• YAKHAK HOEJI
• /
• v.34 no.4
• /
• pp.224-237
• /
• 1990

A single uniform population of specific, saturable, high affinity binding site of $[^3H]QNB$ guinuclidinyl benzilate(QNB) was identified in the rat cerebral microsomes. The Kd value(37.2 pM) for $[^3H]QNB$ calculated from the kinetically derived rate constants was in agreement with the Kd value(48.9 pM) determined by analysis of saturation isotherms at various receptor concentrations. Dimenhydrinate(DMH), histamine $H_1-blocker$, increased Kd value for $[^3H]QNB$ QNB without affecting the binding site concentrations and this effect resulted from the ability of DMH to slow $[^3H]QNB-receptor$ association. Pirenzepine inhibition curve of $[^3H]QNB$ binding was shallow(nH = 0.52) indicating the presence of two receptor subtypes with high ($M_1-site$) and low($M_2-site$) affinity for pirenzepine. Analysis of these inhibition curves yielded that 68% of the total receptor populations were of the $M_1-subtype$ and the remaining 32% of the $M_2-subtype$. Ki values for the $M_1-$ and $M_2-subtypes$ were 2.42 nM and 629.3 nM, respectively. Ki values for $H_1-blockers$ that inhibited $[^3H]QNB$ binding varied with a wide range ($0.02-2.5\;{\mu}M$). The Pseudo-Hill coefficients for inhibition of $[^3H]QNB$ binding by most of $H_1-blockers$ examined except for oxomemazine inhibition of $[^3H]QNB$ binding were close to one. The inhibition curve for oxomemazine in competition with $[^3H]QNB$ was shallow(nH = 0.74) indicating the presence of two receptor populations with different affinities for this drug. The proportion of high and low affinity was 33:67. The Ki values for oxomemazine were $0.045{\pm}0.016\;{\mu}M$ for high affinity and $1.145{\pm}0.232\;{\mu}M$ for low affinity sites. These data indicate that muscarinic receptor blocking potency of $H_1-blockers$ varies widely between different drugs and that most of $H_1-blockers$ examined are nonselective antagonist for the muscarinic receptor subtypes, whereas oxomemazine might be capable of distinguishing between subclasses of muscarinic receptor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.3
• /
• pp.379-392
• /
• 2005

Statement of problem. One of the common problems of dental implant prosthesis is the loosening of the screw that connects each component, and this problem is more common in single implant-supported prostheses with external connection, and in molars. Purpose. The purposes of this study were: (1) to compare the initial abutment screw detorque values of the six different implant-abutment interface designs, (2) to compare the detorque values of the six different implant-abutment interface designs after cyclic loading, (3) to compare the detorque values of regular and wide diameter implants and (4) to compare the initial detorque values with the detorque values after cyclic loading. Material and methods. Six different implant-abutment connection systems were used. The cement retained abutment and titanium screw of each system were assembled and tightened to 32Ncm with digital torque gauge. After 10 minutes, initial detorque values were measured. The custom titanium crown were cemented temporarily and a cyclic sine curve load(20 to 320N, 14Hz) was applied. The detorque values were measured after cyclic loading of one million times by loading machine. One-way ANOVA test, scheffe’s test and Mann-Whitney U test were used. Results. The results were as follows : 1. The initial detorque values of six different implant-abutment connections were not significantly different(p>0.05). 2. The detorque values after one million dynamic cyclic loading were significantly different (p<0.05). 3. The SS-II regular and wide implant both recorded the higher detorque values than other groups after cyclic loading(p<0.05). 4. Of the wide implants, the initial detorque values of Avana Self Tapping Implant, MIS and Tapered Screw Vent, and the detorque values of MIS implant after cyclic loading were higher than their regular counterparts(p<0.05). 5. After cyclic loading, SS-II regular and wide implants showed higher detorque values than before(p<0.05).

