• Journal of Chest Surgery
• /
• 제33권2호
• /
• pp.125-131
• /
• 2000

Background: Hyperinflation during lung ischemia has been known to improve pulmonary functions after reperfusion which may be exerted through a pulmonary vasodilation and avoidance of atelectasis by an increased surfactant release and been known whether the improvement of pulmonary function was the effect of hyperinflation itself or the oxygen content in inflation gas. Therefore we attempted to clarify the effect of hyperinflation with oxygen in pulmonary inflation gas during warm ischemia on pulmonary function after reperfusion to solve the problem of ischemia-reperfusion injury after lung transplantation. Material and Method: sixteen mongrel dogs were randomly divided into two groups: the left lung was inflated to 30-35 cm H2O with 100% oxygen in oxygen group and 100% nitrogen in nitrogen group. The inflated left lung was maintained with warm ischemia for 100 minutes. Arterial and mixed venous blood gas analysis and hemodynamics were measured before ischemia and 30, 60, 120, 180 and 240 minutes afer reperfusion. Lung biopsy was taken for the measurement of lung water content after the end of reperfusion. Result: In oxygen group arterial oxygen tension the difference of arterial and mixed venous oxygen tension and the difference of alveolar-arterial oxygen tension at 30-minute after reperfusion were not significantly different from those before ischemia and were stable during the 40hour reperfusion. However in nitrogen group these values were significantly deteriorated at 30-minute after reperfusion. there was no significant difference between two groups in hemodynamic data peak airway pressure and lung water content. Conclusion : The results indicated that the oxygenation one of the most important pulmonary functions was improved by pulmonary inflation with 100% oxygen during warm ischemia but the hemodynamics were not. Oxygen as a metabolic substrate during warm ischenia was believed to make the pulmonary tissues to maintain aerobic metabolism and to prevent ischemic damage of alveoli and pulmonary capillary.

• 공업화학
• /
• 제33권1호
• /
• pp.38-43
• /
• 2022

산소 플라즈마 처리에 따른 활성탄소의 산소 관능기 도입이 세슘 이온 흡착 특성에 미치는 영향에 대하여 고찰하였다. 산소 플라즈마 처리 시 주파수, 전력 및 산소 가스 유량은 각각 100 kHz, 80 W 및 60 sccm으로 고정하였으며, 반응시간을 변수로 수행하였다. 본 실험조건에서는 산소 가스와의 반응시간이 10분일 때 C-O-C 및 O=C-O 결합 내 산소 기능기 함량이 증가함에 따라 세슘 이온 흡착량이 증가하였다. 그러나 반응 시간이 15분일 때 산소 관능기 함량이 감소하게 되어 세슘 이온 흡착량이 오히려 감소되었다. 한편, 표면 처리된 활성탄소의 산소 함량과는 달리 그 비표면적 및 기공 특성은 산소 플라즈마 반응 시간에 따라 거의 영향을 받지 않았다. 결과적으로 산소 플라즈마 처리된 활성탄소는 미처리 활성탄소에 비하여 세슘 이온 제거율이 최대 97.3%까지 향상되었다. 이는 산소 플라즈마 처리로 활성탄소 표면에 도입된 C-O-C 및 O=C-O 결합 내 산소 기능기의 함량에 기인한 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제22권2호
• /
• pp.194-198
• /
• 2001

In order to look for polymeric materials applicable to the oxygen electrode membranes of biosensors, polyurethanes (PUs) were synthesized from poly(butylene succinate) diol (Mn 1150), poly(ethylene glycol) (Mn 200), and 4,4'-methylenebis(cyclohexyl isocyanate). The PUs (Mn 15000-100000) underwent the crystallization and melting transitions in the temperature range of 20-30 $^{\circ}C$ and 90-110 $^{\circ}C$, respectively. The oxygen permeability for the PU membranes prepared by the solution casting method could not be measured since oxygen simply leaked through the membranes with an audible noise. However, when the PUs were blended with carboxylated poly(vinyl chloride) (CPVC), the permeability could be measured. The oxygen permeability coefficient (Po2) of the PU/CPVC $(96}4)$ membranes (6.4 Barrer) was high enough for the application as the electrode membranes. The Po2 decreased dramatically when the CPVC content increased from 4 to 5 wt%, but decreased very slowly and approached to that of CPVC (~0.26 Barrer) when the CPVC content increased further. The scanning electron micrographs of the membranes revealed that the PU membranes were composed of large crystal grains with many pores, but the size of the PU crystal grains and pores decreased progressively with increasing the CPVC content.

