• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.46-52
• /
• 2001

In this study, the generation of oxygen-free gas using catalytic combustion for industrial applications is explained ; heat treatment and copper annealing. For the experiment, Pd catalysts were determined by testing their catalytic activities over LPG in a micro-reactor. Combustion characteristics for the generation of oxygen-free atmospheric gas and the effect of flue gas upon surface oxidation were estimated form this experiment. As a result of the experimental investigation, we can state that the catalytic combustion could generate oxygen-free atmospheric gas suitable for industrial applications, but vapor produced by combustion process must be carefully considered as a new factor of surface oxidation.

• 약학회지
• /
• 제38권2호
• /
• pp.211-217
• /
• 1994

Copper intoxication and disturbance of copper metabolism induced various oxygen-derived free radicals related damages. The effect of copper ion on xanthine oxidase activity and type conversion of the enzyme which is concerned to generation of reactive oxygen species, was investigated, It was observed that xanthine oxidase activity was increased by addition of copper ion in the reaction mixture in proportional to the concentration of the metal ion until $60\;{\mu}M$, while the enzyme activity was inhibited in higher concentration of copper treatment. On the other hand, xanthine dehydrogenase activity was inhibited by copper ion addition with concentration dependently. Preincubation of enzyme source with $30\;{\mu}M$ of copper ion, which concentration marked increased the xanthine oxidase activity, unchanged the enzyme activity and type conversion compare to control in vitro system. It was also observed that copper induced xanthine oxidase activity and the enzyme type conversion was protected by dithiothreitol and penicillamine. These results indicate that the increment of the type conversion of xanthine oxidase necessarilly need the presence of copper ion in enzyme assay system.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.388-391
• /
• 1999

Well oriented Bi2212 superconductor thick films were formed successfully on a copper substrate by liquid reaction between a Cu-free precursor and Cu tape method in which Cu-free BSCO powder mixture was' printed on copper plate and heat-treated. And we examined the effect of heat-treatment atmosphere for the superconducting properties and microstructure of Bi2212. The composition of Cu-free BSCO powder mixture was Bi$_2O_3$ : SrCO$_3$ : CaCO$_3$ = 1.2~2 : 1 : 1 and the heat-treatment for the superconducting formation reaction was performed in air, oxygen, nitrogen and low oxygen pressure. At heat-treatment temperature, the printing layer partially melt by reacting with CuO of the oxidizing copper plate, and the nonsuperconducting phases present in the melt are typically Bi-free phases and Cu-free phases. Among the nonsuperconducting phases, it is known that the (Sr,Ca)CuO$_3$ phase restrain the formation of the Bi2212 superconducting phase. Because a kind of the nonsuperconducting phases is controled by the oxygen partial pressure, the optimum condition in which the remnants of the second phases don't leave in the fully processed conductor was determined by XRD and the critical tempera to re (Tc) analysis.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.585-590
• /
• 2014

Microstructural evolution in the thickness direction of an oxygen free copper processed by accumulative rollbonding (ARB) is investigated by electron back scatter diffraction (EBSD) measurement. For the ARB, two copper alloy sheets 1 mm thick, 30 mm wide and 300 mm long are first degreased and wire-brushed for sound bonding. The sheets are then stacked and roll-bonded by about 50% reduction rolling without lubrication at an ambient temperature. The bonded sheet is then cut to the two pieces of the same dimensions and the same procedure was repeated on the sheets up to eight cycles. The specimen after 1 cycle showed inhomogeneous microstructure in the thickness direction so that the grains near the surface were finer than those near the center. This inhomogeneity decreased with an increasing number of ARB cycles, and the grain sizes of the specimens after 3 cycles were almost identical. In addition, the aspect ratio of the grains decreased with an increasing number of ARB cycles due to the subdivision of the grains by shear deformation. The fraction of grains with high angle grain boundaries also increased with continuing process of the ARB so that it was higher than that of the low angle grain boundaries in specimens after 3 cycles. A discontinuous dynamic recrystallization occurred partially in specimens after 5 cycles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.299-300
• /
• 2007

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.124-129
• /
• 2001

The experimental study was the cutting characteristics of non-ferrous metals. The experimental apparatus was used the turning machine and diamond tool. This aimed at lading the optimal cutting conditions by measuring surface farm and roughness. Used non-ferrous metals were aluminum, brass and oxygen-free copper. As well, according to changing cutting conditions such as feed rate by measuring cutting farce and surface roughness and according to cutting conditions the non-ferrous metals studied about cutting properties.

• Archives of Pharmacal Research
• /
• 제19권3호
• /
• pp.178-182
• /
• 1996

Using superoxide dismutase (SOD)-deficient mutants of Saccharomyces cerevisiae, the oxidative stresses induced by 0.1 mM of copper ion $(Cu^{++})$ was studied. In aerobic culture condition, yeasts lacking MnSOD (mitochondrial SOD) showed more significant growth retardation than CuZnSOD (cytoplasmic SOD)-deficient yeasts. However, not so big differences in growth pattern of those mutants compared withwild type were observed under anaerobic condition. It was found that, under aerobic condition, the supplementation of 0.1 mM copper ioh:(Cu") into culture medium caused the remarkable increase of CuZnSOD but not so significant change in MnSOD. It was also observed that catalase activities appeared to be relatively high in the presence of copper ion in spite of the remarkable reduction of glutathion peroxidase in CuZnSOD-deficient yeasts, but the slight increments of catalase and glutathion peroxidase were detected in MnSOD-deficient strains. It implies that the lack of cytoplasmic SOD could be compensated mainly by catalase. However, these phenomena resulted in the significantincrease of cellular lipid peroxides content in CuZnSOD-deficient yeasts and the slight increment of lipid peroxides in MNSOD-deficient cells. In anaerobic cultivation supplementing copper ion, the cellular enzyme activities of catalase and glutathion peroxidase in SOD-deficient yeasts were slightly increased without any significant changes of lipid peroxides in cell membrane. It suggests that a little amount of free radicals generated by copper ion under anaerobic condition could be sufficiently overcome by catalase as well as glutathion peroxidase.dase.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.204-210
• /
• 1997

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.35.2-35.2
• /
• 2007

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.28-33
• /
• 2007

This paper describes development of low cost precision machine that has a vacuum chuck. This study mainly aims to find out a cutting condition for maintaining optimum surface condition and to examine cutting characteristics of the precision machine that is equipped by diamond bites. The cutting materials is oxygen free copper. Several experiments were carried out to find out the main factors that affect the surface roughness such as principal axis RPM(rotation per minute), feeding speed, and cutting depth. As a result, we obtain The optimum cutting condition of the developed precision machine.