• Journal of Gastric Cancer
• /
• v.21 no.1
• /
• pp.49-62
• /
• 2021

Purpose: This study aimed to investigate the prognostic value of lymph node ratio (LNR) in patients with locally advanced gastric cancer who received neoadjuvant chemotherapy. Materials and Methods: We retrospectively enrolled gastric cancer patients treated with neoadjuvant chemotherapy and curative surgery at the First Affiliated Hospital of Zhejiang University from 2004 to 2015 as the study cohort. Patients with the same inclusion criteria treated in 2016-2017 were enrolled as the validation cohort. Kaplan-Meier curves were assessed using the log-rank test to analyze the differences in overall survival (OS). Multivariate survival analysis was performed using the Cox proportional hazards model. The areas under the receiver operating characteristic curve of ypN and LNR categories for predicting the actual 3-year OS were compared. Results: A total of 265 patients were included in the proposal cohort. The median number of retrieved lymph nodes (rLNs) was 32. The number of positive lymph nodes (pLNs) increased as rLN increased (P=0.037), but the LNR remained relatively constant (P=0.462). The LNR was categorized into 4 groups according to the prognosis: ypNr0, node-negative with rLN>25; ypNr1, node-negative with rLN≤25 or 00.3. In the validation cohort of 43 enrolled patients, there was a clear distinction in OS that significantly (P<0.001) varied depending on the LNR values and LNR was the only independent prognostic factor in multivariate analysis (P<0.001). Conclusions: LNR was an independent prognostic factor for survival of patients with gastric cancer after preoperative chemotherapy and might be an alternative predictor for ypN stage.

• Korean Journal of Materials Research
• /
• v.25 no.7
• /
• pp.322-329
• /
• 2015

The magnitude of wear should be at a minimum for numerous automobile and aeronautical components. In the current work, composites were prepared by varying the cenosphere content using the conventional stir casting method. A uniform distribution of particles was ensured with the help of scanning electron microscopy (SEM). Three major parameters were chosen from various factors that affect the wear. A wear test was conducted with a pin-on-disc apparatus; the controlling parameters were volume percentages of reinforcement of 5, 10, 15, and 20%, applied loads of 9.8, 29.42, and 49.03 N, and sliding speeds of 1.26, 2.51, and 3.77 m/s. The design of the experiments (DOE) was performed by varying the different influencing parameters using the full factorial method. An analysis of variance (ANOVA) was used to analyze the effects of the parameters on the wear rate. Using regression analysis, a response curve was obtained based on the experimental results. The parameters in the resulting curve were optimized using the Genetic Algorithm (GA). The GA results were compared with those of an alternate efficient algorithm called Neural Networks (NNs).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• Journal of Korean Society on Water Environment
• /
• v.29 no.5
• /
• pp.648-655
• /
• 2013

Nonpoint source pollution characteristics of recreation park was investigated. Runoff ratio of recreation park ranged 23-57%, which was lower than other urban area since impervious area was less than 37%. The average BOD, COD, TOC, SS, T-N, T-P, were 14.09, 32.86, 12.19, 121.51, 7.78 and 0.72 mg/L, respectively. First flush of recreation park was analyzed by normalized cumulative load - volume curve and mass first flush ratio(MFFn), MFF10 for BOD, COD, SS, T-P, T-N, TOC were 2.90, 1.59, 2.15, 2.74, 2.60, and 1.59, respectively. Observed data showed that 62% of pollutant could be removed by storaging 5 mm rainfall-runoff and even 3 mm depth could store up to 50% of pollutant in runoff.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.147-147
• /
• 2011