• 자원리싸이클링
• /
• 제25권2호
• /
• pp.10-16
• /
• 2016

본 연구에서는 Inconel 713C 스크랩을 원료로 아르곤-산소 탈탄 공정을 이용하여 니켈계 초내열합금을 재활용 하였다. 아르곤-산소 탈탄 공정에서 아르곤은 1,000 sccm으로 지속적으로 주입되었고 산소는 100, 250, 500 sccm의 유량으로 10, 20, 30 분씩 주입되었다. 산소 주입 초기 단계에서는 산소 양이 증가하면서 Al, Cr, 및 Mo 함량은 증가하였고 탄소 함량은 감소하였다. 그리고 Al 함유량은 탄소의 반응이 끝난 후 Al, Cr 등의 원소와 산화가 일어났기 때문에 첨가원소와 탄소의 반응에 의해 감소하였다. 결과적으로, Al 함유량이 감소하였기 때문에 ${\gamma}^{\prime}$상이 줄어들었으며 이는 Al이 ${\gamma}^{\prime}$을 형성하는 주요 원소이기 때문이다. 또한, 탄소의 양이 줄어들면서 탄화물도 줄어들었으며 산소가 과잉 공급된 시료의 기계적인 물성(강도, 경도 등)은 감소하게 된다.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.617-622
• /
• 2011

The effect of oxygen on the shape memory characteristics in Ti-18Nb-6Zr-XO (X = 0-1.5 at%) biomedical alloys was investigated by tensile tests. The alloys were fabricated by an arc melting method at Ar atmosphere. The ingots were cold-rolled to 0.45 mm with a reduction up to 95% in thickness. After severe cold-rolling, the plate was solution-treated at 1173 K for 1.8 ks. The fracture stress of the solution-treated specimens increased from 450 Mpa to 880 MPa with an increasing oxygen content up to 1.5%. The fracture stress increased by 287MPa with 1 at% increase of oxygen content. The critical stress for slip increased from 430 MPa to 695 MPa with an increasing oxygen content up to 1.5 at%. The maximum recovery strain of 4.1% was obtained in the Ti-18Nb-6Zr-0.5O (at%) alloy. The martensitic transformation temperature decreased by 140 K with a 1.0 at% increase in O content, which is lower than that of Ti-22Nb-(0-2.0)O (at%) by 20 K. This may have been caused by the effect of the addition of Zr. This study confirmed that addition of oxygen to the Ti-Nb-Zr alloy increases the critical stress for slip due to solid solution hardening without being detrimental to the maximum recovery strain.

• Nuclear Engineering and Technology
• /
• 제8권3호
• /
• pp.151-157
• /
• 1976

냉간가공한 질칼로이-4의 가공시효(strain ageing) 현상이 진공속에서 변형온도 및 1143ppm-3500ppm의 산소 함량의 변수로써 조사되었다. 가공시효 현상이 0-10 % 냉간가공한 질칼로이-4의 경우 200-45$0^{\circ}C$의 온도구간에서 조사되었으며, 이때 가공시효 현상은 냉간가공량이 증가할수록 감소하는 현상을 보였다. 이 냉간가공에 따른 가공시효의 감소는 냉간가공시 발생한 결함에 의해 산소 원자들이 trapping 되는 결과로 기인된 것으로 고려된다. 냉간가공된 질칼로이-4의 최대 가공시효 응력은 함유된 산소의 량의 평방근에 비례한다는 사실이 밝혀졌다.

