• New & Renewable Energy
• /
• v.2 no.3
• /
• pp.31-36
• /
• 2006

Superstrate pin amorphous silicon thin-film(a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides(TCO) in order to see the effect of TCO/p-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage VOC than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer(${\mu}c-Si:H$) between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{OC}$ of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{OC}$ of 994mV while keeping fill factor(72.7%) and short circuit current density $J_{SC}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{OC}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.97-106
• /
• 1988

The purpose of this study is to collect basic data which are prerequisite for quantitative analysis of coal logging data. The study involves laboratory measurements of physical properties such as seismic velocities (P,S-waves), resitivity and density of domestic and imported foreign coals. The relationships between these properties were analyzed by using cross-plots. Correlation between the physical properties of coal and the results of chemical analysis (calorie, fixed carbon, ash, moisture, volatile matter and sulfur contents) was also studied to obtain ideas about coal quality analysis using logging data. Summarized results are as follows: 1. $V_P$ is exponentialy related to $V_S$. And the average value of $V_P$ is about l.8 times as large as $V_S$. 2. Since coal has very low density compared with surrounding sedimentary rocks, density logging is appeared to be the best method for identifying coal seams and evaluating their qualities. 3. For the case of domestic coals, the ash contents and calorie show a perfect inverse relationship. Since the density increases as increase of ash content with a well-defined functional form, the ash content of domestic coals can be estimated by density measurements. 4. Because of low ash content, low density and high resistivity, foreign coals and domestic lignites are easily distinguished from domestic coals.

• The Plant Pathology Journal
• /
• v.29 no.3
• /
• pp.344-349
• /
• 2013

Intraspecific variation in morphometry of pine wood nematodes Bursaphelenchus xylophilus and B. mucronatus in relation to geographical locations in South Korea was investigated using morphometric characters (body length, a, b and c ratio, stylet length, and spicule length for a male nematode and V (%) value for a female nematode). B. xylophilus was isolated from Pinus thunbergii in Jinju (1998), Ulsan (2000), Yangsan (2000), Mokpo (2001) and Jeju (2004), and from P. densiflora in Gumi (2001). B. mucronatus was isolated from P. thunbergii in Jinju (1991) and from P. densiflora in Milyang (2001). The body length of male and female B. xylophilus had the highest coefficient of variability and showed significant differences among geographical locations. The V (%) value for female B. xylophilus showed the lowest coefficient of variability, changing little with geographical area and host plant. All morphometric characters in B. mucronatus except for stylet length and female body length showed no significant differences between locations or hosts, suggesting they may not be affected by geographical area or host plant.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1786-1791
• /
• 2016

The damage has occurred inside the semiconductor pattern When using conventional wet station for semiconductor. It was used for electrolytic ion water generator in order to prevent damage to the semiconductor pattern. It was designed and developed a flow path electrode and the mesh electrode to check the efficiency of the electrode. And It confirmed the expected results through the simulation of the flow path. and ORP were measured in accordance with the current and voltage of mesh electrode and flow paht electrodes. Flow path electrode 22A is 3V, up to pH 9.8, the value of ORP-558mV was measured and the mesh electrode was measured up to pH 9.8, ORP -350mV.

• 전기의세계
• /
• v.30 no.10
• /
• pp.645-654
• /
• 1981

A technique has been proposed for fabricating a submicron channel vertical V-groove JFET using standard photolithography. A finite element numerical simulation of the V-groove JFET operation was performed using a FORTRAN progrma run on a Cyber-174 computer. The numerical simulation predicts pentode like common source output characteristics for the p$^{+}$n Vertical V-groove JFET with maximum transconductance representing approximately 6 precent of the zero bias drain conductance value and markedly high drain conductance at large drain voltages. An increase in the acceptor concentration of the V-groove JFET gate was observed to cause a significant increase in the transconductance of the device. Therefore, as above mentioned, this paper is study on the analysis of a Vertical V-groove Junction Field Effect Transistor with Finite Element Method.d.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.117-124
• /
• 2010

An in situ ruminal disappearance trial and an in vivo sheep metabolism trial were conducted to evaluate the nutritional value of spent mushroom substrate (SMS, originated from Pleurotus osteratus bed-type cultivation). The raw SMS was ensiled (ESMS) for 30 days with 5% (w/w, DM basis) molasses, 0.5% (v/w) yeast (Saccharomyces cerevisiae) and 0.5% (v/w) lactic acid bacteria (Lactobacillus plantarum). Two ruminally cannulated Holsteins (average BW 620 kg) were used to evaluate in situ disappearance. Six sheeps (average BW 48 kg) were fed, in $3{\times}3$ Latin square design, rice straw alone (Control), 25% (ESMS-25) and 50% (ESMS-50) of rice straw were replaced with ensiled SMS. For an in situ trial, ruminal DM and neutral detergent fiber (NDF) disappearance of SMS were increased after ensiling (P<0.05). For a sheep trial, protein and fiber (NDF, acid detergent fiber, crude fiber) digestibilities were decreased (P<0.05), crude ash digestibility was increased (P<0.001), and nitrogen retention was not affected (P>0.05) as rice straw was replaced with ensiled SMS. Ruminating time was decreased by an average of 28% by feeding ensiled SMS (P<0.05). Ensiled SMS (Bed-type cultivation) had 76% of energy value of rice straw. Consequently, ensiled SMS (Bed-type cultivation, 100% cotton waste) could be used as a roughage source appropriate for maintenance type rations for ruminants.

