• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.721-721
• /
• 2006

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1287-1291
• /
• 2009

The genes of cyanide hydratase(CHT), a kind of nitrilases whichhydrolyze cyanide to formamide were extracted from N. crassa and A. nidulans, the two fungal strains. The recombinant forms of the CHT originated from N. crassa and A. nidulans were prepared with N-terminal hexahistidine purificationtags or no tags, and expressed in E. coli. The enzymes were purified using immobilized metal affinity chromatography. They were compared according to their pH activity profiles, and kinetic parameters. The N. crassa CHT has the wider pH range of activity above 50% and three-fold higher turnover rate (6.6 ${\times}$ $10^8$ $min^{-1}$) than the A. nidulans, meanwhile the CHT of A. nidulans has the higher $K_m$ value. Expression of CHT in both N. crassa and A. nidulans were induced by the presence of KCN, regardless of any presence of nitrogen sources. Max. 82% of KCN was degraded in 60 min for biological degradation tests.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.253-256
• /
• 2000

In this paper, we propose the lossless image compression algorithm using the integer wavelet transform. Recently, the S＋P transform is widely used and computed with only integer addition and bit-shift operations, but not proper to remove the correlation of smooth images. then we compare the Harr wavelet of the S＋P transform with various integer coefficient filter banks and apply 9/7 ICFB to the wavelet transform. In addition, we propose a entropy-coding method that exploits the multiresolution structure and the feedback of the prediction error, and can efficiently compress the transformed image for progressive transmission. Simulation results are compared to the compression ratio using the S+P transform with different types of images.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1992.05a
• /
• pp.25-25
• /
• 1992

1.형질전환 조건 설정: 페염균을 casein hydrolysate배지에서 배양하여 550nm에서의 흡광도가 0.1이 되었을 때 pH를 7.0으로 낮추고 형질전환 능력이 나타나도록 할 때에는 pH를 7.6으로 높여 줌으로써 형질전환이 원하는 시기에 발현되도록 함. 2.돌연변이원에 대한 감수성 측정: com- mutant는 야생형보다 돌연변이가 일어난 위치에 따라 UV에 대한 감수성의 차이가 나타났으나 EMS에 대해서는 야생형과 큰 차이가 얼었음. 3.온도민감성: 5시간동안 43$^{\circ}C$에서는 37$^{\circ}C$에서의 생장율의 5%만 증가되었으나 5$0^{\circ}C$에서는 전혀 성장하지 않음.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.61-68
• /
• 2005

In this paper, low conversion loss 94 GHz MIMIC resistive mixer was designed and fabricated. The $0.1{\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT, which is applicable to MIMIC's, was fabricated. The DC characteristics of MHEMT are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency(fT) is 189 GHz and the maximum oscillation frequency(fmax) is 334 GHz. A 94 GHz resistive mixer was fabricated using $0.1{\mu}m$ MHEMT MIMIC process. From the measurement, the conversion loss of the 94 GHz resistive mixer was 8.2 dB at an LO power of 10 dBm. P1 dB(1 dB compression point) of input and output were 9 dBm and 0 dBm, respectively. LO-RF isolations of resistive mixer was obtained 15.6 dB at 94.03 GHz. We obtained in this study a lower conversion loss compared to some other resistive mixers in W-band frequencies.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.219-225
• /
• 2006

This paper presents a method of object classification based on discrete wavelet transform (DWT) and fuzzy inference(FI). It concentrated not only on the design of fuzzy inference algorithm which is suitable for low speed uninhabited transportation such as, conveyor but also on the minimize the number of fuzzy rule. In the preprocess of feature extracting, feature parameters are extracted by using characteristics of the coefficients matrix of DWT. Such feature parameters as area, perimeter and a/p ratio are used obtained from DWT coefficients blocks. Secondly, fuzzy if - then rules that can be able to adapt the variety of surroundings are developed. In order to verify the performance of proposed scheme, In the middle of fuzzy inference, the Mamdani's and the Larsen 's implication operators are utilized. Experimental results showed that proposed scheme can be applied to the variety of surroundings.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.81-84
• /
• 1990

This paper presents a method of sub-optimal control for nonlinear systems via block pulse transformation. The adaptive optimal control scheme proposed by J.P. Matuszewski is introduced to minimize the performance index. The proposed method is simple and computationally advantageous. Viablity of the this method is established with simulation results for the van der Pole equation for comparision with other methods.

• Solar Energy
• /
• v.11 no.3
• /
• pp.74-83
• /
• 1991

In this study, the (p)ZnTe/(n)Si solar cell and (n)CdS-(p)ZnTe/(n)Si poly-junction thin film are fabricated by vaccum deposition method at the substrate temperature of $200{\pm}1^{\circ}C$ and then their electrical properties are investigated and compared each other. The test results from the (p)ZnTe/(n)Si solar cell the (n)CdS-(p)ZnTe/(n)Si poly-junction thin fiim under the irradiation of solar energy $100[mW/cm^2]$ are as follows; Short circuit current$[mA/cm^2]$ (p)ZnTe/(n)Si:28 (n)CdS-(p)ZnTe/(n)Si:6.5 Open circuit voltage[mV] (p)ZnTe/(n)Si:450 (n)CdS-(p)ZnTe/(n)Si:250 Fill factor (p)ZnTe/(n)Si:0.65 (n)CdS-(p)ZnTe/(n)Si:0.27 Efficiency[%] (p)ZnTe/(n)Si:8.19 (n)CdS-(p)ZnTe/(n)Si:2.3 The thin film characteristics can be improved by annealing. But the (p)ZnTe/(n)Si solar cell are deteriorated at temperatures above $470^{\circ}C$ for annealing time longer than 15[min] and the (n)CdS-(p)ZnTe/(n)Si thin film are deteriorated at temperature about $580^{\circ}C$ for longer than 15[min]. It is found that the sheet resistance decreases with the increase of annealing temperature.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.163-170
• /
• 1999

A programmable A/D converter for an embedded fiber-optic combustion pressure sensor has been designed with 8 N and P channel MOSFETs, respectively. A local field enhancement for reducing programming voltage during writing as well as erasing an EEPROM device is introduced. In order to observe linear programmability of the EEPROM device during programming mode, a cell is developed with a $1.2\;{\mu}m$ double poly CMOS fabrication process in MOSIS. It is observed that the high resolution, of say 10mVolt, is valid in the range 1.25volts to 2volts. The experimental result is used for simulating the programmable 8 bit A/D converter with Hspice. The A/D converter is demonstrated to consume low power, $37\;{\mu}W$ by utilizing a programming operation. In addition, the converter is attained at the conversion frequency of 333 MHz.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.12
• /
• pp.616-623
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the quality of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, acceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically performed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.