• Tunnel and Underground Space
• /
• v.25 no.4
• /
• pp.341-358
• /
• 2015

This study analyzes the relationship between parameters of the discontinuity in Discrete Fracture Network model such as fracture intensity, fracture orientation, fracture size, fracture shape etc. In this paper, FracMan code was used to model and analyze 3D DFN. A sensitivity analysis was performed in order to analyze the relationship between linear fracture intensity measure ($P_{10}$) and parameters of the discontinuity in $100m{\times}100m{\times}100m$ model area. As a result the sensitivity analysis showed that key parameters affecting fracture intensity are fracture orientation (Trend / Plunge). Conversion factor($C_{13}$) for $P_{10}$, to calculate volumetric fracture intensity measure ($P_{32}$), is derived in case of vertical well and horizontal well when trend is $10^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$, $180^{\circ}$ (7cases) and plunge is $5^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$, $85^{\circ}$ (7cases). It is expected that this paper can be used effectively for modeling and understanding DFN model.

• Journal of Aquaculture
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2006

An experiment was conducted to investigate the effects of four water temperatures (10, 15, 20, and $25^{\circ}C$) in combination with three photoperiods (24L:0D, 12L: 12D, and OL:24D) on the oxygen consumption rate of juvenile dark-banded rockfish, Sebastes inermis (mean body weight $20.5{\pm}0.7g$). The oxygen consumption rates of S. inermis were measured in triplicate for 24 hours using a continuous flow-through respirometer. Different combinations of water temperatures and photoperiods resulted in significant differences in the mean oxygen consumption rate of S. inermis (P<0.001). The oxygen consumption increased with increasing water temperatures for all photoperiod treatments (P<0.01). Mean oxygen consumption rates at 10, 15,20 and $25^{\circ}C$ ranged $178.3\sim283.5,\;386.7\sim530.7,\;529.2\sim754.3$ and $590.0\sim785.5mg\;O_2kg^{-1}h^{-1}$, respectively. $Q_{10}$ values ranged $3.17\sim5.51$ between 10 and $15^{\circ}C,\;1.87\sim2.10$ between 15 and $20^{\circ}C$ and $1.08\siml.24$ between 20 and $25^{\circ}C$, respectively. Fish held in continuous darkness (OL:24D) used consistently less okygen than fish exposed to continuous light (P<0.05). The mean oxygen consumption offish in a 12L:12D photoperiod was higher than that offish in 24L:0D and 0L:24D photoperiods under all temperature treatments except $10^{\circ}C$. The oxygen consumption of fish exposed to the 12L:12D photoperiod was significantly higher during the light phase than during the dark phase under all temperature treatments except $10^{\circ}C\;(P<0.05)$. This study provides empirical data for estimating oxygen consumption of S. inermis under given condition. This result has application for culture management and bioenergetic model for growth of this species.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.124-138
• /
• 1998

Particles reinforced MMCs have many advantages over monolithic metals including a higher specific modulus, higher specific strength, better properties at elevated temperatures and better wear resistance. SiC$_p$/A16061 composites have good results in its mechanical properties. This work investigates SiC$_p$/A16061 composites in the microscopic view and compares the analytical results with the experimental ones. The discrepancy of the material properties between the reinforced particle, SiC$_p$, and the matrix material, A16061 appears to be so significant. Especially the coefficient of thermal expansion(CTE) of A16061 is 5 times larger than that of SiC$_p$. Thermal residual stress in MMCs is induced at high temperatures. The shape of particle is various but the theoretical model is not able to consider the nonuniform shape. Particle distribution is not homogeneous in experimental specimen. However, it is assumed to be homogeneous in simulation model. The shapes of particles are assumed to be not only perfect global but hexahedral shapes. The types of particle distribution are two - simple cubic array(SC array) and face-centered cubic array(FCC array).

