• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.4
• /
• pp.1-5
• /
• 2000

Properties of AC applied hot pressed ($Pb_{1-x}Sn_{x}$) Te thermoelectrics were investigated. Mechanical alloying process used to produce alloyed powder to reduce the inhomogeneity and to avoid vaporization of constituents. It showed an increase in the mechanical alloying time with increasing of Sn contents in ($Pb_{1-x}Sn_{x}$)Te. ($Pb_{1-x}Sn_{x}$)Te were sintered at 873 to 923K for 1-4 minutes, under 150 kgf/$\textrm{cm}^2$ by AC applied hot pressng method. The short sintering time of AC applied hot pressing process could reduce the vaporization of Te. The density of ($Pb_{1-x}Sn_{x}$) Te was more dependent on the sintering temperature than the sintering time. The p-n transition was observed at x=0.1 but only p type conduction behavior was observed at more than 20 mol% of Sn compositions. The maximum value of Seebeck coefficient is 250 $\mu$V/K for x=0.2 at 500K. As the amount of Sn increases, the peak value of Seebeck coefficient drops and shifts to higher temperature and the peak value of electrical conductivity decreased with increasing temperature.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.4
• /
• pp.47-55
• /
• 2007

Using the results of the Piezocone Penetration Test (PCPT) which were executed at the Yangsan-Mulgum site, the applicability of the interpretation methods for estimating the coefficient of consolidation ($C_v$) of soft clay was evaluated. At the same time, laboratory soil tests using the total of 172 undisturbed soft clay samples from the 44 regions of the Yangsan-Mulgum site were performed to study the differency in the coefficient of consolidation ($C_v$) compared to the results of PCPT. The calculated constrained modulus ($M_{\varepsilon}$) and coefficient of consolidation ($C_v$) using the results of consolidation laboratory tests which are based upon the consolidation theory of Terzaghi were compared with the predicted constrained modulus ($M_p$) and coefficient of consolidation ($C_{v-{M_p}}$) from the PCPT. The relationship between the predicted constrained modulus ($M_p$) and the calculated constrained modulus($M_c$) were showed good correlation. The $M_p$ by the Jones & Rust method were showed mostly similar to the calculated constrained modulus ($M_c$). The relationship between the coefficient of consolidation ($C_v$) obtained from the consolidation tests and the calculated coefficient of consolidation ($C_{v-{M_p}}$) were showed a linear relationship. The results of the calculated coefficient of consolidation ($C_{v-{M_p}}$) were about 54% of the value of the coefficient of consolidation ($C_v$) obtained from the consolidation tests.

• Journal of ILASS-Korea
• /
• v.19 no.4
• /
• pp.211-215
• /
• 2014

The main purpose of this study is to provide basic information of droplet soot generation of decane fuel. To achieve this, this paper presents the experimental results on the decane droplet combustion conducted under various ambient pressure($P_{amb}$), and oxygen concentration($O_2$) conditions. At the same time, the experimental study was conducted in terms of soot volume fraction($f_v$) and its maximum value. Also, visualization of single fuel droplet was conducted by high resolution CCD camera and ambient pressure($P_{amb}$) and oxygen concentration($O_2$) was changed by control system. It was revealed that higher ambient pressure($P_{amb}$), and oxygen concentration($O_2$) enhanced the soot generation and improved the maximum soot volume fraction( $f_v$).

• The Korean Journal of Applied Statistics
• /
• v.3 no.1
• /
• pp.89-103
• /
• 1990

An analysis of mean procedure is presented for testing the significance of two factor interactions for unbalanced case. When at least one factor if at only two levels, the technique is the same as that of Ott(1967) and Nelson(1988) except that we have used the critical value by using the Sidak's multiplicative inequality. The technique can be extended to the case in which both factors more than two levels. Tables of critical values g($\alpha ; (p, q) ; v$) are given for $\alpha$=0.05 and 0.01 ; (p, q) combinations satisfying $3 \leq p \leq q \leq 5$ ; and various degrees of freedom v. We present and prove the formula of the variance of the interactions for the n-way model.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.26-31
• /
• 2015

The purpose of this paper is to measure the induced voltage of the downscaled and simulated overhead ground wire of a 22.9kV-Y distribution line. This study performed a test of the downscaled and simulated distribution line according to whether it is grounded or not and the value of the ground resistance. In order to verify the reliability of the data measured by the test, the data was analyzed using the Minitab 17 program. It was found that the induced voltage of the downscaled and simulated distribution line is influenced by the value of the ground resistance. It was also found that the ground resistance obtained at a certain point is closely related to whether electric poles are grounded or not. The analysis results of the measured test data with a statistical method showed that the Anderson Darling (AD) was analyzed to be the smallest as 0.188 when the ground resistance of the electric poles had been maintained at $10{\Omega}$. In addition, the P value analyzed to be 0.894 which is in the proximity of the theoretical value of 1 and verified the reliability of the test data. It could be seen that the data measured by the downscaled simulation test forms a linear graph. It is thought that if a distribution line is installed in the same manner as the downscaled, simulated distribution line, the mean induced voltage will be reduced and reliability will be increased.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.1-8
• /
• 1996

Recently, much attention has been paid to problems which is concerned with voltage instability phenomena and much works on these phenomena have been made. In this paper, by substituting d $P_{k}$ d $e_{k}$ ( $v^{\rarw}$= e +j f) for $P_{k}$ in conventional load flow, direct method for finging the limit of voltage stability is proposed. Here, by using the fact that taylor se- ries expansion in .DELTA. $P_{k}$ and .DELTA. $Q_{k}$ is terminated at the second-order terms, constraint equation (d $P_{k}$ d $e_{k}$ =0) and power flow equations are formulated with new variables .DSLTA. e and .DELTA.f, so partial differentiations for constraint equation are precisely calculated. The fact that iteratively calculated equations are reformulated with new variables .DELTA.e and .DELTA.f means that limit of voltage stability can be traced precisely through recalculation of jacobian matrix at e+.DELTA.e and f+.DELTA.f state. Then, during iterative process divergence may be avoid. Also, as elements of Hessian mat rix are constant, its computations are required only once during iterative process. Results of application of the proposed method to sample systems are presented. (author). 13 refs., 11 figs., 4 tab.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.446-446
• /
• 2011

