• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.131-137
• /
• 1996

To perform condition monitoring of P.C. Box girder bridge under ambient traffic, dynamic characteristics were identified using the results of load test an analysis. It was found that natural frequencies obtained from the measured acceleration data for the forced vibration part and free vibration part were nearly identical. Thus it can be concluded that dynamic parameters are properly determined under ambient traffic condition. Finite element model for analysis was calibrated using measured frequencies. Change of dynamic characteristics were predicted through analysis of the established finite element model with anticipated change.

• 유기물자원화
• /
• 제23권1호
• /
• pp.70-81
• /
• 2015

Helicase는 NTP 결합의 화학적 에너지를 이용하여 이중가닥의 DNA와 RNA를 단일가닥으로 분해하여 다양한 생체반응에 기여하는 단백질로 알려져 있으며, 이 중 DEAD-box의 단백질은 주로 RNA와 관련된 대부분의 생화학적 반응에 작용하는 ATP 의존성 helicase로 알려져 있다. 또한 이 단백질 부류에 속하는 DEAD-box3 (DDX3) gene은 척추동물뿐만 아니라 무척추동물에서의 유성 생식과 무성 생식에서 생식세포 발달 및 재생과정 중 줄기세포 분화에 중요한 역할을 하는 인자로 알려져 있다. 이에 본 연구는 강한 재생능력을 가진 것으로 알려져 있는 팔딱이 지렁이(Perionyx excavatus)에서 DDX3 gene을 동정하고 그 발현양상을 알아보고자 환대를 포함하는 성체 지렁이의 두부를 절단하여 total RNA를 추출하고, 이를 주형으로 RT-PCR을 수행하여 full length의 DDX3 gene인 Pe-DDX3를 검출하였다. Pe-DDX3는 607개 아미노산 서열로 이루어져 있으며, DEAD-box 단백질 그룹 내에서 특이적으로 보존되어 있는 9개의 motif가 존재하고 있다. 다른 분류군에 속하는 동물들과의 multiple alignment를 통해 서열 내에 보존되어 있는 아미노산 서열을 확인할 수 있었으며, 아미노산 차원에서의 계통수 분석을 통해 DDX3 (PL10) 하부그룹에 속하는 것을 알 수 있었으며, 또한, 같은 그룹에 속하는 동물 중 P. dumerilii의 PL10a, b 단백질과 가장 가까운 유연관계를 확인 할 수 있었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.71-74
• /
• 2007

Thin-walled multicell box girders subjected to an eccentric load can be produced the three global behaviors of flexure, torsion, and distortion. But it is very difficult to evaluate each influences of major behaviors numerically. If we can decompose an eccentric load P into flexural, torsional, and distortional forces, we can execute quantitative analysis each influences of major behaviors. Decomposition of Applied Load for Thin-walled Rectangular multi-cell box girders is researched by Park, Nam-Hoi(Development of a multicell Box Beam Element Including Distortional Degrees of Freedom, 2003). But researches about thin-walled trapezoidal multi-cell section is insufficient. So, this paper deals with decomposition process and independent analysis method of multi-cell box girders include trapezoidal section.

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.160-167
• /
• 2018

In this paper, a black box, which is provided the reliability and user safety of home battery energy storage system connected with solar energy generation, is developed. In the developed scheme, a status and diagnosis data of battery management system, power conditioning system, solar energy generation and grid is measured. This status and diagnosis data is stored and displayed in the developed black box. In addition, this status and diagnosis data is stored and displayed in a monitoring system and a smart phone of user. A performance evaluation of the developed black box is carried out using emulator of home battery energy storage system connected with solar energy generation. Consequently, the developed black box is proved its superiority of the reliability and user safety.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1545-1548
• /
• 1991

In this note, we consider a robust linear shift-invariant feedback compensator design for discrete-time multivariable systems which have both matched and mismatched uncertainties. In order to attack the problem of designing robust compensators guaranteeing uniform ultimate boundedness of every closed-loop system response within a neighborhood of the zero state based solely on the knowledge of the upper norm-bounds of uncertainties, we use an approach which is effective on studying augmented feedback control systems with both mismatched and matched uncertainties. We draw some robust stability conditions using the approach and give an example.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1764-1769
• /
• 1991

Recently, dexterous mechanical hands have become of interest in the field of robotics. In this paper, a new symbolic C-Y notation is proposed for the kinematic modeling, and we solve the kinematics of a simplified model of POSTECH Hand 1, which is a 5 fingered, 20 degrees of freedom anthropomorphic hand. POSTECH Hand I is designed to have distinctive kinematic structure and the kinematic analysis of the hand is carried out using C-Y notation. To prove the feasibility of C-Y notation, D-H notation is also applied to the POSTECH Hand 1. In the inverse kinematic analysis, we neglect the fingertip geometry and assume the point contact with 3 degrees of freedom constraints. The configurations which optimize manipulability index[2] was obtained based on the simulation experiments on the SUN-4 graphic workstation using SUNPhigs graphic software.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.172-178
• /
• 1993

This paper deals with the modeling and experiment of a robot system for force/impact control performance. The basic model is composed of a direct drive motor, servo amplifier, link, force sensor and environments. Based on the developed model, the stability of the whole system was analyzed via root locus method. For the force control, integral force compensation with velocity feedback method shows the best performance of all the explicit force control strategies. In dealing with impact, PID position control and the explicit force control method were implemented. Instead of add more damping to the robot system by velocity feedback, we developed a new passive damping method and it was also applied to enhance the damping characteristic of the system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권4호
• /
• pp.139-144
• /
• 1999

Based on the recent developments of the reliability-based structural analysis and design as well as the extending knowledge on the probabiliistic characteristics of load and resistances, the probability based design criteria have been successfully developed for many standards. Since the probabilistic characteristics depend highly on the local load and resistances, it is recognized to develop the design criterion compatible with domestic requirements. The existing optimum design methods, which are generally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of load and resistances and the basic reliability concepts. This study is directed to propose a optimum design based Expected Total Cost Minimization on P.S.C Box Girder Bridge system which could possibly replace optimum design based traditional provisions of the current code, based on the Neldel-Mead Method reliability theory.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 제21회 학술발표회 초록집
• /
• pp.152-152
• /
• 2001

• International Journal of Computer Science & Network Security
• /
• 제23권12호
• /
• pp.81-90
• /
• 2023

Cloud computing is an emerging business model popularized during the last few years by the IT industry. Providing "Everything as a Service" has shifted many organizations to choose cloud-based services. However, some companies still fear shifting their data to the cloud due to issues related to the security and privacy. The paper suggests a novel Trust based Mutual Authentication Mechanism using Secret P-box based Mutual Authentication Mechanism (TbMAM-SPb) on the criticality of information. It uses a particular passcodes from one of the secret P-box to act as challenge to one party. The response is another passcode from other P-box. The mechanism is designed in a way that the response given by a party to a challenge is itself a new challenge for the other party. Access to data is provided after ensuring certain number of correct challenge-responses. The complexity can be dynamically updated on basis of criticality of the information and trust factor between the two parties. The communication is encrypted and time-stamped to avoid interceptions and reuse. Overall, it is good authentication mechanism without the use of expensive devices and participation of a trusted third party.