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.29-44
• /
• 1988

Equilibrium relations between garnet and orthopyroxene have been investigated by reversal experiments in the range of 20-45Kb and $975-1400^{\circ}C$ in the $FeO-MgO-Al_2O_3-SiO_2$(FMAS) system. A mixture of PbO with about 55 mol per cent $PbF_2$ was used as a flux and proved very effective. The Fe-Mg exchange reaction seems to have little or no compositional dependence at these conditions. Combination of the experimental results with the garnet mixing model of Ganguly and Saxena(1984) yields the following geothermometric expression for the common natural assemblages that can be represented essentially within the system $FeO-MgO-CaO-MnO-Al_2O_3-SiO_2$. $$T^{\circ}C=(1971+11.91P(Kb)+1510(X_{Ca}+X_{Mn})^{Gt}/(lnK_D+0.96)-273$$.

• Journal of Power System Engineering
• /
• v.4 no.2
• /
• pp.71-76
• /
• 2000

It is well known that finite element analysis often has the inaccuracy when they are in conflict with test results. Model updating is concerned with the correction of analytical model by processing records of response from test results. This paper introduce a model updating technique using the frequency response function data. The measurement data is able to be used directly in the FRF sensitivity method because it is not necessary to identify. When a damping model is updated, it is necessary for the sensitivity matrix to be divided Into the complex part and real part. As an applying model, a cantilever and a rotor system are used. Specially the machined clearance($C_p$) of the journal bearing is updated.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.372-380
• /
• 2024

Purpose This study aimed to develop a rabbit iliac stenosis model and evaluate the effects of different mechanical injury techniques on the degree of arterial stenosis. Materials and Methods Eighteen rabbits were divided into three groups: cholesterol-fed with pullover balloon injury (group A; n = 6), cholesterol-fed with localized balloon dilatation (group B; n = 6), and chow-diet with pullover balloon injury (group C; n = 6). After baseline angiography, the left iliac arteries of all rabbits were injured with a 3 × 10 mm noncompliant balloon using either a wide pullover technique (groups A and C) or a localized balloon dilatation technique (group B). A nine-week follow-up angiography was performed, and the angiographic late lumen loss and percentage of stenosis were compared. Results Group A exhibited the most severe late lumen loss (A vs. B, 0.67 ± 0.13 vs. 0.04 ± 0.13 mm, p < 0.0001; A vs. C, 0.67 ± 0.13 vs. 0.26 ± 0.29 mm, p < 0.05; stenosis percentage 32.02% ± 6.54%). In contrast, group B showed a minimal percentage of stenosis (1.75% ± 6.55%). Conclusion Pullover-balloon injury can lead to significant iliac artery stenosis in rabbits with controlled hypercholesterolemia. This model may be useful for elucidating the pathogenesis of atherosclerosis and for evaluating the efficacy of novel therapeutic interventions.

• KCID journal
• /
• v.6 no.1
• /
• pp.20-30
• /
• 1999

화석연료의 고갈에 대비한 대체에너지 개발의 일환으로 미국의 에너지성과 TVA는 속성수인 Cottonwood를 재배하여 에너지화 하는 연구를 하고 있다. 미시시피주 Stoneville에 0.365ha 크기의 시험포 6개를 설치하고 Cottonwood와 Cotton을 재배하며 환경영향을 평가하기 위하여 유출량, 부유물질(TSS), 질산성 질소($NO_3-N$, 총인(T-P) 등의 수질인자를 모니터링하고 있다. 본 연구는 EPIC 모델이

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.581-589
• /
• 2004

This paper compares the fatigue behaviors of concretes subjected to flexural and split-tensional loadings, and proposes the fatigue reliability models based on experimental results and reliability analysis. The fatigue tests were performed for the specimens of $150 mm{\times}75 mm$ split tensional cylinders and $150 mm{\times}150 mm{\times}550 mm$ flexural beams under constant loadings at three levels (70, 80 and $90\%$) with 0.1 stress ratio, 20 Hz loading speed and sine wave. The reliability analysis on fatigue data was based on Weibull distribution of two-parameters. From fatigue test results, two criteria were proposed to reject the experimental fatigue data because of statistical variation of concrete fatigue data. Two parameters ($\alpha$and u) of Weibull distribution were obtained using graphical method, moment method and maximum likelihood method. The probability density function(P.D.F) and cumulative distribution function(C.D.F) of the Weibull distribution for fatigue life of pavement concrete were derived for various stress levels using parameters, $\alpha$ and u. The goodness-of-fit test by Kolmogorov-Smirnov test was acceptable at $5\%$ level of significance. Based on reliability analysis, a fatigue model for pavement concrete was proposed and compared from existing models.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.225-230
• /
• 2008