One dimensional (1-D) structures of ZnO nanorods are promising elements for future optoelectronic devices. However there are still many obstacles in fabricating high-quality p-type ZnO up to now. In addition, it is limited to measure the degree of the doping concentration and carrier transport of the doped 1-D ZnO with conventional methods such as Hall measurement. Here we demonstrate the measurement of the electronic properties of p- and n-doped ZnO nanorods by the Kelvin probe force microscopy (KPFM). Vertically aligned ZnO nanorods with intrinsic n-doped, As-doped p-type, and p-n junction were grown by vapor phase epitaxy (VPE). Individual nanowires were then transferred onto Au films deposited on Si substrates. The morphology and surface potentials were measured simultaneously by the KPFM. The work function of the individual nanorods was estimated by comparing with that of gold film as a reference, and the doping concentration of each ZnO nanorods was deduced. Our KPFM results show that the average work function difference between the p-type and n-type regions of p-n junction ZnO nanorod is about ~85meV. This value is in good agreement with the difference in the work function between As-doped p- and n-type ZnO nanorods (96meV) measured with the same conditions. This value is smaller than the expected values estimated from the energy band diagram. However it is explained in terms of surface state and surface band bending.

• Journal of Environmental Science International
• /
• v.13 no.2
• /
• pp.149-159
• /
• 2004

In the removal of heavy metals from the mine deposit using electrokinetic processes, the effects of operation under both constant current and constant potential conditions were estimated. The results of soil pH distributions for DDW-20 V and DDW-100 mA cases after the electrokinetic remediation tests were observed. In the former case, soil pH was not much changed and kept to almost constant value just little higher than initial soil pH of 3.52, except near the cathode, which was about pH 5. While in the latter case, soil pHs of anode and the cathode regions were less than pH 3 and about 6, respectively. The electroosmotic flow to the cathode increased rapidly till 10 hrs and decreased steadily and then maintained to constant rate until the end of operation at constant current condition. Electric potential gradient was continuously increased to as much as 34.375 V/cm. At the steady state, values of the apparent electric conductivity for DDW-20 V and DDW-100 mA were around 40 ${\mu}\textrm{s}$/cm and 30 ${\mu}\textrm{s}$/cm, respectively. In the DDW-100mA test, Cu, Cd, and Zn except Pb showed the tendency of moving toward the cathode. While in the DDW-20 V case, it was observed that Cu, Zn, and Pb except Cd were not moved to any directions. The results of the tests demonstrated that the electrokinetic soil remediation process could be operated better under constant current condition than constant electric potential condition.

• Microbiology and Biotechnology Letters
• /
• v.18 no.6
• /
• pp.599-606
• /
• 1990

A chitinase-producing bacterium, Aeromonas salmonicida YA7-625, was isolated from domestic seashore muds. The preferable medium composition for the production of chitinase was as follows: colloidal chitin 1.26% (w/v), tryptone 2.95% (w/v), $MgSO_4-7H_20$ 0.15% (w/v) and $K_2HP0_4$, 0.15% (w/v) (pH 8.5). The highest enzyme production was observed after cultivation of 48 hours at 27OC. The chitinase of Aeromonas salmonicida YA7-625 was purified successively by ammonium sulfate precipitation, affinity adsorption, hydroxylapatite column chromatography and gel filtration. The optimal temperature and pH for the activity of purified chitinase were $50^{\circ}C$ and 7.0, respectively. The molecular weight of purified chitinase was ca. 200,000 daltons and apparent Km value of it was 1.276 mglml on colloidal chitin.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.367-375
• /
• 2003

The puree of Rubus coreanus was fermented using lactic acid bacteria and its biological activities were examined. Lactobacillus acidophilus KCCM 32820, L. casei KCCM 12452, Lactococcus lactis subsp. lactis KCCM 40104, and Streptococcus thermophilus KCCM 40430 were used as a single or mixed starter for the lactic acid fermentation, and their cultures at the late logarithmic growth phase were inoculated to final concentration of 2% (v/v). L. casei fermented the puree of Rubus coreanus best when used as a single starter, and the culture of L. casei and L. lactis with the inoculation ratio of one to one showed the highest fermentation activity when used as a mixed starter. However, the fermented broth of the puree of Rubus coreanus using L. acidophilus and S. thermophilus showed the best results in the sensory evaluation. The optimal lactic acid fermentation conditions were as follows; the concentration of oligosaccharide added was 1% (w/v), pH of puree and fermentation temperature were 4.0 and $37^{\circ}C$, respectively, and fermentation time was $72{\sim}96$ hours. Glucose and fructose were major free sugars, and the content of lactic acid was 698.2 mg/100 g in the fermented broth. The fermented broth of the puree of Rubus coreanus showed the electron donating ability and nitrite scavenging ability with the value of 69% and 38.3% at pH 1.2, respectively. SOD-like activity and inhibitory activity on xanthine oxidase were also found in the fermented broth with the value of 60.3% and 41.8%, respectively. When the antimicrobial activities of the fermented broth were examined, it showed the highest growth inhibitory activity against Escherichia coli O-157:H7, and also contained antimicrobial activities against Salmonella typhimurium, Bacillus cereus, and Staphylococcus aureus.