a FORTRAN progrma run on a Cyber-174 computer. The numerical simulation predicts pentode like common source output characteristics for the p$^{+}$n Vertical V-groove JFET with maximum transconductance representing approximately 6 precent of the zero bias drain conductance value and markedly high drain conductance at large drain voltages. An increase in the acceptor concentration of the V-groove JFET gate was observed to cause a significant increase in the transconductance of the device. Therefore, as above mentioned, this paper is study on the analysis of a Vertical V-groove Junction Field Effect Transistor with Finite Element Method.d.

• Journal of Animal Science and Technology
• /
• 제52권2호
• /
• pp.117-124
• /
• 2010

본 연구는 균상재배 느타리버섯부산물(SMS)의 반추동물 조사료원으로서의 가치를 평가하기 위하여 in situ 반추위 소실율 및 면양을 이용한 in vivo 영양소 소화율, 체내 질소이용성 및 섭취행동 패턴을 평가하였다. SMS에 당밀 5% (w/w, 건물기준), 유산균(Lactobacillus plantarum) 0.5% (v/w) 그리고 효모 (Saccharomyces cerevisiae) 0.5% (v/w)를 첨가하여 30일간 혐기발효 시킨 후 반추위캐뉼라가 장착된 평균체중 620 kg Holstein 육우 2두를 이용하여 in situ 소실율을 평가하였다. 면양대사실험은 평균체중 48kg의 숫 면양 6두 이용하여 $3{\times}3$ 라틴방각법으로 하였다. 대조구는 볏짚 100%를, 처리구는 볏짚의 25%와 50%를 생균발효 SMS로 각각 대체 급여하였다. 균상재배 버섯부산물의 반추위 in situ DM 및 NDF 이용성은 생균발효처리에 의해 개선되었다(P<0.001). 생균발효 SMS를 볏짚의 25% 및 50% 대체하여 면양에게 급여하였을 때, 단백질과 섬유소(NDF, ADF, CF) 소화율은 감소하였으나 (P<0.05), 조회분 소화율은 증가하였으며(P<0.001), 면양체내 단백질 축척량은 차이가 없었다(P>0.05). 볏짚을 생균발효 SMS로 대체 급여함에 따라 면양의 반추시간은 평균 28% 감소하였다(P<0.05). 생균발효 SMS는 볏짚의 76% 수준의 에너지가를 보였다. 결과적으로, 균상재배 느타리버섯부산물은 유지목적의 반추동물 조사료원으로서 보다 적합한 것으로 사료되었다.

• 한국조리학회지
• /
• 제14권2호
• /
• pp.30-45
• /
• 2008

The objective of this study is to examine how the factors influence each other by determining the appropriate measurement standard in fast food restaurants based on the evaluation of attributes, perceived pricing, value, satisfaction and intention of revisit, and present an effective marketing strategy for fast food restaurants based on the analytical results by patrons and market segmentations. The study surveyed 195 subjects and processed the result using SPSS for Win. V. 12.0. For statistical analysis, Frequency, Factor Analysis, Reliability Analysis, and Regression Analysis were put into operation. As a result of the Factor Analysis of the evaluation of attributes, 3 factors have been extracted. The results showed that restaurant attribution evaluation had a positive effect on the perceived value($R^2adj=0.357$, p=0.000), satisfaction($R^2adj=0.346$, p=0.000) and intent of revisiting($R^2adj=0.389$, p=0.000); perceived pricing had a positive affect on the perceived value($R^2adj=0.464$, p=0.000), satisfaction($R^2adj=0.113$, p=0.000) and intention of revisit($R^2adj=0.276$, p=0.000); perceived value had a positive affect on satis-faction($R^2adj=0.327$, p=0.000) and intention of revisit($R^2adj=0.515$, p=0.000); and satisfaction had a positive affect on intention of revisit($R^2adj=0.442$, p=0.000).