Diabetes mellitus is the fifth leading cause of death among Koreans. Control of hyperglycemia and dyslipidemia is strongly correlated with decrease in risks for cardiovascular diseases, the most common and fatal diabetic complication. The effects of chronic feeding of a mixture of Chinese herbs on blood lipid profile were measured in an animal model of type 2 diabetes mellitus, db/db mice (C57BL/Ks). The Chinese herb mixture was composed of Panax ginseng C. A. Meyer,Astragalus membranaceus, Glycyrrhiza uralensis, Lycium chinense, Morus, Pueraria thunbergiana, Prunella vulgaris var. lilacina, Acanthopanax sessiliflorus, Schizandra chinensis, Scutellaria baicalensis, Dioscorea batatas, Polygonatum doratumvar. pluriflorum, Paeonia lactiflora, and Rehmannia glutinosa in a ratio of 1 : 0.7 : 0.4 : 0.7 :0.4 : 0.7 : 1.1 : 0.9 : 0.4 : 0.4 : 0.7 :0.7 : 0.9 : 0.9. Methanol extract of the Chinese herb mixture was tested for the inhibitory activity against yeast ${\alpha}$-glucosidase in vitro. The Chinese herb mixture extract inhibited ${\alpha}$-glucosidase by 25.2% at the concentration of 0.5mg/mL. Four weekold male db/db mice (n = 14) were fed AIN-93G semipurified diet or diet containing 10% powder of the Chinese herb mixture for 6 weeks after 1 week of adaptation period. Body weight (39.5 ${\pm}$ 1.6 g) and food intake (4.3 ${\pm}$ 0.6 g/day) of the Chinese herb group were not significantly different from those of the control group (40.4 ${\pm}$ 2.6 g and 4.5 ${\pm}$ 0.6 g/day). Consumption of Chinese herb mixture significantly decreased plasma glucose level (442.5 ${\pm}$ 36.0mg/dL) compared with the control group (489.8 ${\pm}$ 34.6 mg/dL, p < 0.05). Plasma cholesterol level (159.2 ${\pm}$ 18.4 mg/dL) of the Chinese herb group was significantly lower than that of the control group (185.4 ${\pm}$ 13.7 mg/dL, p < 0.05). Blood glycated hemoglobin (6.3 ${\pm}$ 0.8%) and plasma triglyceride levels (99.4 ${\pm}$ 15.0mg/dL) of the Chinese herb group were not significantly different from those of the control group (6.7 ${\pm}$ 0.7% and 108.8 ${\pm}$ 11.0mg/dL). Thus, the Chinese herb mixture could be useful in the treatment of diabetes and cardiovascular complications of diabetes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.27-35
• /
• 2021

Purpose: The purpose of this study is to compare the accuracy of digital scans of implants according to different shapes of scanbodies, and to compare the accuracy of library merging according to different oral exposure height. Materials and methods: A master model with a single tooth edentulous site was prepared. For the first experiment, three types of intraoral scanbodies were prepared, divided into three groups, and the following experiments were conducted for each group: An internal hex implant was placed. The master model with the scanbody connected was scanned with a model scanner, and a master reference file (control group) was created. 10 files (experimental group) were created by performing 10 consecutive scans with an intraoral scanner. After superimposing the control and experimental groups, the following values were calculated: 1) Distance deviation of a designated point on the scanbody 2) Angle deviation of the major axis of the scanbody. For the second experiment, the scanbody scan data were prepared in 6 different heights. Library files were merged with each of the scan data. The distance and angular deviation were calculated using the 7 mm scan data as control group. Results: In the first experiment, there were no significant differences between A and B (P=.278), B and C (P=.568), and C and A (P=.711) in the distance deviations. There were no significant differences between A and B (P=.568), B and C (P=.546), and C and A (P=.112) in the angular deviations. Also, the scanbody showed significantly higher library merging accuracy in the groups with high oral exposure height (P<.5). Conclusion: There were no significant differences in scan accuracy according to the different shapes of scanbodies, and the accuracy of library merging increased according to exposure height of the scanbody in the oral cavity.