High crystalline nonpolar a-plane (11-20) nitride light emitting diodes (LEDs) have been fabricated on r-plane (1-102) sapphire substrates by metalorganic chemical-vapor deposition (MOCVD). The multi-quantum wells (MQWs) active region is consists of 4 periods the nonpolar a-plane InGaN/GaN(a-InGaN/GaN) on a high quality a-plane GaN (a-GaN) template grown by using the multibuffer layer technique. The full widths at half maximum (FWHMs) of x-ray rocking curve (XRC) obtained from phiscan of the specimen that was grown up to nonpolar a-plane GaN LED layers with double crystal x-ray diffraction. The FWHM values were decreased down to 477 arc sec for $0^{\circ}$ and 505 arc sec for $-90^{\circ}$, respectively. After fabricating a conventional lateral LED chip which size was $300{\times}600{\mu}m^2$, we measured the optical output power by on-wafer measurements. N-electrode was made with Cr/Au contact, and ITO on p-GaN was formed with Ohmic contact using Ni/Au followed by inductively coupled plasma etching for mesa isolation. The optical output power of 1.08 mW was obtained at drive current of 20 mA with the peak emission wavelength of 502 nm.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.53-63
• /
• 1996

In order In analyze the occlusion of TMD patient, 73 casts and post eroanterior cephalometric X-rays of patients showing TMD symptoms at first interview were measured and compared that of 30 non-patients . Horizental overjet, vertical overbite, openbite, crossbite, depth of curve of Spee, midline deviation, facial asymmetry, attrition, and TPI were measured and processed statistically The results could be summarized as follows, 1. TMD group showed the highest prevalence in twenties, teens, and before 9 years old group in order, and more prevalent in female than male. 2. There were no statistically significance between two groups of overjet and overbite measurements, but showed significance of 6 classification of anterior tooth relationship between two groups TMD groups. 3. n group had more anterior openbite than normal group but there were no statistically significance between two groups. 4. Anterior crossbite was more prevalent in normal group brit posterior crossbite was more prevalent in TMD group. 5. TMD group showed deeper curve of Spee and there were statistically significance between two groups. 6. TMD group had more attrition than normal group and there were statistically significance beween two groups. 7 TMD group showed more facial asymmetry than normal group. 8. TPI did not showed statistical significance beween two groups. According to the above results, TMD group showed severe and complex mode of malocclusion and this should be carefully regarded when treatment planning and during the treatment of malocclusion.

• Toxicological Research
• /
• v.6 no.1
• /
• pp.89-97
• /
• 1990

Neural regulation of phenylethanolamine N-meth-yltransferase (PNMT) was studied with reserpine as a neuronal agent in rat adrenal medulla. The enzyme activity assay and northern blot analysis were performed to determine whether the induction of PNMT activity after reserpine treatment was associated with elevation of mRNA coding for PNMT. The i.p. administration of reserpine (2.5 mg/kg) on alternate days fot 4 injections to rats brought about 30% increase of adrenal medullary PNMT activity and approximately 60% stimulation of the PNMT mRNA level in rat adrenal gland. A dose of 10 mg/kg of reserpine was chosen to perform optimum induction of PNMT activity in the rat adrenal gland based on the results of dose response curve of reserpine. Time course reserpine (10 mg/kg) effects on the rat adrenal medullary PNMT were as follows: 1. Peripheral PNMT activity reached maximum level after 7 days of drug treatment on alternate days. 2. Trans-synaptic stimulation by reserpine increased pretranslational activity of rat adrenal PNMT, but not translational activity. 3. Immunotitration of PNMT molecule after reserpine treatment indicated that reserpine produced an enzyme with greater antibody affinity than endogenous molecule in the rat adrenal gland.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.958-959
• /
• 2015

This paper proposes adaptive incremental conductance(A-IC) algorithm for maximum power point tracking(MPPT) control of photovoltaic. Conventional Perturbation & Observation(PO) and IC MPPT control algorithm generally uses fixed step size. A small fixed step size will cause the tracking speed to decrease and tracking accuracy of the MPP will decrease due to large fixed step size. Therefore, this paper proposes N-IC MPPT algorithm that adjust automatically step size according to operating conditions. To improve tracking speed and accuracy, when operating point is far from maximum power point(MPP), step size uses maximum value and when operating point is near from MPP, step size uses variable step size that adjust according to slope of P-V curve. The validity of MPPT algorithm proposed in this paper prove through compare with conventional IC MPPT algorithm.