• 한국인터넷방송통신학회논문지
• /
• 제15권6호
• /
• pp.231-238
• /
• 2015

본 연구는 RF 마그네트론 스퍼터링을 이용하여 ITO glass 위에 N-Type과 P-Type 박막을 증착하여 증착조건에 따른 면저항 특성을 확인하였다. N-Type의 I-V특성은 RF Power가 150 W 일 때 전류의 값이 가장 높은 것으로 나타났고, 15분을 증착하였을 때 기울기가 일정하게 나타나면서 Ohmic contact이 잘 이루어지는 것을 확인 할 수 있었다. 기판온도와 RF Power 및 증착시간이 증가함에 따라 면저항이 증가하는 것으로 나타났고, 면저항이 작은 값일수록 I-V 특성이 잘 나타났다. P-Type 에서도 N-Type과 비슷한 양상을 보이는데, RF Power가 150 W일때 전류가 가장 높은 것으로 나타났고, 20분을 증착하였을 때 Ohmic contact이 잘 이루어지는 것을 확인 할 수 있었다. 면 저항 또한 N-Type과 비슷하게 RF Power와 증착시간이 증가함에 따라 면저항이 증가하는 것을 확인 할 수 있었다.

• 한국식품영양과학회지
• /
• 제7권2호
• /
• pp.35-42
• /
• 1978

General components of comfrey collected during the period of July-September 1978 in Pusan area were investigated with a view to determine its possible value as a foodstuff by means of titrimetry, chromometric analysis and fluorometric analysis. As a result, the following data were obtained. 1) The contents of moisture, crude lipid, crude protein and carbohydrates of the comfrey were similar to those of other green vegetables such as spinach, crowndaisy, lettuce, leek and mallow. 2) The inorganic Ca, P and Fe of the comfrey were fairly greater in contents than those of other green vegetables. Compared with spinach, for instance, there were 4 times as much Ca and about 2 times as much Fe in it, respectively. 3) The contents of vitamins of the comfrey were also found in an amount much greater than those of other green vegetables. V-A of the comfrey, for instance, were 6 times greater in content than that of lettuce, and about 2 times greater than that of crowndaisy, leek and mallow, respectively. It also showed a greater content of V-A than even that of spinach, known as a vegetable most rich in V-A. V-B of the comfrey showed a little lower level of content than that of spinach but showed about the same level of content as that of leek and lettuce. V-B of the comfrey was 6 to 8 times greater in content than that of lettuce and leek. The content of niacin of the comfrey was also found much greater than those of other foodttuffs. V-C of the comfrey compared 3.5 times greater with that of lettuce, 2 times greater with that of mallow, and generally a higher level with those of other green vegetables. The above findings seem to firmly establish the food scientific value of the comfrey. Furthermore, the vegetable is very prolific and grows easily. If the general public is made aware of these facts, the vegetable is thought to contribute not a little to their dietary life as a nutritious foodstuff.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.171-177
• /
• 2021

This paper is concerned with the surface hardness measurement of NiP-coated AA7050 using different loads from 10 to 100 g. The surface hardness was observed to increase from 180 to 600 H_v with increasing NiP layer thickness, depending on the load applied for indentation. When NiP coating thickness is thinner than 2 ㎛, the surface hardness of NiP-coated AA7050 was mainly determined by AA7050 substrate, while it was significantly increased by NiP coating layer when NiP coating thickness is thicker than 2 ㎛. Hardness of AA7050 substrate itself was not dependent on the applied load but the hardness of NiP-coated AA7050 was largely influenced by the load applied for indentation. The largest difference of hardness between 10 g and 100g of applied loads, was obtained at the NiP thickness of about 8 ㎛ above which the measured hardness at 10 g reached a maximum value of about 600 H_v. It was also observed that indentation-induced plastic deformation next to the indented zone occurs when NiP layer is 5.64 times thicker than the depth of impression formed by indentation.