• 한국작물학회지
• /
• 제49권1호
• /
• pp.46-51
• /
• 2004

The film coated snap bean (Phaseolus vulgaris) seeds with five different coating materials treated with 3% increase in seed weight were planted at sandy loam soil controlled moisture content of 18, 19, 20 and 21 %. The oxygen diffusion rate (ODR) was calculated from the different moisture content soil. The number of normal seedlings, seedling vigor, and seedling capability in field (seed vigor x dry matter weight) were observed at 9 days after planting and compared to the changes of ODR. The germination rate and ODR were sharply decreased simultaneously in the seeds planted at 21 % soil moisture content. Seedling emergence did not occur at all as the soil moisture content increased above 22 %. Hence this value should be considered as the threshold of soil moisture content for seedling emergence. An ODR value under 20% did not influence the percent emergence significantly. The certain difference observing in the emergence at the same ODR was not related clearly to the condition of soil. So it can be assumed that the limit of soil moisture content for the emergence of snap bean was approximately 20%. The value of 18% soil moisture content may be considered as the optimum for snap bean emergence. There was close relationship between the mean value of ODR in different soil moisture contents and the emergence. The germination rates of the seeds coated with the different materials were quite different when the seeds were planted at 21 % soil moisture. Dry weight of the seedlings from film coated seeds was decreased slightly, but the germination rates were not much different from the non-treated control under relatively higher soil moisture content (21 %). Major factor lowering emergence rate was oxygen stress while film coating act as a minor constraint for snap bean sown in excess soil moisture condition.

• 생명과학회지
• /
• 제19권4호
• /
• pp.538-542
• /
• 2009

본 연구는 itaconic acid로부터 합성한 새로운 soft contact lens 소재의 함수율과 산소투과도를 확인 하였다. Soft contact lens의 새로운 polymer소재 개발을 위하여 기본 monomer인 HEMA (2-hydroxyethyl methacrylate)와 가교제로서 EGDMA (ethylene glycol dimethacrylate) 그리고 A. itaconicus의 발효에 의해 생산된 itaconic acid로부터 얻어진 mono-ester 1과 di-ester 2를 새로운 첨가제로 사용하여 중합반응을 시도하였다. Soft contact lens의 새로운 폴리머 소재들은 HEMA와 mono-ester 1 또는 di-ester 2를 서로 다른 비율로 합성하여 함수율(water content)과 산소투과도(oxygen permeability)를 분석하였다. Polymer 형성을 위한 HEMA와 additive의 혼합에서 HEMA/mono-ester 1의 혼합물은 HEMA/di-ester 2 보다 함수율과 산소투과도가 뛰어 났으며 HEMA와 첨가제 mono-ester 1 (15%)를 이용한 중합의 경우, 제작된 soft contact lens의 함수율과 산소투과도는 각각 57.7%와 28.6 Dk로 좋은 값을 나타냈다. 새로운 소재를 사용하여 만든 soft contact lens의 함수율과 산소투과도는 우수하게 나타났다.

• 한국표면공학회지
• /
• 제42권5호
• /
• pp.220-226
• /
• 2009

Cr-O-N coatings having different oxygen contents were deposited on Si wafer and SUS 304 substrates by an arc ion plating technique using Cr target in $Ar/O_2/N_2$ gaseous atmosphere. As increasing oxygen content in the coating, the microstructure of Cr-O-N coating changed from polycrystalline having NaCl structure to amorphous structure. Further increase of oxygen content resulted in phase transformation from amorphous to rhombohedral structure. From the variations of d value and average grain size, it was revealed that the maximum solubility of oxygen in Cr-O-N coating was about 21 at.%. And the maximum micro-hardness of 2751HK was obtained in this composition. The lowest friction coefficient was measured in the coating having 34.8 at.% of oxygen. However, more narrow width of wear track was found in the coating having 30.1 at.% of oxygen.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.91-95
• /
• 2000

8인치 쵸크랄스키 실리콘 단결성 성장에 있어서, 계면에서의 온도기울기, 산소, 농도 및, 반경방향의 산소농도 분포에 미치는 아르곤 가스 유동의 영향을 조사하였다. 아르곤의 유입량을 증가시킴에 따라 계면 근처 결정내 온도기울기가 증가하였으며. 결정내 산소농도는 감소하였다. 한편, 반경방향의 산소농도 균일성은 악화됨이 관찰되었다. 실험 결과를 종합하여 볼 때, 아르곤 유동이 산소 농도 및 균일 분포성 등의 결정 특성에 중요한 영향을 미치는 성장 공정변수임을 확인할 수 있었다.