• Culinary science and hospitality research
• /
• v.14 no.2
• /
• pp.30-45
• /
• 2008

The objective of this study is to examine how the factors influence each other by determining the appropriate measurement standard in fast food restaurants based on the evaluation of attributes, perceived pricing, value, satisfaction and intention of revisit, and present an effective marketing strategy for fast food restaurants based on the analytical results by patrons and market segmentations. The study surveyed 195 subjects and processed the result using SPSS for Win. V. 12.0. For statistical analysis, Frequency, Factor Analysis, Reliability Analysis, and Regression Analysis were put into operation. As a result of the Factor Analysis of the evaluation of attributes, 3 factors have been extracted. The results showed that restaurant attribution evaluation had a positive effect on the perceived value($R^2adj=0.357$, p=0.000), satisfaction($R^2adj=0.346$, p=0.000) and intent of revisiting($R^2adj=0.389$, p=0.000); perceived pricing had a positive affect on the perceived value($R^2adj=0.464$, p=0.000), satisfaction($R^2adj=0.113$, p=0.000) and intention of revisit($R^2adj=0.276$, p=0.000); perceived value had a positive affect on satis-faction($R^2adj=0.327$, p=0.000) and intention of revisit($R^2adj=0.515$, p=0.000); and satisfaction had a positive affect on intention of revisit($R^2adj=0.442$, p=0.000).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.231-238
• /
• 2015

In this paper, we have studied a sheet resistance property of N- and P-type thin films deposited on ITO glass by use of RF magnetron sputtering. The N-type samples which has the deposition condition of 150W RF power, shows the highest current value, and the samples deposited for 15 minutes shows a better Ohmic contact property. As the substrate temperature, RF power and deposition time are increased, the sheet resistance of the samples is increased, and the low sheet resistance sample shows a better I-V property. The P-type samples shows the highest current value by 150W RF power condition as similar as N-type samples. and the samples deposited for 20 minutes shows a better ohmic contact property. The sheet resistance of the both types samples is increased as increasing RF power and deposition time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.7 no.2
• /
• pp.35-42
• /
• 1978

General components of comfrey collected during the period of July-September 1978 in Pusan area were investigated with a view to determine its possible value as a foodstuff by means of titrimetry, chromometric analysis and fluorometric analysis. As a result, the following data were obtained. 1) The contents of moisture, crude lipid, crude protein and carbohydrates of the comfrey were similar to those of other green vegetables such as spinach, crowndaisy, lettuce, leek and mallow. 2) The inorganic Ca, P and Fe of the comfrey were fairly greater in contents than those of other green vegetables. Compared with spinach, for instance, there were 4 times as much Ca and about 2 times as much Fe in it, respectively. 3) The contents of vitamins of the comfrey were also found in an amount much greater than those of other green vegetables. V-A of the comfrey, for instance, were 6 times greater in content than that of lettuce, and about 2 times greater than that of crowndaisy, leek and mallow, respectively. It also showed a greater content of V-A than even that of spinach, known as a vegetable most rich in V-A. V-B of the comfrey showed a little lower level of content than that of spinach but showed about the same level of content as that of leek and lettuce. V-B of the comfrey was 6 to 8 times greater in content than that of lettuce and leek. The content of niacin of the comfrey was also found much greater than those of other foodttuffs. V-C of the comfrey compared 3.5 times greater with that of lettuce, 2 times greater with that of mallow, and generally a higher level with those of other green vegetables. The above findings seem to firmly establish the food scientific value of the comfrey. Furthermore, the vegetable is very prolific and grows easily. If the general public is made aware of these facts, the vegetable is thought to contribute not a little to their dietary life as a nutritious foodstuff.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.4
• /
• pp.171-177
• /
• 2021

This paper is concerned with the surface hardness measurement of NiP-coated AA7050 using different loads from 10 to 100 g. The surface hardness was observed to increase from 180 to 600 H_v with increasing NiP layer thickness, depending on the load applied for indentation. When NiP coating thickness is thinner than 2 ㎛, the surface hardness of NiP-coated AA7050 was mainly determined by AA7050 substrate, while it was significantly increased by NiP coating layer when NiP coating thickness is thicker than 2 ㎛. Hardness of AA7050 substrate itself was not dependent on the applied load but the hardness of NiP-coated AA7050 was largely influenced by the load applied for indentation. The largest difference of hardness between 10 g and 100g of applied loads, was obtained at the NiP thickness of about 8 ㎛ above which the measured hardness at 10 g reached a maximum value of about 600 H_v. It was also observed that indentation-induced plastic deformation next to the indented zone occurs when NiP layer is 5.64 times thicker than the depth of impression formed by indentation.